• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.860-864
• /
• 2004

This article discusses the use of pulse-echo ultrasonic testing for the stress analysis of adhesive bonds between metal sheets. The method is based on the measurement of the reflection wave at the metal/adhesive interface. After describing briefly the physical aspects of the phenomenon, an index is defined to detect defective zone of the joint(both for the lack of adhesive and for insufficient adhesion); the influence of the experimental variables(variables stress...) on the measurement is discussed. By means of a control experiment it is shown that Stress Variation in Adhesive Joints are separate to be distingguished. In this paper, Quantitative Nondestructive Evaluation in Adhesive Joints are together with Ultrasonic Testing and Finite Element Method.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.26 no.6
• /
• pp.440-446
• /
• 2006

The reactor vessel body and closure head are fastened with the stud bolt that is one of crucial parts for safety of the reactor vessels in nuclear power plants. It is reported that the stud bolt is often experienced by fatigue cracks initiated at threads. Stud bolts are inspected by the ultrasonic technique during the overhaul periodically for the prevention of failure which leads to radioactive leakage from the nuclear reactor. The conventional ultrasonic inspection for stud bolts was mainly conducted by reflected echo method based on shadow effect. However, in this technique, there were numerous spurious signals reflected from every oblique surfaces of the thread. In this study, ultrasonic phased array technique was applied to investigate detectability of flaws in stud bolts and characteristics of ultrasonic images corresponding to different scanning methods, that is, sector and linear scan. For this purpose, simplified stud bolt specimens with artificial defects of various depths were prepared.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.7 no.1
• /
• pp.32-41
• /
• 1987

As a new device of stress monitoring method, ultrasonic backscattering method has been used to aluminium samples with various grain sizes at rayleigh critical angle in order to observe the relationships between applied stress and ultrasonic backscattered energy. It was found that the ultrasonic backscattered energy was observed to decrease as the grain size increased at the given applied stress. At the same grain size, the ule ultrasonic backscattered energy increased with increasing the applies stress. Through this study, we provided some possibility to evaluate stresses in materials under loads nondestructively, and this method is expected to be used as a new stress monitoring device.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.3
• /
• pp.189-200
• /
• 2005

Ultrasonic inspection methods are widely used for detecting flaws in materials. One of the more popular methods involves the extraction of an appropriate set of features followed by the use of a neural network for the classification of the signals in the feature space. This paper describes an approach which uses LMS method to determine the coordinates of the ultrasonic probe followed by the use of SAFT to estimate the location of the ultrasonic reflector The method is employed for classifying NDE signals from the steam generator tubes in a nuclear power plant. The classification results using this scheme for the ultrasonic signals from cracks and deposits within steam generator tubes are presented.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.6
• /
• pp.576-581
• /
• 2007

Ultrasonic nonlinearity has been considered as a promising method to evaluate the micro damage of material; however, its magnitude is so small that its measurement is not easy. Especially, when we use contact PZT transducer, if the contacting pressure is not kept in constant during the measurement then there exists extraneous fluctuation in the measured nonlinearity caused by the unstable contact condition, In this paper, we developed a pneumatic control system to keep the contacting pressure of transducer in constant during the measurement and analyzed the effect of contacting pressure to the ultrasonic nonlinearity measurement As a result, we found that the pressure of transducer in our measurement system should be greater than 170 kPa to measure the ultrasonic nonlinear parameter in stable with no dependency on the contacting pressure.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.14 no.2
• /
• pp.83-89
• /
• 1994

It is important for an ultrasonic testing to know the sound pressure field and the directivity of ultrasonic waves propagating in a solid. The directivity of ultrasonic wave is closely related to the sensitivity, the scanning pitch, the arrangement of angle probe, and the defect kind in ultrasonic testing. This paper describes on the directivity measurement of ultrasonic wave using ultrasonic wave visualization method. The directivity of the shear wave emitted from the angle probes were constant during propagation. The difference of directivity was existed between 2MHz and 4MHz angle probes. The centers of directivity were located backward from the incident poing and inside of the angle probe and were not changed during the wave propagation.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.2
• /
• pp.151-157
• /
• 2004

Ultrasonic testing is a kind of nondestructive test to detect a crack or discontinuity in materials or on material surfaces by sending ultrasound to it. This conventional ultrasonic technique has some limitations in reliably detecting crack or accurately assessing materials in the case of complex-shaped power plant components such as a turbine blade root. An alternative method for such a difficult inspection is highly needed. In this study, application of a phased array ultrasonic testing (UT) system to a turbine blade, one of the critical power plant components, has been considered, and the particular incident angle has been determined so that the greatest track detectability and the most accurate crack length evaluation nay be achieved. The response of ultrasonic phased array was also analyzed to establish a special method to determine the track )ength without moving the transducer. The result showed that the developed method for crack length assessment is a more accurate and effective method, compared with the conventional method.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.553-560
• /
• 2001

Recently, ultrasonic testing simulation has becomes very important in the field of nondestructive evaluation due to its unique capability of providing testing signals without real inspection. The ultrasonic testing simulation requires three elementary models including the transducer beam radiation model, the flaw scattering model, and the reception model. In the present work, we briefly describe an approach to develop the ultrasonic testing model together with its elementary models with the multi-gaussian beam model. Based on this approach, we developed ultrasonic testing simulation program with MATLAB. The performance of the developed program is demonstrated by the predicting of ultrasonic signals from two types of flaws, circulars crack and spheres.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.10 no.2
• /
• pp.32-37
• /
• 1990

A computer controlled 5 axis ultrasonic testing system is developed in order to detect flaws in special parts with complex shape. The various kinds of ultrasonic test can be performed automatically using computer program which was developed by DHI(Daewoo Heavy Industries Ltd.). By use of this computer program, the detector location can be programed and the amplitude signal of echo can be processed digitally. The test results can be plotted graphically on a high resolution display monitor in real time base. The test data can be also saved in magnetic memory devices(HDD or FDD) as well as in the form of hard copy through color printer. The computer software contains c- scan, c+a scan processing programs as well as statistical analysis for test data.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.9 no.1
• /
• pp.98-105
• /
• 1989

Detection of creep damages in centrifugally cast HK-40 reformer furnace catalyst tube is a common problem for the safety and scheduled operation of chemical plants. This study was focused on the development of an automatic ultrasonic scanning device with which the creep damage of welded zone of HK-40 reformer tubes is detected and evaluated.