• 비파괴검사학회지
• /
• 제23권6호
• /
• pp.635-644
• /
• 2003

To ensure the reliability of ultrasonic nondestructive testing techniques for modern structural materials, the effects of anisotropy and inhomogeneity and the influence of non-planar component geometries on ultrasonic wave propagation have to be taken into account. In this article, fundamentals and applications of two analytical approaches to three-dimensional elastic beam field calculation are presented. Results for both isotropic materials including curved interfaces and for anisotropic media like composites are presented, covering field profiles for various types of transducers and the modeling of time-dependent rf-signals.

• 비파괴검사학회지
• /
• 제34권1호
• /
• pp.77-84
• /
• 2014

• 비파괴검사학회지
• /
• 제22권6호
• /
• pp.627-636
• /
• 2002

Identification and sizing of surface breaking vertical cracks using angle beam ultrasonic testing in practical situation quite often become very difficult tasks due to the presence of non-relevant signals caused by geometric reflectors. The present work introduces effective and systematic approaches to take care of such a difficulty by use oi angle beam ultrasonic testing models that can predict the expected signals from various targets very accurately. Specifically, the model-based TIFD (Technique for Identification of Flaw signals using Deconvolution) is Proposed for the identification of the crack tip signals from the non-relevant geometric reflection signals. In addition, the model-based Size-Amplitude Curve is introduced for the reliable sizing of surface breaking vertical cracks.

• 비파괴검사학회지
• /
• 제4권2호
• /
• pp.15-19
• /
• 1985

Computerization of ultrasonic scanner is considered to achieve more quantitative and reliable ultrasonic testing. Testech LS-24 ultrasonic scanner is modified, and step motors in this modified ultrasonic scanner are driven by multiprogrammer controlled by computer. Two step motors can be controlled independently and simultaniously. The performance of computerized ultrasonic scanner is examined entloying modified C scan for a flat bottom hole ultrasonic reference block.

• 비파괴검사학회지
• /
• 제17권2호
• /
• pp.108-113
• /
• 1997

현재 널리 사용되고 있는 비파괴검사중의 하나인 초음파탐상검사(ultrasonic testing)는 교량, 발전소, 석유화학프랜트 및 중공업분야 등에 사용되는 각종 구조물의 사용전 중검사에 폭넓게 응용되고 있으며, 구조물의 안전관리와 품질관리에 필수적으로 요구되고 있다. 또한, 이들 구조물에 존재하는 결함에 대한 정량적 평가 및 검사 데이타의 해석에 많은 연구가 진행되고 있다. 기존의 초음파탐상검사에 사용되는 휴대용 초음파탐상기의 단점을 보안하기 위해 컴퓨터 내장형 초음파탐상기가 선진국에서 개발되고 있으며 다양한 소프트웨어의 사용에 따른 검사 신뢰도가 향상되고 있다. 본 연구는 컴퓨터 내장형 초음파탐상기를 구성하고, 이를 콘트롤할 수 있는 프로그램, 검사 결과의 저장 및 신호 처리 해석이 가능한 소프트웨어를 개발하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제5권4호
• /
• pp.155-160
• /
• 2001

KS-code(KS B 0896) for nondestructive ultrasonic testing classifies the quality level by relative flaw size only. But flaw position is more important than the flaw size. Test blocks having artificial holes near surface show lower yield load than the blocks having deeply located holes from the surface. So, level calibration table was proposed for classifying the quality level of welded steel structures.

• 비파괴검사학회지
• /
• 제10권1호
• /
• pp.65-72
• /
• 1990

Comparison of acoustic emission, ultrasonic testing and crack gauge in 3-point bending testing have been studied. As the results, COD is indirectly assumed by strain gauge rate and grid pitch width when crack gauge grid is out. Acoustic emission is qualitatively able to measure crack growth by total count but ultrasonic testing has a difficulty in measuring it because of echo height fluctuation according to the change and pressure of UT. probe.

• 비파괴검사학회지
• /
• 제9권2호
• /
• pp.25-36
• /
• 1989

This essay is a general review of the application of ultrasonic NDE techniques to the performance assessment and characterization of composite materials. A brief review of ultrasonic input-output characterization of a composite plate by shear waves is presented. A theoretical development of ultrasonic wave propagation in isotropic and anisotropic media excited, respectively, by a circular transducer and an oscillatory point source is summarized. Some experimental results are described in which ultrasonic velocity and attenuation measurements give insight into material degradation of fatigued composite laminates. Ultrasonic determination of the elastic constants of a composite plate and an experimental attempt at ultrasonic testing of an isotropic plate containing a crack are also included. A recent effort for the characterization of viscoelastic materials using the ultrasonic NDE technique is outlined. Finally, the reliability of ultrasonic NDE is briefly touched upon.

• 비파괴검사학회지
• /
• 제11권1호
• /
• pp.44-51
• /
• 1991

This paper describes the practical difficulties experienced with ultrasonic testing during site fabrication of the offshore structures, and indicates some of the problems when UT indications are evaluated according to written procedure which is prepared to the requirements of the applicable code (standard) and/or specification.

• 비파괴검사학회지
• /
• 제20권2호
• /
• pp.116-129
• /
• 2000

초음파검사에서 발생하는 물리적 현상의 복잡성을 고려할 때, 이를 이론적으로 모델링하기 위해 수치적인 기법을 이용하는 것이 효과적인 경우가 많다. 본 논문에서는 초음파검사를 수치적으로 모델링하는 기법들에 대하여 개괄적으로 살펴보고, 특히 유한차분법과 유한요소법에 대하여 상세히 알아본다. 즉, 유한차분법과 유한요소법을 이용한 해석의 개요를 설명하고, 이들의 적용시 고려사항 및 문제점에 대해 알아 본 후, 기존의 연구결과 중 중요한 것들을 참고문헌으로 열거하고 몇 가지 예를 소개한다. 계속되는 컴퓨터의 기술적 발전으로 인하여 초음파검사에 대한 수치적 모델링 기법의 신뢰성과 편의성이 지속적으로 증대될 것으로 기대된다.