• Wind and Structures
• /
• 제12권6호
• /
• pp.553-574
• /
• 2009

This paper presents statistical analysis results of wind speed and atmospheric turbulence data measured from more than 30 anemometers installed at 15 different height levels on 325 m high Beijing Meteorological Tower and is primarily intended to provide useful information on boundary layer wind characteristics for wind-resistant design of tall buildings and high-rise structures. Profiles of mean wind speed are presented based on the field measurements and are compared with empirical models' predictions. Relevant parameters of atmospheric boundary layer at urban terrain are determined from the measured wind speed profiles. Furthermore, wind velocity data in longitudinal, lateral and vertical directions, which were recorded from an ultrasonic anemometer during windstorms, are analyzed and discussed. Atmospheric turbulence information such as turbulence intensity, gust factor, turbulence integral length scale and power spectral densities of the three-dimensional fluctuating wind velocity are presented and used to evaluate the adequacy of existing theoretical and empirical models. The objective of this study is to investigate the profiles of mean wind speed and atmospheric turbulence characteristics over a typical urban area.

• 비파괴검사학회지
• /
• 제16권4호
• /
• pp.241-250
• /
• 1997

액체/고체 경계면에서 후방 복사된 초음파의 주파수 분석에 의해 Si layer/mesh Au/Si substrate 시편에 존재하는 표면 탄성파의 주파수 의존성이 측정되었다. 사용된 광역 탐촉자(2, 5, 10MHz)의 주파수에 따라 다르게 나타난 후방 복사의 입사각 의존성은 이 현상이 표면 지역에 발생된 표면파로부터의 에너지 복사에 의한 것임을 보여주었다. 후방 산란된 초음파의 입사각 의존성을 연속적으로 측정하기 위한 초음파 각도계가 제작되었고 다른 비율의 구리 분말이 섞인 에폭시에 의해 접착된 Ni layer/Al substrate 시편에 대해 후방복사 세기의 입사각 의존성이 측정되었다. (5MHz) 후방 복사의 폭과 패턴은 표면파 속도의 주파수 의존성, layer 접합의 질 그리고 표면 지역의 구조 등 여러 정보를 가지고 있음이 밝혀졌다.

• 수산해양기술연구
• /
• 제29권4호
• /
• pp.292-300
• /
• 1993

Acoustical imaging has made brilliant progress in the medical science field, and has also made much progress in the nondestructive testing and under water acoustics applications since doctor Dussik brother has studied about possibilities of making images of brain by recording variations in the intensity of ultrasonic beam from head in 1937. In this paper an acoustical image is reconstructed with the power spectra analysed by impulse ultrasound wave generated by electrodynamic transducer(EDT). The EDT generates the impulse ultrasound of 77KHz in center frequency and 120KHz in bandwidth at -20dB by 1200V exciter in this experiment. The impulse ultrasound has the dominant frequency components of 47KHz, 177KHz, 110KHz and 155KHz. The U shape object is adopted in making an acoustical image. The resulted spectral acoustical images are different from the optical view of the U shape object. However the image reconstructed from 110KHz spectrum is very similar to the original optical shape of the object. Even KHz level impulse sound of 70$\mu$sec pulse width is found to be useful in reconstructing acoustical imaging improvement.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.103-106
• /
• 2004

Impact location monitoring is one of the major concerns of the smart health monitoring. For this application, multipoint ultrasonic sensors are to be employed. In this study, a multiplexed FBG sensor system with wide dynamic range was proposed and stabilization controlling system was also developed for the maintenance of maximum sensitivity of sensors. For the intensity demodulation system of FBG sensors, Fabry-Perot tunable filter(FP-TF) with 23.8nm FSR(free spectral range) was used, which behaves as two separate filters between $1530 \~ 1560$ nm range. Two FBG sensors were attached on the bottom side of the graphite/epoxy composite beam specimen, and low velocity impact tests were performed to detect the one-dimensional impact locations. Impact locations were calculated by the arrival time differences of the impact longitudinal waves acquired by the two FBGs. As a result, multiplexed in-line FBG sensors could detect the moment of impact precisely and found the impact locations with the average error of 1.32mm.

• 한국재료학회지
• /
• 제12권9호
• /
• pp.735-739
• /
• 2002

$(Y,Gd)BO_3$: Eu, $Zn_2$$SiO_4$ : Mn and $BaMgAl_{10}$ $O_{17}$ : Eu phosphors used in PDP were continuously irradiated by vacuum ultra violet generated from the penning gas (96%Ar+4%Xe) discharge and then the change of emitting intensity with time was investigated. The brightness of these phosphors decreased exponentially with VUV excitation time. The experimental data showed that the degradation rate increased in the order of $Zn_2$$SiO_4$ : Mn>(Y,Gd)$BO_3$: Eu>$BaMgAl_{10}$ $O_{17}$ : Eu phosphor. This different degradation property of phosphors was interpreted in terms of brightness saturation and stability against VUV irradiation. It was found that the degradation property of $(Y,Gd)BO_3$ : Eu red phosphor synthesized by ultrasonic thermal spray was superior to commercial phosphor.

• 한국추진공학회지
• /
• 제22권1호
• /
• pp.72-79
• /
• 2018

초음파 진동자에 의해 미립화된 케로신 분무연소의 OH 라디칼과 CH 라디칼의 자발광 특성을 고찰하기 위한 실험이 수행되었다. ICCD 카메라를 이용하여 분무화염의 자발광 강도를 측정하였으며, 연소 시 소모된 연료량은 정밀유량측정법으로 계측하였다. 그 결과, 연료소모율은 수송기체인 공기 공급유량에 선형적으로 증가하였으며, 분무연소의 특징인 전형적인 그룹 연소가 관찰되었다. OH 라디칼과 CH 라디칼을 분석한 결과, 분사방향으로의 유량 증가에 따라 라디칼 방사강도의 최댓값은 감소하고 그 위치는 후류로 이동하여 반응대의 폭은 증가하였다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제18권5호
• /
• pp.39-45
• /
• 2013

Many researchers have studied the effectiveness of ultrasound in chemical and environmental engineering fields including material synthesis, pollutant removal, cleaning, extraction, and disinfection. Acoustic cavitation induced by ultrasound irradiation in aqueous phase can cause various sonophysical and sonochemical reactions without any chemicals. However most of the previous studies focused only on the relationships between ultrasonic conditions and the results of sonochemical reactions in lab-scale sonoreactors. As a results of this, only a few studies have been devoted to design and optimization of industrial scale sonoreactors. In this study, the effect of the distance between two opposite transducer modules on sonochemical reactions was investigated in single and dual irradiation systems (334 kHz) for four distances including 50, 100, 150, and 200 mm using KI dosimetry. It was found that the dual irradiation systems provided higher performance in terms of the zeroth reaction coefficient and the cavitation yield compared to the single irradiation systems. The sonochemiluminescence (SCL) images for the visualization of the cavitation field showed that cavitation active zone was larger and sonochemical reaction intensity was much higher in the dual irradiation system than in the single irradiation system.

• 한방재활의학과학회지
• /
• 제32권1호
• /
• pp.145-155
• /
• 2022

The purpose of this study is to evaluate the effectiveness of traditional Korean medicine treatment of cervical vertigo. Three patients were diagnosed as cervical vertigo with correlating symptoms of imbalance and dizziness with neck pain. The diagnosis of cervical vertigo is also dependent on excluding other vestibular disorders on the basis of history, examination, and vestibular function tests. They were treated by acupuncture, transcutaneous electrical nerve stimulation therapy and low-intensity pulsed ultrasound at acupoints and sympathetic ganglion chain of their cervical and upper thoracic region. The evaluation of clinical outcome was done by numeric rating scale (NRS), dizziness handicap inventory (DHI) and neck disability index (NDI), EuroQol-five dimensions questionnaire (EQ-5D) index. After the treatment, the value of their NRS, NDI, DHI was significantly decreased and their EQ-5D index was significantly increased. The traditional Korean medicine treatment at cervical and upper thoracic region could be an effective way to treat cervical vertigo.

• Wind and Structures
• /
• 제39권2호
• /
• pp.111-123
• /
• 2024

The atmospheric turbulence characteristics measured at a meteorological station in northwest part of the Czech Republic are presented for selected time periods in the year 2017. The terrain of this region is influenced by surface coal mining and the related industry. The datasets used in this study were measured using four ultrasonic anemometers installed on an 80 m high meteorological mast at heights of 20, 40, 60 and 80 m, respective. From the primary high-frequency datasets, time intervals in order of hours were selected and integral turbulence characteristics (ITCs), turbulence intensities and turbulence spectra were analyzed. The time intervals were selected with respect to atmospheric stability parameter, known as Obukhov number. We concentrated on the days with higher wind velocity and neutral atmospheric stratification. The wind characteristics investigated in this study include the wind speed, wind direction and its histograms, turbulence intensity, friction velocity and wind power spectra. The ITCs and spectral characteristics were compared with the theoretical models and values from the literature. The resulting ITCs showed the values for urban locations similar to those found in other studies and can be used in practical design. The computed turbulence spectra followed the shape of theoretical spectra of turbulence for both horizontal and vertical velocity components. The computed integral length scales have shown to be unsuitable for further use due to their highly scattered values.

• 공업화학
• /
• 제20권3호
• /
• pp.322-328
• /
• 2009

Octamethylcyclotetrasiloxane (OMCTS)을 에멀젼 상태에서 초음파를 조사하여 polydimethylsiloxane (PDMS)을 중합하였다. 중합에 활용된 초음파 반응기는 주파수가 20 KHz의 horn 유형과 40 KHz의 bath 유형이었으며, horn과 bath를 혼용한 경우의 중합 공정의 특성도 평가해 보았다. 고려된 주요 변수들은 반응 온도와 초음파 조사 시간 이었으며, 중합물에 대하여 각 시료의 고유 점도와 전환율 측정을 통하여 각 중합공정의 효율성과 특성을 조사하고, 최적의 공정 조건을 도출해 보고자 하였다. Horn 유형의 반응기에서는 수 분 이내에 80% 이상의 전환율이 달성되고 높은 점도의 PDMS를 얻을 수 있었으나, 조사 시간에 따라 전환율과 점도는 최대값을 보인 이후에 감소하는 경향을 나타내었다. 초음파의 강도가 상대적으로 약하게 유지되는 bath 유형의 반응기에서는 1 h 이상의 조사가 필요하였으며, horn 유형과 달리 전환율과 점도가 조사 시간에 따라 지속적으로 증가하는 경향이 지배적이었다. Horn유형과 bath유형을 조합한 혼합형 반응기에서는 다른 반응기와는 매우 다른 결과들이 나타났으며, 각 반응기의 특성은 전산 모사를 이용한 반응기 내의 음파 해석을 바탕으로 설명되었다.