• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.3
• /
• pp.74-82
• /
• 2002

본 논문에서는 제한된 전파자원을 가장 효율적으로 사용할 수 있는 유력한 후보로 떠오르고 있는 UWB(Ultra Wide Band)무선기술의 도입을 위한 미국, 유럽 및 국제전기통신연합(ITU)에서의 규제정책 동향을 소개하고자 한다 특히 채근에 미국 FCC에서 제한적 범위의 주파수 사용허가가 이루어진 것을 계기로 UWB 무선기술 상용화가 활발히 이루어질 것이므로 이와 관련하여 FCC의 전파 규제 제도를 분석하여 소개하였다. 또 IEEE산하 802.15.3 working group에서 진행되고 있는 무선 개인 통신(Wireless Personal Communication)방식으로 UWB 시스템을 사용하기 위한 표준화 작업에 관한 최신 동향도 소개하고자 한다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.7
• /
• pp.704-709
• /
• 2007

In this paper, a CPW band-pass filter with a rejection band is proposed for UWB(Ultra-Wideband) communication systems. The proposed filter has a band-pass characteristic of wide-band by inserting only a slot in $50{\Omega}$ transmission line. To obtain the band-rejection function at WLAN frequency band($5.15{\sim}5.725GHz$), the designed filter is combined with folded slot resonators on the ground plane of the CPW structure. The fabricated CPW band-pass filter shows a compact size of $15.35{\times}13.60mm$, a wide passband of 2.8 GHz to 9.8 GHz and the narrow stop-band of 5.15 GHz to 5.71 GHz for 3-dB bandwidth. Also, the measured group delay is less than 400 psec throughout the operation frequency band except the rejection band.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.7
• /
• pp.1313-1319
• /
• 2017

In this paper, we evaluate the performance of multi-hop transmissions in IEEE 802.15.6 ultra wide band (UWB) wireless body area network (WBAN). The packet structure in the physical layer, and encoding and decoding are considered for multi-hop transmissions in IEEE 802.15.6 UWB WBAN. We analyze the data success rate and energy efficiency of multi-hop transmissions with considering the length of data payload, transmission power, and distances between the nodes in IEEE 802.15.6 UWB WBAN. Through simulations, we evaluate the data success rate and energy efficiency of multi-hop transmissions with varying the length of data payload, transmission power, and distances between the nodes in IEEE 802.15.6 UWB WBAN. Finally, we can select an energy-efficient multi-hop transmission in IEEE 802.15.6 UWB WBAN depending on the length of data payload, transmission power, and distances between the nodes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2C
• /
• pp.187-198
• /
• 2004

In this paper, we analyze the performance of BPM (Bi-Phase Modulation) UWB (Ultra Wide Band) multiple access system using PN (Pseudo Noise) code based time hopping sequence in indoor wireless channels. In particular, we compare BPM UWB multiple access system with PPM (Pulse Position Modulation) UWB multiple access system in terms of signalling and demodulation schemes. Moreover, we analytically evaluate the performance of these UWB systems by deriving the bit error rate expressions under the assumption that pulse energy and data transmission rate are identical for both systems. Simulation results in additive white Gaussian noise and realistic indoor multipath wireless channels show that the performance of BPM scheme is approximately 1 dB better than that of PPM scheme. However, the performance discrepancy becomes negligible as the number of users increases.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.11C
• /
• pp.1498-1509
• /
• 2004

In this paper, we evaluate the performance of a noncoherent OOK (On-Off Keying) UWB (Ultra Wide Band) system based on power detection with noise power calibration and noise power windowing for ubiquitous sensor network applications in typical indoor wireless channels. Utilizing noise power calibration and noise power windowing, the current noise information can be initially or adaptively provided to determine suitable detection threshold value for signal demodulation. Simulation results show that the noncoherent OOK UWB system using noise power calibration achieves good BER (Bit Error Rate) performance which is favorably comparable to that of the system using the ideal adaptive threshold, while maintaining simple receiver structure. However, despite the serious loss of the data transmission rate, the performance improvement by noise power windowing is not so remarkable. furthermore, these performance results are similarly maintained in BEE 802.15 Task Group 3a UWB indoor channel model, and it is also revealed that the BER performance can be significantly improved by increasing the pulse repetition rate.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.12
• /
• pp.2136-2139
• /
• 2008

Chaotic oscillators can generate wide-band signals and the spectrum characteristics of the wide-band signals are not changed by switching on and off the output power of the oscillators. When communication systems use a chaotic oscillator, the communication system need not a local oscillator and a mixer used in conventional transceivers. Therefore the configuration of a communication system using a chaotic oscillator is simple and have the characteristics of low-power consumption. In this paper we design and implement a chaotic oscillator. And the test results of the implemented chaotic oscillator for UWB systems are presented. The implemented chaotic oscillator has -8.11dBm of the output power with 500MHz channel bandwidth at 3.4GHz of the center frequency and has about 410MHz of -10dB bandwidth.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.2 s.93
• /
• pp.199-203
• /
• 2005

In this paper, a novel compact and frequency band-notch antenna for Ultra-Wideband(UWB) applications is proposed. The designed antenna not only shows good impedance bandwidth for ultra-wideband but has band notch characteristic for the frequency band of $5.15\~5.825\;GHz$ limited by IEEE 802.1la and HIPERLAN/2. To achieve both properties of wide band and band notch, the techniques of a concaved ground plane and inserted U-shaped thin slot into planar radiator are used respectively. A manufactured antenna satisfied VSWR<2 for the frequency band of $2.95\~11.7\GHz$ except the limited band of $4.92\~5.866\;GHz$.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.1
• /
• pp.138-143
• /
• 2009

In this paper, a novel ultra-wide band filter which is operating at frequency bands from 3.1 GHz to 10.6 GHz is suggested. It is modified from the conventional ring filter and consisted of a ring with two parallel open-stub with length of ${\lambda}/8$. It improves the sharpness of the conventional ring filter and is compact. The measured results show that the fabricated filter has a insertion loss of 2.1 dB and the measured group delay of the filter is less than 463 ps through UWB frequency bands.

• Journal of Advanced Navigation Technology
• /
• v.9 no.1
• /
• pp.1-8
• /
• 2005

In this paper, an impulse generator for UWB(Ultra Wide-band) technique with great possibility to be adopted as a next generation indoor WLAN(Wireless Local Area Network) has been designed by using SRD(Step Recovery Diode). Design goal is to design an impulse generator with simple structure, low cost, small size, and high performance. The impulse generator satisfied by FCC's regulation ( frequency range: 3.1~10.6 GHz, limit of power level: -41.25 dBm ) has been simulated by using ADS(Advanced Design System) which is the trade name of the Agilent Technologies. The output power of the impulse generator has been explained separately for single and multi band purposes, respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.2
• /
• pp.303-310
• /
• 2014

We show improved throughput scaling laws for an ultra-wide band (UWB) ad hoc network, in which n wireless nodes are randomly located. First, we consider the case where a modified hierarchical cooperation (HC) strategy is used. Then, in a dense network of unit area, our result indicates that the derived throughput scaling depends on the path-loss exponent ${\alpha}$ for certain operating regimes due to the power-limited characteristics. It also turns out that the HC protocol is dominant for 2 < ${\alpha}$ < 3 while using the nearest multihop (MH) routing leads to a higher throughput for ${\alpha}{\geq}3$. Second, the impact and benefits of infrastructure support are analyzed, where m base stations (BSs) are regularly placed in UWB networks. In this case, the derived throughput scaling depends on ${\alpha}$ due to the power-limited characteristics for all operating regimes. Furthermore, it is shown that the total throughput scales linearly with parameter m as m is larger than a certain level. Hence, the use of either HC or infrastructure is helpful in improving the throughput of UWB networks in some conditions.