• 제목/요약/키워드: Ultra-violet rays

검색결과 35건 처리시간 0.024초

굴절률 1.60 광변색성 자외선 차단기능을 갖는 편광안경렌즈 연구 (A study on the polarized spectacle lens with photochromic UV blocking function of refractive index 1.60)

  • 한두희
    • 융합정보논문지
    • /
    • 제8권1호
    • /
    • pp.147-152
    • /
    • 2018
  • 자외선 완전차단 및 청색광을 일부 차단하고 광변색성을 가지는 편광안경렌즈를 개발하였다. 심야 운전이나 반사광에 의한 눈부심을 획기적으로 줄이고 자외선이 강한 공간에서는 선글라스 역할을 하며 평상시는 안경렌즈로 사용할 수 있는 기능성 안경렌즈이다. 광변색성은 명반응에서는 0.5초 암반응에서는 3초 정도의 회복시간이 걸렸다. 편광기능은 95% 정도를 얻었다. 자외선은 완전히 차단되었고 청색광은 30%정도의 저감 효과를 얻었다. 광변색성 및 자외선차단기능과 편광기능을 하나로 결합한 렌즈는 국내 시장을 조사한 결과 최초의 시도이다.

자외선램프를 이용한 선박평형수 처리시스템의 설계 및 제작 (Design and Fabrication of a Ballast Water Treatment System Using UV Lamps)

  • 표태성;천상규;박대원;최성국;김성연;길경석
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제33권6호
    • /
    • pp.952-958
    • /
    • 2009
  • The International Maritime Organization (IMO) has adopted the ballast water management convention at a diplomatic conference in early 2004 that all ships should be equipped with a treatment system from 2010 gradually. In this paper, the disinfection characteristic of ultra-violet (UV) rays was studied and a ballast water treatment system (BWTS) which can treat $50m^3$/h sea water was manufactured. The system consists of a disinfection chamber with six 3.5 kW UV lamps which are operated by magnetic ballasts, a programmable logic controller (PLC) and set of pipe lines. The biological disinfection efficacy of the prototype BWTS was evaluated following the IMO rules using zooplankton such as Artemia and Rotifer species for the size over $50{\mu}m$, and phytoplankton such as Tetraselmis and Thalassiosira species for the size between 10 to $50{\mu}m$. From the experimental results, the disinfection efficacy was 99.99 % that meets the IMO requirement. However, more studies on an energy saving system are needed because the consumption power of the prototype system is as high as over 21 kWh for $50m^3$/h.

녹두 발아 조해물질(阻害物質)의 이화학적(理化學的) 성질(性質) (Physico-chemical Characteristics of the Inhibitory Substance on the Germination of Mung Bean)

  • 김광현
    • 한국식품영양과학회지
    • /
    • 제14권1호
    • /
    • pp.57-60
    • /
    • 1985
  • 녹두 종자 발아억제물질을 생산하는 균을 동정한 결과 Streptomyces luteogriseus로 판정 되었으며, 본 저해물질의 순도검정을 위해 silica gel thin layer chromatography를 행한 결과 BuOH-HOAc-formic acid-water(15 : 12 : 3 : 10)와 BuOH-HOAc-water(4 : 1 : 5)의 용매게에서 각 Rf 치는 0.85와 0.92 의 단일 spot가 확인되었다. 또한 본 저해물질의 주요 radical을 조사해 본 결과 phenol기, pyrimidine 기, amono 기, 환원당 및 auxin은 함유되지 않았으며 단지 UV조사에 의해 형광을 나타내었다. 본 저해물질의 UV spectrum은 ${\gamma}^{H20}_{max}=252$ 였으며, IR spectrum 에서는 $3300{\sim}3500,\;2900{\sim}3000,\;1600{\sim}1700$$1400cm^{(-1)}$의 peak가 인정되었다.

  • PDF

W/O 마이크로에멀젼 졸-겔 법을 이용한 수용성 UV 흡수제를 함유한 실리카 마이크로캡슐의 제조 (Preparation of Silica Microcapsules containing Water-Soluble UV Absorbers by a W/O Microemulsion Sol-Gel Process)

  • 함경국;안복엽;석상일
    • 한국재료학회:학술대회논문집
    • /
    • 한국재료학회 2003년도 춘계학술발표강연 및 논문개요집
    • /
    • pp.220-220
    • /
    • 2003
  • The microencapsulation of droplets or particles within a solid shell leads to the formation of core-shell particles. Microencapsulation provides protection and controlled release of core materials such as drugs, vitamins, enzymes, perfumes, and the like. Such particles have, therefore, found a diverse range of applications in the pharmaceutical, agricultural, cosmetic, and food industries. UV absorbers are widely used for cosmetics to screen out ultra violet (UV) rays which have side effects on human skin. The absorbers are made generally from synthetic organic compounds, which can stimulate the human skins to develop allergic phenomena.

  • PDF

자외선 영상 이미지 비교를 통한 22.9kV 특고압 설비의 상태진단 연구 (The Study of Cable Fault Case and the Fault Management System of Electrical Facilities for private use)

  • 김영석;송길목
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 2009년도 추계학술대회 논문집
    • /
    • pp.211-213
    • /
    • 2009
  • This paper was studied about the ultra-violet rays(UV) image area and discharge quantity of 22.9kV class polymer insulator using UV camera. The UV image area was begun to observe to 60kV that is about 40% of breakdown voltage of polymer insulator and the area was increased by applied voltage. Also, the discharge quantity was increased at 60kV sharply. If the intensity of breakdown passes over about 40% we can know that need the check on the electrical facility.

  • PDF

IR 및 UV센서를 이용한 레이저 용접시의 실시간 모니터링 DSP 시스템 (A DSP System for On-line Monitoring in Laser Welding Using a IR and UV Sensors)

  • 윤충섭
    • Journal of Welding and Joining
    • /
    • 제23권4호
    • /
    • pp.53-58
    • /
    • 2005
  • We designed a weld monitoring system with UV and IR sensors using a embedded DSP controller for implementing a distribution system; running stand alone and communication with outside by industrial standard protocols. Also this system provided a USB port in order to be acquiring data in PC. The user interface program in PC visualized the IR and W data in time, frequency and state space. A correlation of IR and UV signals showed closely related to weld quality. A rapid change of geometry can be found through a moving average filter. And the average value of IR signal at an interval represented a welding width and depth. Through these results, we proposed a monitoring algorithm for a integer type DSP.

오염물질에 따른 변압기부싱 모델의 기중 코로나 방전 특성 (Corona Discharge Characteristics of Transformer Bushing Model with Contaminnations in Air)

  • 방만식;김우진;김영석;김상현
    • 조명전기설비학회논문지
    • /
    • 제26권5호
    • /
    • pp.91-96
    • /
    • 2012
  • The surface of bushing is contaminated with rain, dust, salt and others. A bushing with contaminations in air is serious problem in insulation. Therefore, it is important to understand the inspection and diagnoses of the safety. The ultra-violet rays(UV) camera has attracted interest from the view point of easy judgement. In this paper, we will report on the corona discharge characteristics of surface flashover model with contaminations in air. Also, UV images of discharge and corona pulse count in air are analyzed using prototype UV camera of Korea and a UV sensor with an optic lens. These results are studied at both AC and DC voltage under a non-uniform field.

픽서 접합 로봇 시스템의 개발 (Development of a fixer attaching robot system)

  • 박상신;성영휘;김동현
    • 전기학회논문지
    • /
    • 제59권11호
    • /
    • pp.2093-2102
    • /
    • 2010
  • In this paper, we introduce a fixer attaching robot system which is used to attach several fixers to a TV cabinet. It is necessary to automate the fixer attaching process for two reasons. One is that the process is very harmful because very strong ultraviolet rays are used in that process. The other is that the productivity and the overall quality of the end-product are determined by the fixer attaching process. We proposed 9 candidates for the robot system to be used in the fixer attaching process. Then we simulated cycle time for each of the 9 candidates with considering physical constraints. We also considered other aspects such as the easiness of implementation, possible interference with other mechanical structure, and cost etc. to choose one of the 9 candidates. We implemented the chosen robot system and adopted it in a TV manufacturing process.

자외선 카메라 개발을 위한 직류 연면방전 특성 (Characteristics of DC Surface Discharge for the Development of UV Camera)

  • 방만식;최재형;김우진;김영석;김상현
    • 조명전기설비학회논문지
    • /
    • 제25권5호
    • /
    • pp.98-103
    • /
    • 2011
  • Recently, UV(ultra-violet rays) camera has attracted a great deal of interest from the view point of easy judgement in inspections and diagnoses of the safety of power equipment. Especilly, UV camera is applied the inspection of UV with corona discharge. One of the most important and difficult problems is the basic research of filter design, materials and corona discharge. In this paper, we will report on the UV generation, corona pulse count and the polarity effect of positive and negative DC surface discharge in air. Also, corona discharge characteristics are analyzed using prototype UV camera of Korea. UV generation and corona pulse count due to surface discharge in positive needle is higher than that of negative needle.

Evaluation of the Functional Cosmetics

  • Yun, Mi-Ok
    • 한국응용약물학회:학술대회논문집
    • /
    • 한국응용약물학회 2007년도 Proceedings of The Convention
    • /
    • pp.117-126
    • /
    • 2007
  • Cosmetics have mild activity on the human body, and intended to be used for cleaning, beautifying the human body, and also keeping healthy skin or hair, promoting attractiveness or altering the appearance. Functional cosmetics, in other words cosmeceuticals, are restricted for following functions: 1) Whiten the skin tone by preventing deposition of melanin pigmentation or lightening of the color of melanin of skin, 2) alleviate or improve wrinkles of the skin, and 3) protect the skin from the ultra violet rays from the sun. According to the functions of the functional cosmetics, skin whitening products, anti-wrinkle products, and suntan & sunscreen products are manufactured. In order to manufacture and import the functional cosmetics in Korea, the approval process in KFDA is necessary. The review process in KFDA is performed based on The Korea Food and Drug Administration Notification 2007-44, "The Regulation of Reviewing the Functional Cosmetics" (June 29, 2007). Only after the approval of KFDA, functional cosmetics are allowed to advertise to the consumers for their functionality.

  • PDF