• 산업기술연구
• /
• 제31권A호
• /
• pp.109-112
• /
• 2011

In this paper, we proposed a planar reversed triangle monopole antenna for UWB(Ultra Wideband) communication. RF-60A substrate of 0.64 mm thickness and 6.15 relative permitivity and 0.035 mm conductor of thickness and loss tangent 0.0025 is used for implementation. We have used Ansoft $HFSS^{TM}$(High Frequency Structure Simulator) to simulate the proposed antenna. The proposed antenna showed return losses about -10 dB, nearly omni-directional radiation patterns and maximum gains are over -5 dBi at the frequency band from 3.1 GHz to 10.6 GHz for ultra wide band communication.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 춘계학술강연 및 발표대회강연 및 발표논문 초록집
• /
• pp.43-43
• /
• 2006

• International Journal of Computer Science & Network Security
• /
• 제24권4호
• /
• pp.206-210
• /
• 2024

Industrial facilities that use modern IT technologies require the ensured reliability and security of information in automated enterprise management. Concurrently, so as to ensure a high quality of communication, it is necessary to expand the bandwidth of communication channels, which are limited by the physical parameters of the radio frequency spectrum. In order to overcome this contradiction, we propose the application of technology fundamental to ultra-wideband signals, in which the ratio between the bandwidth and its central part is greater than "one". For this reason, the information signal is emitted without a carrier frequency - simultaneously within the entire frequency band - provided that the signal level is lower than the noise level. For the transmission of information content, the method of positional-time coding is used, in which each information bit is encoded by hundreds of ultrashort pulses that arrive within a certain sequence. Mathematical models of signals and values observed in wireless communication systems with autocorrelation reception of modulated ultra-wideband signals are furthermore recommended. These assist in identifying features of the dependence of the error probability on the normalized signal-to-noise ratio and the signal base. Comparative analysis has shown that the best noise immunity of the systems considered in this paper is the communication system, which uses the time separation of the reference and information signals. During the first half of the bit interval, the switch closes the output of the transmitter directly to the generator of the ultra-wideband signal - forming a reference signal. In the middle of the bit interval, the switch alternates the output to one of two possible positions depending on the encoding signal - "zero" or "one", forming the information part of the ultra-wideband signal. It should also be noted that systems with autocorrelation reception and separate transmission of reference and information signals, provide a high level of structural signal secrecy. Furthermore, they provide the reliable transmission of digital information, especially in interference conditions.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권2호
• /
• pp.202-207
• /
• 2015

A CMOS relaxation oscillator, with high robustness over process, voltage and temperature (PVT) variations, is designed in $0.18{\mu}m$ CMOS. The proposed oscillator, consisting of full-differential charge-discharge timing circuit and switched-capacitor based voltage-to-current conversion, could be expanded to a simple open-loop frequency synthesizer (FS) with output frequency digitally tuned. Experimental results show that the proposed oscillator conducts subcarrier generation for frequency-modulated ultra-wideband (FM-UWB) transmitters with triangular amplitude distortion less than 1%, and achieves frequency deviation less than 8% under PVT and phase noise of -112 dBc/Hz at 1 MHz offset frequency. Under oscillation frequency of 10.5 MHz, the presented design has the relative FS error less than 2% for subcarrier generation and the power dissipation of 0.6 mW from a 1.8 V supply.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2003년도 international symposium on advanced powder metallurgy
• /
• pp.39-40
• /
• 2003

1) Using a developed high-frequency induction heated sintering method, the rapid densification of WC-Co hard materials was accomplished using ultra fine powders with 260 nm size within 1 minute. 2) The relative density of the composite was 99.5% for the applide pressure of 60MPa and the induced current for 90% output of total capacity. 3) The grain size of WC-Co hard materials is about 260nm and the average thickness of the binder phase determined is about 11nm. The fracture toughness and the hardness of this work 12 $MPa{\cdot}nm^2$, respectively. 4) Using pressureless sintering, we produced dense WC-Co hard materials with a relative density of 97% without applying pressure.

• 전기학회논문지P
• /
• 제57권1호
• /
• pp.56-59
• /
• 2008

We have designed 4 types(void in insulation paper, protrusion electrode, floating electrode, surface discharge) of partial discharge(PD) defect to simulate typical faults found in oil filled power transformers. Ultra-high frequency(UHF) radiation due to PD was measured using a UHF measuring system and a conventional PD measuring system, simultaneously. Electromagnetic radiation spectra of these defects show UHF radiation up to about 1.5-2 GHz range. The phase resolved partial discharge(PRPD) patterns of UHF radiation from the PD defects were also measured and the pattern reveals distinct feature for each defect types. The UHF measuring could be used to detect PDs in oil filled transformers and analysis of the PRPD pattern should provide useful information on origin of PD signal.

• 전자공학회논문지
• /
• 제50권11호
• /
• pp.36-40
• /
• 2013

본 논문에서는 덤벨형 결함 접지면 구조를 갖는 복합 좌-우향(CRLH) 전송선로를 이용하여 초광대역 대역통과 여파기를 설계하였다. 결함 접지면 구조와 마이크로스트립 인터디지털 캐패시터를 이용하여 CRLH 전송선로를 구현하고 이것을 이용하여 필터를 설계하였다. CRLH 전송선로는 저역통과와 고역통과 필터의 복합적인 특성을 나타내는데, 그것들의 차단주파수를 잘 조절함으로써 초광대역의 대역통과 필터의 특성을 얻을 수 있다. UWB 필터 특성을 얻기 위해 1, 2, 4, 8 셀을 갖는 CRLH 전송선로에 대해 시물레이션하였고, 본 논문에서는 결과를 검증하기 위해 4 셀 구조의 UWB 필터를 설계 제작하였다. 측정된 결과는 시뮬레이션 결과와 일치하며 5GHz 중심주파수에서 88%의 넓은 대역폭을 갖는다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.113-116
• /
• 2004

We developed internal and external type sensor to measure ultra-high frequency (UHF) partial discharge (PD) in 170 kV gas-insulated switchgears (GIS). We also manufactured a PD-generator to verify and measure the detection sensitivity of those sensors. We measured the output power of the UHF PD sensors induced by PDs of 5 pC using the PD-generator. We measured UHF propagation loss of an 170 kV GIS for optimal arrangement of the sensors. We used swept UHF signal from a network analyzer into the GIS to measure the loss of various components of the GIS.

• 대한전자공학회논문지TC
• /
• 제43권7호
• /
• pp.132-142
• /
• 2006

본 논문에서는 단거리 개인 네트워킹을 위한 고속 전송률 UWB 시공간 부호화 OFDM 시스템을 제시한다. 본 시스템은 UWB 펄스를 토대로 하는 혼성 OFDM 신호와 함께 복소 시공간 부호화 선호를 송신한다. 송신 신호는 적절히 설계된 주파수 집합으로부터 선별된 주파수에 의해 변조된 희소 펄스열이다. 부수적으로 WL(widely linear) 수신 여파기와 시간 주파수 공간 전송은 단순한 병렬 선형 검파기를 이용하여 설계한다. 또한, 전파 시스템에서 깊은 페이딩을 극복하기 위해 시공간 블록 부호와 결합한 빔성형을 간략히 고찰한다.

• 한국정보통신학회논문지
• /
• 제17권10호
• /
• pp.2233-2238
• /
• 2013

본 논문에서는 복합 좌/우향 (CRLH) 전송 선로를 이용하여 초광대역 필터의 새로운 설계 방법에 대해 나타내었다. CRLH 전송선로의 특성을 구현하기 위해 접지면에는 결함 접지면 구조(DGS)와 윗면에는 마이크로스트립 인터디지털 결합기를 이용하였다. 본 논문에서 제안하는 CRLH 전송선로는 저역통과 필터와 고역통과 필터의 특성을 결합한 특성을 나타내며 삽입손실이 적고 광대역 필터 특성을 얻을 수 있는 장점이 있다. 몇 개의 셀 구조에 대해 연구하였으며, 본 논문에서는 3-셀 구조의 UWB 필터를 설계하고 구현하였다. 실험결과와 시뮬레이션 결과가 일치하며 중심주파수 5 GHz에서 105 %의 대역폭을 나타내며 삽입손실은 중심주파수에서 0.7 dB를 나타내었다.