• Korean Chemical Engineering Research
• /
• v.52 no.1
• /
• pp.98-105
• /
• 2014

Lysozyme amounts to 0.3% in egg white and functions as an agent of cell lysis and activator of tissue reconstruction. Ion exchange chromatography is the most useful method of separation among affinity chromatography, ion exchange chromatography, and ultra-filtration. The aim of present study is to find the optimum pH and temperature for the separation of lysozyme in egg white within cation exchange gel filled glass column. And we compared results of experiments with those of simulations. Phosphate buffer was used, and pH and temperature were varied as 5~7 and $25{\sim}40^{\circ}C$ respectively. RP-HPLC was the tool for the retention time identification and quantitative analysis of lysozyme. OriginPro 8 measured the peak area of lysozyme chromatogram and quantified the eluted lysozyme. Largest amount of lysozyme was separated under the conditions of pH 5 and T $25^{\circ}C$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.1A
• /
• pp.122-131
• /
• 2000

In this paper, we propose a cell scheduling algorithm for input queueing ATM switch. The input queueing architecture is attractive for building an ultra-high speed ATM (Asynchronous Transfer Mode) switch. We proposea WMUCS (Weighted Matrix Unit Cell Scheduler) based on the MUCS which resolves HOL blocking and outputport contention. The MUCS algorithm selects an optimal set of entries as winning cells from traffic matrix (weightmatrix). Our WMUCS differs from the MUCS in generating weight matrices. This change solves the starvationproblem and it reduces the cell loss variance. The performance of the proposed algorithm is evaluated by thesimulation program written in C++. The simulation results show that the maximum throughput, the average celldelay, and the cell loss rate are significantly improved. We can see that the performance of WMUCS is excellentand the cost-effective implementation of the ATM switch using proposed cell scheduling algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.12A
• /
• pp.1311-1319
• /
• 2007

This paper presents the VHDL implementation procedure of the passive RFID tag operating in Ultra High Frequency. The operation of the tag compatible with the EPCglobal Class1 Generation2(GEN2) protocol is verified by timing simulation after synthesis and implementation. Due to the reading range with relatively large distance, a passive tag needs digital processor which facilitates faster decoding, encoding and state transition for enhancement of an interrogation rate. In order to satisfy linking time, the pipe-line structure is used, which can minimize latency to serial input data stream. We also propose the sampling strategy to decode the Preamble, the Frame-sync and PIE symbols in reader commands. The simulation results with the fastest data rate and multi tags environment scenario show that the VHDL implemented tag performs faster operation than GEN2 proposed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.4
• /
• pp.489-499
• /
• 2011

RFID technologies, which allow collecting, storing, processing, and tracking information by wirelessly recognizing the inherent ID of object through an attached electronic tag, have a variety of application areas. This paper presents a novel carrier leakage suppression RF(CLS-RF) front-end for ultra-high-frequency RF identification reader. The proposed reader CLS-RF front-end structure generates the carrier leakage replica through the nonlinear path that contains limiter. The limiting function only preserves the frequency and phase information of the leakage signal and rejects the amplitude modulated tag signal in the envelope. The carrier leakage replica is then injected into the linear path that contains phase shifter. Therefore, the carrier leakage signal is effectively cancelled out, while not affecting the gain of the desired tag backscattering signal. We experimentally confirm that the prototype shows a significant improvement in the leakage to signal ratio by up to 36 dB in 910 MHz, which is consistent with our simulation results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.1
• /
• pp.77-87
• /
• 2017

Even though current LTE/LTE-A mobile networks provide enough high data rate and low latency to support conventional wireless services, to support ultra-low delay services, such as virtual reality and remote control, in the next generation mobile communication network, it is required to provide very low delay about several ms. However, in the uplink transmission of the LTE/LTE-A system, the process of scheduling grant is required to obtain uplink resources for uplink transmission from the eNB. The process of granting uplink resources from eNB brings additional fixed latency, which is one of the critical obstacles to achieve low delay in uplink transmissions. Thus, in this paper, we propose a novel uplink transmission scheme called Cut-in uplink transmission, to reduce uplink latency. We provide the performance of the proposed uplink transmission scheme through simulations and show the proposed uplink transmission scheme provides lower uplink transmission delay than conventional uplink transmission scheme in LTE/LTE-A mobile networks.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.8
• /
• pp.643-650
• /
• 2000

Density-of-states effective mass(m*$_{d}$) and conductivity mass(m*$_{c}$)for Ge and Ge$_{0.8}$/Sn$_{0.2}$ are obtained by using 8$\times$8 k.p and strain Hamiltonians. It is shown that m*$_{d}$ and m*$_{c}$ for electrons in Ge/Ge$_{0.8}$/Sn$_{0.2}$(001) and Ge$_{0.8}$/Sn$_{0.2}$/Ge(001) are much smaller than those for electrons in relaxed Ge mainly due to the increase of interaction caused by the strain between the conduction band and valence bands at the $\Gamma$ point. The lift of degeneracy in Ge/Ge$_{0.8}$/Sn$_{0.2}$(001) and Ge/Ge$_{0.8}$/Sn$_{0.2}$(001) makes m*$_{d}$ and m*$_{c}$ for holes smaller than those in relaxed Ge and results in the decrease of the interband scattering as well as interband scattering. The decrease of the interband scattering is more obvious in Ge/Ge$_{0.8}$/Sn$_{0.2}$(001) because of its large splitting energy between the heavy hole and light hole band. Therefore, Ge/Ge$_{0.8}$/Sn$_{0.2}$(001) is expected to be good candidate for the development of ultra high-speed CMOS device.CMOS device.eed CMOS device.CMOS device.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.1
• /
• pp.28-33
• /
• 2015

The needle electrode is inserted into the cross-linked polyethylene(XLPE) which is the ultra high voltage cable for electric power. By changing the tilt of the needle electrode, we investigated how the void and the thickness of the insulating layer influence the partial discharge(PD) characteristics and the insulating breakdown. In order to investigate the PD characteristics, The XLPE cable was used to the specimens and the tungsten electrode was used with the needle electrode. And the inner semi-conductive layer material of XLPE cable was used with the negative electrode by bonding with the use of conduction tape. The size of the specimens was manufactured to be $16{\times}40{\times}30[mm^3]$. We confirmed the effect on changing the PD characteristics according to the changing voltage and the tilt of the electrode after applying the voltage on the electrode from 1[kV] to 40[kV] at room temperature. In the PD characteristics, it was confirmed that the PD current of air void specimens with tilt was unstable more than that of no void specimens with tilt. It was also confirmed that the breakdown voltage was decreased because the effect of air void is more active than the change of the needle electrode tilt in the specimen with air void inside the insulation.

• Journal of the Korean Solar Energy Society
• /
• v.32 no.4
• /
• pp.9-16
• /
• 2012

Nanofluids using Carbon Nanotubes have a excellent thermal characteristic. In this study, for increasing the efficiency of solar collector, the thermal conductivity and viscosity of Ethanol-Oxidized Multi-walled Carbon Nanofluids were measured. Nanofluids were manufactured by ultra-sonic dispersing Oxidized Multi-walled Carbon Nanotubes(OMWCNTs) in ethanol at the rates of 0.0005 ~ 0.1 vol%. The thermal conductivity and viscosity of manufactured nanofluids were measured at the low temperature($10^{\circ}C$), the room temperature($25^{\circ}C$) and the high temperature($70^{\circ}C$). For measuring thermal conductivity and viscosity, we used transient hot-wire method and rotational digital viscometer, respectively. As a result, under given temperature conditions, thermal conductivity of the 0.1 vol% nanofluids improved 33.74% ($10^{\circ}C$), 33.14% ($25^{\circ}C$) and 32.36% ($70^{\circ}C$), and its viscosity increased by 37.93% ($10^{\circ}C$), 31.92% ($25^{\circ}C$) and 29.42% ($70^{\circ}C$) than the base fluids.

• Journal of Ginseng Research
• /
• v.40 no.4
• /
• pp.382-394
• /
• 2016

Background: Ginsenosides are the characteristic and principal components which manifest a variety of the biological and pharmacological activities of the roots and rhizomes of Panax ginseng (GRR). This study was carried out to qualitatively and quantitatively determine the ginsenosides in the cultivated and forest GRR. Methods: A rapid and sensitive ultra-high-performance liquid chromatography coupled with diode-array detector and quadrupole/time of flight tandem mass spectrometry (UPLC-DAD-QTOF-MS/MS) was applied to the qualitative analysis of ginsenosides and a 4000 QTRAP triple quadrupole tandem mass spectrometer (HPLC-ESI-MS) was applied to quantitative analysis of 19 ginsenosides. Results: In the qualitative analysis, all ingredients were separated in 10 min. A total of 131 ginsenosides were detected in cultivated and forest GRR. The method for the quantitative determination was validated for linearity, precision, and limits of detection and quantification. 19 representative ginsenosides were quantitated. The total content of all 19 ginsenosides in the forest GRR were much higher than those in the cultivated GRR, and were increased with the growing ages. Conclusion: This newly developed analysis method could be applied to the quality assessment of GRR as well as the distinction between cultivated and forest GRR.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.340-340
• /
• 2011

플라즈마 공정에서의 생산률이 플라즈마의 밀도에 비례한다는 많은 연구가 이루어진 후, 초대면적 고밀도 플라즈마 소스의 개발은 플라즈마 소스 개발에서 중요한 부분을 차지하기 시작하였다. 이로 인해, 전자 공명 플라즈마, 유도 결합 플라즈마와 헬리콘 플라즈마 등 새로운 고밀도 플라즈마 개발 연구가 활발히 진행되고 있다. 최근에는 고밀도 플라즈마 개발과 더불어, 대면적 플라즈마 소스의 개발이 플라즈마 공정 기술의 중요한 이슈가 되고 있는데, 이는 450 mm 이상의 반도체, 2 m${\times}$2 m 이상의 8세대 평판 디스플레이와 1 m${\times}$1 m 태양광 전지 생산 공정에서 플라즈마의 기술이 요구되고 있기 때문이다. 대면적 공정영역의 이러한 경향은 균일한 대면적 고밀도 플라즈마 개발을 촉진시켜왔다. 밀도가 낮은 축전 결합 플라즈마를 제외한, 대면적 공정에 적합한 고밀도 플라즈마원으로 유도 결합 플라즈마와 헬리콘 플라즈마를 선택한 후, 병렬연결 시의 특성을 알기 위하여 ICP와 헬리콘의 단일 튜브와 다수 튜브의 플라즈마 내부, 외부 변수를 측정하여 조사하였다. 두 가지 플라즈마 소스의 비교 실험을 위하여, 자기장을 제외한 모든 조건을 동등하게 한 후 실험을 하였다. 단일 헬리콘 실험을 바탕으로, 대면적 실험에 가장 적합한 자기장의 세기, 자석의 위치 및 튜브의 치수를 정한 후, fractal 구조를 위한 16개 다수 방전을 ICP와 헬리콘을 비교하였다. 병렬연결 시, RF 플라즈마에서는 같은 전압을 가져도, 안테나 디자인을 고려하지 않으면 모든 튜브의 방전이 이루어 지지 않았다. 이를 컴퓨터 모의 전사를 통해 확인하고, 가장 최적화된 안테나를 설계하여 실험을 하였다. ICP에서는 모든 튜브가 방전에 성공한 반면, 헬리콘 플라즈마는 ICP에 10배에 달하는 높은 밀도를 냈으나, 오직 4개 튜브만이 켜지고 안정적으로 방전이 이루어 지지 않았다. ICP의 경우, RF 전송선의 디자인을 통해 파워의 균등 분배가 가능하지만, 헬리콘의 경우 자기장을 추가해서 고려해야 되는 것을 확인하였다. 모든 튜브에 비슷한 자기장을 형성하기 위해서는 자석의 크기가 커지는 문제점이 있으나, 매우 낮은 압력에서 방전이 가능하고, 같은 압력에서 ICP에 비해 10배 이상 달하는 장점이 있다. 실험 결과를 바탕으로, ICP와 헬리콘 플라즈마의 다수 방전에 대한 분류를 하였고, 바로 현장에 투입이 가능한 소스로 판단된다.