• Journal of Navigation and Port Research
• /
• v.32 no.6
• /
• pp.505-513
• /
• 2008

Regarding the developmental plans for the coastal areas and marine architectures, this study deal with the overall planning of apartment complexes in waterfront areas, focusing upon the analysis of their comfort and convenience factors from the perspective of the potential residence. It also analysis the intra-complex comfort and satisfaction conditions in terms of their floor-by-floor, directional. and location factors. The results of the study are as follows: 1) The order of respondents' preference on directional factor has been found to be: South > Southeast > Southwest > East > others. 2) 67% of the people surveyed on scenery responded that outward view is considered more significant than the directional factor. 3) A comprehensive analysis of floor zone-specific view preference shared that there were only minor differences among quay wall, arc, and river-seashore types. The impact of the characteristics of the marine environments turned out to be a greater point of consideration; showing that the other of floor-preference is: high-level > ultra-high level > middle level > low level.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.11
• /
• pp.2021-2026
• /
• 2007

In the parer, we design a non-coherent UWB system by adopting the architecture of a simplified asynchronous transmission and the edge-triggered pulse transmission, which makes e system performance independent of the share of the transmitted waveform, robust to multipath channels. The designed non-coherent UWB transceiver architecture has an advantage of the simple realization since any mixer, high-speed correlator, and high-sampling A/D converter are not necessary at the cost of performance degradation of about 3dB. Further, the designed non-coherent UWB transceiver is actually implemented with the wireless CANVAS prototype testbed in short range indoor application environments such as a lecture room. The implemented prototype testbed is proven to offer the data rate of 115kbps on the conditions of Peer-to-Peer(P-to-P) in the indoor channel within the range of about 10m.

• Journal of Broadcast Engineering
• /
• v.24 no.5
• /
• pp.813-826
• /
• 2019

This paper is a study on the implementation of MAM(Media Asset Management) to utilize UHD contents as high quality broadcast material. The implementation method of this paper is to separate MAM roles with content management functions and transmission workflow functions from workflow, metadata and system interface related work, which are divided into core MAM and MAM-Ex structure. Through the method proposed in this paper, we improved the content management method by applying the page menu method to the material metadata modification and applying the template method to the material structure API. In addition, the storage of UHD material and the configuration of the component server are pooled without any distinction of channels, thereby enhancing the security of UHD transmission assets by minimizing the movement of contents together with broadcasting material protection.

• Industry Promotion Research
• /
• v.6 no.4
• /
• pp.1-9
• /
• 2021

The purpose of this study is to manufacture lightweight aggregates for recycling water treatment sludge, to identify the physical properties of the aggregates, and present a method of utilizing the manufactured lightweight aggregates. The chemical composition and thermal properties were examined via a raw materials analysis. The aggregate examined here was fired by the rapid sintering method and the single-particle density and water absorption rate were measured. Water treatment sludge has high ignition loss and high fire resistance. When 30wt% of purified sludge was added, the single-particle density of the aggregates was in the range of 0.8~1.2g/cm³ at a temperature of 1,150~1,200℃. At temperatures of 1200℃ or higher, ultra-light aggregates having a single-particle density of 0.8 or less could be produced. When applied to concrete by replacing the general aggregate in the concrete, a specimen having strength values of 200 to 450 kgf/cm² on 28 days was obtained, and when applied as a filter material, the performance was equal to or higher than that of ordinary sand.

• Journal of Applied Biological Chemistry
• /
• v.62 no.2
• /
• pp.129-135
• /
• 2019

Salvia miltiorrhiza Radix is cultivated in Korea and China and is traditionally used to treat cardiovascular diseases. In this study, we developed and validated a quantitative analysis method for S. miltiorrhiza Radix using high-performance liquid chromatography (HPLC). Identification was performed using ultra performance liquid chromatography-tandem mass spectrometry. For quantitative analysis, we used seven marker compounds. Separation conditions for HPLC were optimized using an ODS column with gradient conditions of 1% formic acid in distilled water and 1% formic acid in acetonitrile, with a flow rate of 0.8 mL/min and a detection wavelength of 280 nm. This method showed good linearity ($R^2=0.9998$), precision (relative standard deviation ${\leq}3.3%$), accuracy (recovery of 94.16-102.89%), limit of detection ($7.53{\mu}g/mL$), and limit of quantification ($23.71{\mu}g/mL$). This approach successfully quantified marker compounds in S. miltiorrhiza Radix. The individual marker compounds were identified by comparing the molecular masses and retention times with does standard compounds. Marker compound contents of S. miltiorrhiza Radix were investigated with different cultivation regions. Seven marker compounds were detected and quantified in all samples. Among them, salvianolic acid B showed the highest contents and it ranged from 4.13 to 7.15%. The salvianolic acid B content (7.15%) of marker compound was the highest in Bonghwa, and the tanshinone IIA content (1.90%) was the highest in Pohang. The results of marker compounds and developed method were intended to provide a favorable reference for the study of S. miltiorrhiza Radix from different regions of Korea.

• Steel and Composite Structures
• /
• v.31 no.1
• /
• pp.13-25
• /
• 2019

Reactive powder concrete (RPC) is a type of ultra-high strength concrete that has a relatively high brittleness. However, its ductility can be improved by confinement, and the use of RPC in composite RPC filled steel tube columns has become an important subject of research in recent years. This paper aims to present an experimental study of axial capacity calculation of RPC filled circular steel tube columns. Twenty short columns under axial compression were tested and information on their failure patterns, deformation performance, confinement mechanism and load capacity were presented. The effects of load conditions, diameter-thickness ratio and compressive strength of RPC on the axial behavior were further discussed. The experimental results show that: (1) specimens display drum-shaped failure or shear failure respectively with different confinement coefficients, and the load capacity of most specimens increases after the peak load; (2) the steel tube only provides lateral confinement in the elastic-plastic stage for fully loaded specimens, while the confinement effect from steel tube initials at the set of loading for partially loaded specimens; (3) confinement increases the load capacity of specimens by 3% to 38%, and this increase is more pronounced as the confinement coefficient becomes larger; (4) the residual capacity-to-ultimate capacity ratio is larger than 0.75 for test specimens, thus identifying the composite columns have good ductility. The working mechanism and force model of the composite columns were analyzed, and based on the twin-shear unified strength theory, calculation methods of axial capacity for columns with two load conditions were established.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.6_2
• /
• pp.1015-1024
• /
• 2020

By nature, smart construction technology is a convergence technology, therefore aptly constructing and running an information system is needed in order to effectively develop and maintain it. Thus, in this study, an information system prototype was developed for the creation and linking of high precision digital maps at road construction sites for the effective performance of the development of the Information Collecting and Analyzing Techniques in the Construction Site (ICAT). For this, (1) defined input/output (I/O) data of each technical detail of ICAT, (2) analyzed the data flow, (3 ) proposed an information system prototype for high precision digital maps development and connection. Based on the information system prototype constructed in this study, it was inferred that each technique and its information for the Smart Construction Technique Development Business was in a consistent flow. Developed information system prototype would enable effective cooperation between subjects directly involved in the technique development, by defining I/O data in advance. Moreover, it would be of value to practitioners for refining the output data from each technique, thereby linking databases and forming Entity Relationship Diagram.

• KEPCO Journal on Electric Power and Energy
• /
• v.8 no.2
• /
• pp.103-110
• /
• 2022

Ultrafine Particle number and size distributions were simultaneously measured at rural area around the power plant in Dangjin, South Korea. New Particle formation and growth events were frequently observed during January, 2021 and classified based on their strength and persistence as well as the variation in geometric mean diameter(GMD) on January 12, 21 and 17. In this study, we investigated mechanisms of new particle growth based on measurements using a high resolution time of flight aerosol mass spectrometer(HR-ToF-AMS) and a scanning mobility particle sizer(SMPS). On Event days(Jan 12 and 21), the total average growth rate was found to be 8.46 nm/h~24.76 nm/hr. These growth rate are comparable to those reported for other urban and rural sites in South Korea using different method. Comparing to the Non-Event day(Jan 17), New Particle Growth mostly occurred when solar radiation is peaked and relative humidity is low in daytime, moreover enhanced under the condition of higher precusors, NO₂ (39.9 vs 6.2ppb), VOCs(129.5 vs 84.6ppb), NH₃(11 vs 4.7ppb). The HR-ToF-AMS PM_1.0 composition shows Organic and Ammoniated nitrate were dominant species effected by emission source in domestic. On the other hand, The Fraction of Ammoniated sulfate was calculated to be approximately 16% and 31% when air quality is inflow from China. Longer term studies are needed to help resolve the relative contributions of each precusor species on new particle growth characteristics.

• Clean Technology
• /
• v.15 no.2
• /
• pp.69-74
• /
• 2009

A high-dose ion-implanted photoresist (HDIPR) was stripped off from the surface of a semiconductor wafer by using a mixture of supercritical carbon dioxide and a co-solvent. The additional ultrasonication improved the stripping efficiency remarkably and thus reduced the stripping time by supplying physical force to the substrate. We investigated the effect of co-solvents, co-solvent concentration, and stripping temperature and pressure on the stripping efficiency. The wafer surfaces before and after stripping were analyzed by scanning electron microscopy and by an energy dispersive X-ray spectrometer. The HDIPR could be stripped off completely in 3 min with 10%(w/w) acetone/sc$C0_2$ mixture at 27.6 MPa and 343 K.

• Journal of the Korean Vacuum Society
• /
• v.7 no.s1
• /
• pp.57-77
• /
• 1998

Heteroepitaxial $Y_2O_3$ films were grown on a Si(111) substrate by ionized cluster beam deposition(ICBD) in ultra high vacuum, and its qualities such as crystllitnity, film stress, and morphological characteristics were investigated using the various measurement methods. The crystallinity was investigated by x-ray diffraction (XRD) and reflection high energy electron diffraction (RHEED). Interface crystallinity was also examined by Rutherford backscattering spectroscopy(RBS) channeling, transmission electron microscopy(TEM). The stress of the films was measured by RBS channeling and XRD. Surface and interface morphological characteristics were investigated by atomic force microscopy (AFM) and x-ray scattering method. Comparing the interface with the surface characteristics, we can conclude that many defects at the interface region were generated by interface reaction between the yttrium metal and SiO2 layer and by ion beam characteristic such as shallow implantation, so that they influenced the film qualities. The film quality was dominantly depended on the characteristic temperature range. In the temperature range from $500^{\circ}C$ to $600^{\circ}C$, the crystallinity was mainly improved and the surface roughness was drastically decreased. On the other hand, in the temperature range from $600^{\circ}C$ to $700^{\circ}C$, the compressive stress and film density were dominantly increased, and the island size was more decreased. Also the surface morphological shape was transformed from elliptical shape to triangular. The film stress existed dominantly at the interface region due to the defects generation.