• ETRI Journal
• /
• v.29 no.5
• /
• pp.670-672
• /
• 2007

An ultra-wideband low-noise amplifier is proposed with operation up to 8.2 GHz. The amplifier is fabricated with a 0.18-${\mu}m$ CMOS process and adopts a two-stage cascode architecture and a simplified Chebyshev filter for high gain, wide band, input-impedance matching, and low noise. The gain of 19.2 dB and minimum noise figure of 3.3 dB are measured over 3.4 to 8.2 GHz while consuming 17.3 mW of power. The Proposed UWB LNA achieves a measured power-gain bandwidth product of 399.4 GHz.

• Journal of Korea Multimedia Society
• /
• v.17 no.5
• /
• pp.573-581
• /
• 2014

The salient features of UWB(Ultra WideBand) networks such as high-rate communications, low interference with other radio systems, and low power consumption bring many benefits to users, thus enabling several new applications such as wireless universal serial bus (WUSB) for connecting personal computers (PCs) to their peripherals and the consumer-electronics (CE) in people's living rooms. Because the size of multimedia data frame, WiMedia device must transmit the fragment of MSDU. However, when the fragment of MSDU is lost, WiMedia device maintains active mode for the time to complete the transmission MSDU, and there is a problem that unnecessary power consumption occurs. Therefore we propose new power management scheme to reduce unnecessary power consumption of WiMedia devices in the case that the fragment is lost.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.3 s.106
• /
• pp.287-294
• /
• 2006

In the paper, characterization and analysis of UWB(Ultra Wide Band) antennas in time domain are described. The impulse propagation channel including UWB antennas is proposed for the analysis in time domain. Using the proposed propagation channel, the technique of obtaining impulse response of UWB antenna is proposed. Also, ringing, peak value of the impulse response, and the width of the impulse response are introduced as parameters for characterizing a UWB antenna in time domain. A modified UWB conical monopole antenna, a UWB TEM horn antenna, and a UWB stepped fat monopole antenna were fabricated. From the measurement of reflection coefficients, three antennas had bandwidth more than 3 GHz. The impulse responses of the antennas were measured in an anechoic chamber. The results showed that the TEM horn with highest gain has the highest peak amplitude and the stepped fat monopole antenna with narrowest bandwidth for reflection coeffcient had the widest width of the impulse response. Also, ringing in the stepped fat monopole antennas and the UWB conical monopole antenna were observed.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.6
• /
• pp.282-289
• /
• 2014

In this paper, the UWB (Ultra Wide Band) band-pass filter (BPF) with compact-size using impedance mismatching in transmission line and SIR (Stepped Impedance Resonator) instead of open stubs is presented. The proposed BPF have 103 % of bandwidth and 11.2 GHz of center frequency, respectively. In additional, the operation frequencies of the suggested BPF are 4.8 GHz to 16 GHz. In this structure, the length of the transmission line is reduced to half compared with the original one by impedance mismatching technique with low frequency band (sub harmonics) and harmonic components. Also, the open stub can be used for SIR due to reduced size. Experimental results show that the insertion and return losses are 0.35 dB and 15.1 dB, respectively and the filter size is $8.92{\times}10.6mm^2$. The proposed BPF is in good agreement.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.6
• /
• pp.121-130
• /
• 2009

In this paper, Gaussian probability distribution model based multi-sensor data fusion algorithm is proposed for a vehicular location awareness system. Conventional vehicular location awareness systems are operated by GPS (Global Positioning System). However, the conventional system is not working in the indoor of building or urban area where the receiver is difficult to receive the signal from satellites. A method which is combined GPS and UWB (Ultra Wide-Band) has developed to improve this problem. However, vehicular is difficult to receive seamless location information since the measurement systems by both GPS and UWB convert the vehicle's movement information separately at each sensor. In this paper, normalized probability distribution model based Hybrid UWB/GPS is proposed by utilizing GPS location data and UWB sensor data. Therefore the proposed system provides information with seamless and location flexible properties. The proposed system tested by Ubisense and Asen GPS in the $12m{\times}8m$ outdoor environments. As a result, the proposed system has improved performance for accurateness and connection ability between devices to support various CNS (Car Navigation System).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.2
• /
• pp.265-274
• /
• 2011

In this paper, it is studied on wide radiating slot antenna's miniaturization for ultra wide-band(UWB) technologies and notch structure to prevent interference between UWB systems and existing wireless systems for using Wi-Fi service of IEEE standards 802.11 a/n. Proposed antenna that wide slot is decreased from $\lambda/2$ to $\lambda/4$ length of resonant frequency has decreased by 72 % compared with conventional antenna. And optimized T-shaped CPW-fed stub has satisfied UWB bandwidth for 3.0~11.8 GHz. Then, creating 2-order Hilbert curve slot line in the stub's patch area, 4.9~5.6 GHz that centered frequency is 5 GHz is eliminated. Finally, the designed antenna constructed on FR4-epoxy has $20{\times}15\;mm^2$ dimension. The measured results that are obtained return loss under -10 dB through 3.2~11.8 GHz without Wi-Fi bandwidth, a linear phase characteristic, a stable group delay, and omnidirectional radiation patterns are presented.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.1
• /
• pp.1-6
• /
• 2012

In this paper, the performance comparison of the TR-UWB System using Wavelet Pulse, DPSS pulse, and second Gaussian pulse in multi-user environment is analyzed. The data signal and the reference signal is sent with some time intervals in TR-UWB system. At this time the two signals are through the same channel. In the receiver the reference signal is used as a template. This advantage results in demodulation without channel estimation and low complexity of it. However the conventional TR-UWB system based on a Gaussian signal in a multi-user environment has the disadvantage of poor performance due to the interferences between the users. To overcome this disadvantage, DPSS (Discrete Prolate Shperoidal Sequence) is used to reduce the interferences between the users. We propose the system with multiresolution function of orthogonal wavelet reducing the interferences, which has a better performance in multi-user environment when they are sent in transmission side.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.7
• /
• pp.669-676
• /
• 2003

In this paper, a novel design method for an ultra-wide band TEM horn antenna is proposed on the basis of parallel plate waveguide theory. A principle of TEM modes generation is analyzed and the characteristics of this antenna are experimentally investigated. The proposed TEM horn antenna has an exponentially tapered structure to increase matching bandwidth. Also, the designed TEM horn has shortened length but increased aperture so that the bandwidth for cutoff frequency is increased. The measured result show that the proposed TEM hem antenna has the frequency band of 75 MHz to 1200 MHz for VSWR less than 2.0 and the bandwidth of the TEM horn becomes more than twice comparing to that of a linearly tapered TEM hem. It is anticipated that the manufactured antenna is applicable to UWB systems for impulse response measurement.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.39-44
• /
• 2005

A broadband DC to 40 GHz 5-bit MMIC digital attenuator has been developed. The ultra broadband attenuator has been achieved by newly inserted the transmission lines in conventional Switched-T attenuator and the optimization of the transmission line parameters. Momentum was employed in design for an accurate performance prediction at high frequencies and Monte Carlo analysis was applied to verify performance stability against the MMIC process variation. The attenuator has been fabricated with 0.15 $\mu$m GaAs pHEMT process. This attenuator has 1 dB resolution and 23 dB dynamic range. High attenuation accuracy has been achieved over all attenuation range and full 40 GHz bandwidth with the reference state insertion loss of less than 6 dB at 20 GHz. The input and output return losses of the attenuator are better than 14 dB over all attenuation states and frequencies.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1546-1547
• /
• 2006

오늘날 전자기파의 영향은, 제어장비의 내부에 있는 기판의 전자 부품에 전자기적인 충격을 주어 장비의 오동작이나 고장을 일으키는 등 심각한 문제들이 제기 되고 있다. 이러한 임펄스 전자기파는 제어 장치에 연결된 제어전선으로 타고 들어와서 전자장비 내부의 부품들과 반사,공진등을 일으켜서 결국에는 PCB(printed circuit board)에 손상을 입혀서 그 장치들을 사용 못하게 할 수가 있다. 주파수가 광대역인 50MHz 에서 800MHz 까지의 EMI(electro magnetic interference)환경을 만들 수 있는 장치를 제작 하였다. 이러한 UWB(ultra wide band)장치는 고전압펄스를 압축 성형하여, 동작시간이 아주 빠른 ultra fast 스위치를 통해서, 펄스의 기림 시간이 수백ps의 파형을 만들어, 안테나로 전송하여 공간으로 방사시키는 장치에 대해 설계 제작하여 실험한 결과에 대해 논하고자 한다.