• 한국지반공학회논문집
• /
• 제23권8호
• /
• pp.35-45
• /
• 2007

말뚝의 거동특성은 지반조건 뿐만 아니라 말뚝의 형상에 의해서도 영향을 받는 것으로 알려져 있다. 본 논문에서는 비배토 테이퍼말뚝과 원통형말뚝의 연직거동과 지지력 특성을 조사하기 위해서 선단지지력과 주면마찰력을 분리해서 측정할 수 있는 모형말뚝과 가압토조를 이용해서 총 12회의 모형말뚝시험을 실시하였다. 시험결과 원통형말뚝의 주면 하중은 말뚝 직경의 4%에 해당하는 침하량에서 극한치에 도달하였다. 반면 테이퍼말뚝의 주면하중은 말뚝이 침하함에 따라 계속 증가하는 경향을 보였으며, 원통형말뚝의 주면하중보다 상당히 큰 것으로 나타났다. 그리고 조밀한 지반에서는 테이퍼말뚝의 전체지지력이 원통형말뚝보다 작은 반면 상대밀도가 보통인 지반에서는 테이퍼말뚝의 전체 지지력이 원통형말뚝보다 큰 것으로 나타났다. 테이퍼말뚝의 단위 극한선단지지력은 지반의 토압계수가 0.4보다 클 때 원통형말뚝보다 컸으며, 테이퍼말뚝의 단위 극한주면마찰력은 지반의 토압계수와는 무관하게 원통형말뚝보다 큰 것을 알 수 있었다.

• Wind and Structures
• /
• 제28권2호
• /
• pp.71-87
• /
• 2019

The yaw and interference effects of blades affect aerodynamic performance of large wind turbine system significantly, thus influencing wind-induced response and stability performance of the tower-blade system. In this study, the 5MW wind turbine which was developed by Nanjing University of Aeronautics and Astronautics (NUAA) was chosen as the research object. Large eddy simulation on flow field and aerodynamics of its wind turbine system with different yaw angles($0^{\circ}$, $5^{\circ}$, $10^{\circ}$, $20^{\circ}$, $30^{\circ}$ and $45^{\circ}$) under the most unfavorable blade position was carried out. Results were compared with codes and measurement results at home and abroad, which verified validity of large eddy simulation. On this basis, effects of yaw angle on average wind pressure, fluctuating wind pressure, lift coefficient, resistance coefficient,streaming and wake characteristics on different interference zone of tower of wind turbine were analyzed. Next, the blade-cabin-tower-foundation integrated coupling model of the large wind turbine was constructed based on finite element method. Dynamic characteristics, wind-induced response and stability performance of the wind turbine structural system under different yaw angle were analyzed systematically. Research results demonstrate that with the increase of yaw angle, the maximum negative pressure and extreme negative pressure of the significant interference zone of the tower present a V-shaped variation trend, whereas the layer resistance coefficient increases gradually. By contrast, the maximum negative pressure, extreme negative pressure and layer resistance coefficient of the non-interference zone remain basically same. Effects of streaming and wake weaken gradually. When the yaw angle increases to $45^{\circ}$, aerodynamic force of the tower is close with that when there's no blade yaw and interference. As the height of significant interference zone increases, layer resistance coefficient decreases firstly and then increases under different yaw angles. Maximum means and mean square error (MSE) of radial displacement under different yaw angles all occur at circumferential $0^{\circ}$ and $180^{\circ}$ of the tower. The maximum bending moment at tower bottom is at circumferential $20^{\circ}$. When the yaw angle is $0^{\circ}$, the maximum downwind displacement responses of different blades are higher than 2.7 m. With the increase of yaw angle, MSEs of radial displacement at tower top, downwind displacement of blades, internal force at blade roots all decrease gradually, while the critical wind speed decreases firstly and then increases and finally decreases. The comprehensive analysis shows that the worst aerodynamic performance and wind-induced response of the wind turbine system are achieved when the yaw angle is $0^{\circ}$, whereas the worst stability performance and ultimate bearing capacity are achieved when the yaw angle is $45^{\circ}$.

• Wind and Structures
• /
• 제14권5호
• /
• pp.383-411
• /
• 2011

Roof is an integral part of building envelope. It protects occupants from environmental forces such as wind, rain, snow and others. Among those environmental forces, wind is a major factor that can cause structural roof damages. Roof due to wind actions can exhibit either flexible or rigid system responses. At present, a dynamic test procedure available is CSA A123.21-04 for the wind uplift resistance evaluation of flexible membrane-roofing systems and there is no dynamic test procedure available in North America for wind uplift resistance evaluation of rigid membrane-roofing system. In order to incorporate rigid membrane-roofing systems into the CSA A123.21-04 testing procedure, this paper presents the development of a load cycle. For this process, the present study compared the wind performance of rigid systems with the flexible systems. Analysis of the pressure time histories data using probability distribution function and power spectral density verified that these two roofs types exhibit different system responses under wind forces. Rain flow counting method was applied on the wind tunnel time histories data. Calculated wind load cycles were compared with the existing load cycle of CSA A123.21-04. With the input from the roof manufacturers and roofing associations, the developed load cycles had been generalized and extended to evaluate the ultimate wind uplift resistance capacity of rigid roofs. This new knowledge is integrated into the new edition of CSA A123.21-10 so that the standard can be used to evaluate wind uplift resistance capacity of membrane roofing systems.

• 한국지반신소재학회논문집
• /
• 제5권1호
• /
• pp.15-23
• /
• 2006

모래다짐말뚝 및 쇄석말뚝 공법의 경우, 연약지반의 보강, 극한지지력의 증대 및 기초지반의 압밀을 가속화시키기 위한 목적으로 지난 수십 년간 폭넓게 적용되고 있다. 쇄석말뚝공법은 비교적 강성이 크고 압축성이 작은 쇄석 등을 이용하여 다짐말뚝을 형성, 연약지반을 개량하는 공법이지만 횡방향 구속압력이 충분하게 발휘되지 않는 지반에서는 팽창파괴(bulging failure)에 대한 저항이 없어 적용이 불가능하게 된다. 따라서 본 연구에서는 쇄석말뚝의 활용도를 높이기 위해 팽창파괴 및 전단파괴 등을 방지하여 침하량을 상당부분 억제시킬 수 있는 고강도 지오그리드 보강 쇄석말뚝공법을 개발하였다. 본 공법 개발을 위해 삼축압축시험을 통하여 치환율 및 구속압력에 따른 일반적인 쇄석말뚝의 거동특성을 우선 살펴보았다. 아울러 유한요소 해석을 통한 3차원 수치해석을 시행하여 지오그리드의 종류 및 지오그리드 보강심도변화에 따른 지오그리드 보강 쇄석말뚝공법의 거동특성 및 침하저감효과를 평가함으로써 지오그리드 보강 쇄석말뚝의 적용성을 평가해 보았다.

• 한국작물학회지
• /
• 제36권1호
• /
• pp.22-33
• /
• 1991

간장이 다른 수도 2품종에 대하여 NaCl, KCl, Mannitol을 처리하고 잎의 신장과 광합성능의 반응을 조사하였다. 그리고 염처리에 의하여 잎의 신장이 일시적으로 정지하고 신장률이 둔화되는 현상 및 높은 농도에서 광합성능이 저하되는 원인에 대하여 고찰하였다.

• Computers and Concrete
• /
• 제14권2호
• /
• pp.127-143
• /
• 2014

LOCA (Loss Of Coolant Accident) is one of the most important utmost accidents for Prestressed Concrete Containment Vessel (PCCV) due to its coupled effect of high temperature and inner pressure. In this paper, heat conduction analysis is used to obtain the LOCA temperature distribution of PCCV. Then the elastic internal force of PCCV under LOCA temperature is analyzed by using both simplified theoretical method and FEM (finite element methods) method. Considering the coupled effect of LOCA temperature, a nonlinear elasto-plasitic analysis is conducted for PCCV under utmost internal pressure considering three failure criteria. Results show that the LOCA temperature distribution is strongly nonlinear along the shell thickness at the early time; the moment result of simplified analysis is well coincident with the one of numerical analysis at weak constraint area; while in the strong constrained area, the value of moments and membrane forces fluctuate dramatically; the simplified and numerical analysis both show that the maximum moment occurs at 6hrs after LOCA.; the strain of PCCV under LOCA temperature is larger than the one of no temperature under elasto-plastic analysis; the LOCA temperature of 6hrs has the greatest influence on the ultimate bearing capacity with 8.43% decrease for failure criteria 1 and 2.65% decrease for failure criteria 3.

• Journal of Trauma and Injury
• /
• 제28권4호
• /
• pp.223-231
• /
• 2015

Purpose: Delayed, traumatic, intraparenchymal hemorrhage (DTIPH) is a well-known contributing factor to secondary brain damage that evokes severe brain edema and intracranial hypertension. Once it has occurred, it adversely affects the patient's outcome. The aim of this study was to evaluate the prognosis factors for DTIPH by comparing clinical, radiological and hematologic results between two groups of patients according to whether surgical treatment was given or not. Methods: The author investigated 26 patients who suffered DTIPH during the recent consecutive five-year period. The 26 patients were divided according to their having undergone either a decompressive craniectomy (n=20) or continuous conservative treatment (n=6). A retrospective investigation was done by reviewing their admission records and radiological findings. Results: This incidence of DTIPH was 6.6% among the total number of patients admitted with head injuries. The clinical outcome of DTIPH was favorable in 9 of the 26 patients (34.6%) whereas it was unfavorable in 17 patients (65.4%). The patients with coagulopathy had an unexceptionally high rate of mortality. Among the variables, whether the patient had undergone a decompressive craniectomy, the patient's preoperative clinical status, and the degree of midline shift had significant correlations with the ultimate outcome. Conclusion: In patients with DTIPH, proper evaluation of preoperative clinical grading and radiological findings can hamper deleterious secondary events because it can lead to a swift and proper decompressive craniectomy to reduce the intracranial pressure. Surgical decompression should be carefully selected, paying attention to the patient's accompanying injury and hematology results, especially thrombocytopenia, in order to improve the patient's neurologic outcomes.

• 복합신소재구조학회 논문집
• /
• 제2권4호
• /
• pp.35-43
• /
• 2011

본 연구는 등분포 하중에 종속된 폼내장 콘크리트 샌드위치 패널 (foam insulated concrete sandwich panel)의 구조거동특성을 파악하였다. 유한요소모델이 콘크리트, 폼 그리고 철근의 비선형거동과 연결부재 (connector)의 상세 전단저항거동을 모사하기위해 사용되었다. 개발된 모델은 미주리대학 (University of Missouri)에서 수행된 정적실험자료를 사용하여 검증되었다. 합성 및 비합성 거동이 샌드위치패널의 구조거동에 미치는 영향을 정확히 모사하기 위해 전단연결재의 저항력을 모델에 정확히 반영하는 것이 중요하다. 본 연구에서 개발된 모델은 구조물의 극한강도 및 좌굴이후의 거동까지 모사하였고 미국콘크리트 학회 (ACI)의 설계예제와 비교하였다. 본연구의 결과는 정적 및 동적하중에 종속된 폼내장 콘크리트 샌드위치 패널의 해석및 설계에 유용한 정보를 제공할 것이다.

• 한국지반환경공학회 논문집
• /
• 제2권2호
• /
• pp.13-22
• /
• 2001

본 연구에서는 제지회를 성토재로 활용할 경우 제지회의 지지력 특성을 파악하기 위하여 원심모형실험을 실시하였다. 모형실험은 기초폭과 중력수준을 변화시켜 실시하였으며, 하중재하에 따른 침하와 수직토압을 측정하였다. 모형실험결과는 지지력 이론 및 유한차분 해석프로그램인 FLAC을 이용한 수치해석 결과와 비교 분석하였다. 실험결과, 하중-침하특성은 침하비 s/B가 약 25~30%에서 변곡점을 나타내는 국부전단파괴 양상을 보이며, g-level과 기초폭이 증가할수록 하중강도가 증가하고 있다. 실험에서 측정된 극한지지력은 Terzaghi 이론에 의한 결과와 유사한 것으로 나타났다. 기초 중심에서 이격거리가 증가할수록 수직토압이 크게 감소하였으며, E/B가 7이상에서는 하중재하에 따른 응력증가가 거의 발생하지 않았다. 하중재하에 의한 수직변위는 기초 직하부에서 가장 크며, 깊이 4cm 이상, 이격거리 E/B=5.0 이상에서는 거의 발생하지 않는 것으로 나타났다.

• 한국재료학회지
• /
• 제30권2호
• /
• pp.51-56
• /
• 2020

In this study, three kinds of metal chills such as SS400, AC4CH and brass, with different thicknesses of 40 ~ 80 mm, were applied for low pressure casting of Al-Si alloy to control cooling rate. The microstructural characteristics with increasing cooling rate were represented using factors including D₁, D₂, size of primary α phases and shape factor and size of eutectic Si. The tensile properties were investigated and additionally analyzed based on the microstructural characteristics. As the cooling rate increased, D₁, D₂, and sizes of primary α phases and eutectic Si apparently decreased and the shape factor of eutectic Si increased to over 0.8. The ultimate tensile strength (UTS) and yield strength (YS) increased with decreasing D₁, D₂, and size of primary α phases, while elongation increased with decreasing size of eutectic Si and concurrently increasing shape factor of eutectic Si. This indicated that the primary α phases and eutectic Si in Al-Si alloy were refined with increasing cooling rate, resulting in improvement of UTS and YS without sacrificing elongation. After the tensile test, preferential deformation of primary α phases was observed in the Al-Si alloy produced at higher cooling rates of more than 0.1 K/s.