• Title/Summary/Keyword: Ulsan port

Search Result 209, Processing Time 0.031 seconds

A Study on the Allowable Range of Overhanging Berthing at the Port of Ulsan

  • Kim, Seungyeon;Yu, Yongung;Lee, Yunsok
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.25 no.3
    • /
    • pp.313-319
    • /
    • 2019
  • As vessels become larger and competition between ports intensifies, there has been an increase in the number of cases where vessels that exceed the available berths are berthed at the pier. Therefore, there has been an increase in the number of cases in which the bow or stern of a ship is projected and moored. The risk of overhanging berthing is that mooring safety can be compromised because it is not possible to connect the bow and stern mooring line to the ship properly. In addition, collision accidents may occur between moving vessels if the view of a vessel moving in the port is obstructed. Therefore, in this study, the simulation of mooring safety was performed according to the overhanging range in Piers No. 6 and 7 in Ulsan's main port to propose the overhanging limit and operational standards according to each ship. As a result of the assessment, 30,000 DWT bulkers are able to overhang up to 0.75B, and 50,000 DWT bulkers can overhang up to 0.50B. The results of this study are expected to be used as basic data for setting the allowable overhang limit, as well as clear usage criteria for safe unloading operations.

A Study on Estimating Ship Emission - Focusing on Gwangyang Port and Ulsan Port (선박에 기인한 대기오염물질 배출량 산정 연구 -광양항과 울산항을 중심으로)

  • Zhao, Ting-Ting;Yun, Kyong-Jun;Lee, Hyang-Sook
    • Journal of Korea Port Economic Association
    • /
    • v.35 no.2
    • /
    • pp.93-108
    • /
    • 2019
  • Recently, air pollution from the marine ports has become a serious issue all over the world. Because marine trade accounts for 99.7% of Korea's trade, efforts are required to recognize the level of port pollution and establish environmental policies. This study estimates air pollution emitted during the berthing process in the Gwangyang and Ulsan ports. Data on ship activity and characteristics are collected and reasonable methodologies and factors from EEA and EPA are adopted. The results show that 253.09 tons of CO, 1986.61 tons of NOx, 684.01 tons of SOx, 47.88 tons of $PM_{10}$, and 44.69 tons of $PM_{2.5}$ are emitted at the Gwangyang port. Further, the Ulsan port emitted 212.28 tons of CO, 1712.54 tons of NOx, 573.72 tons of SOx, 40.16 tons of $PM_{10}$, and 37.48 tons of $PM_{2.5}$. A stage-by-stage plan for installing AMP infrastructure is suggested as part of a green port policy. This research provides the current pollution status and contributes guidelines for the direction of future policy.

The Phase Sensitivity of the Coincidence Detection in one Output Port of a Mach-Zehnder Interferometer

  • Shin Harim;Kim Henoh;Park Goodong;Kim Taesoo
    • Journal of the Optical Society of Korea
    • /
    • v.9 no.4
    • /
    • pp.169-172
    • /
    • 2005
  • The phase sensitivity of the coincidence detection in one output port of a Mach-Zehnder interferometer is analysed for twin Fock state inputs. Firstly, the ideal detectors with quantum efficiency of unity are assumed for the detection of the output photons. The sensitivity is found out to be independent of the photon number of input light, which means that the Heisenberg limit cannot be reached in the coincidence detection even with ideal detectors. Secondly, the practical detectors with quantum efficiencies less than unity are discussed.

Comparison Analysis between the IWRAP and the ES Model in Ulsan Waterway

  • Kim, Dae-Won;Park, Jin-Soo;Park, Young-Soo
    • Journal of Navigation and Port Research
    • /
    • v.35 no.4
    • /
    • pp.281-287
    • /
    • 2011
  • According to the Marine Traffic Safety Law, revised in 2009, Marine Traffic Safety Audit is introduced to secure the safe navigation, to prevent the marine accident and to maximize the efficiency of the port. In this audit system, marine traffic safety assessment is the most important scheme because the primary purpose of the audit system is to identify potential risk elements affecting safe navigation. Even though the reliability of audit result depends on the selection of assessment models, there are no independent assessment models for Korean coastal waters and most of models used in Korea currently are developed by foreign countries. Therefore, the development of the independent assessment model for Korean coastal water is required. This study, prior to the development of independent assessment model, aims to provide a basic data by comparing two foreign assessment models in Ulsan port area with marine accident statistics data.

Completely Port-Accessed Atrial Septal Defect Patch Closure Using the da Vinci System (다빈치 로봇을 이용한 포트 접근에 의한 심방중격 결손 폐쇄 수술)

  • Kim, Gwan-Sic;Lee, Jae-Won;Jung, Sung-Ho;Kim, Joon-Bum;Jung, Jong-Pil
    • Journal of Chest Surgery
    • /
    • v.43 no.4
    • /
    • pp.409-412
    • /
    • 2010
  • We have experienced five cases of atrial septal defect closure under complete port access using the da Vinci system. We used only six 8∼12 mm ports without thoracotomy or sternotomy for operation.

A Study on the Analysis of Present Navigation Method at the Ulsan waterways from the viewpoint of Pilot (도선사의 관점에서 본 울산항 도선구의 통항 현황 분석에 관한 연구)

  • Choi, Kei-Yel;Lee, Dong-Sup;Park, Young-Soo
    • Journal of Navigation and Port Research
    • /
    • v.35 no.6
    • /
    • pp.469-475
    • /
    • 2011
  • Ulsan pilotage is one of the most busy pilots boarding among the korean pilotages. The route layout of ulsan port is simple but the complex degree of marine traffic flow is high because there are many navigating ships from/to piers and anchorages nearby route. So, this paper is surveyed and analysised the navigating dangerous factors as to navigation danger elements in/near the route, the proper distance between piers at the ulsan waterways. And this research assures the same place where shiphandling bunder is occurred to compare the danger sense of pilot with environment stress to represented the mariner's shiphandling stress quantitatively at the ulsan route.

A study on the Characteristics of Irregular Wave Transformation in the vincinity of Ulsan New Port by using the DELFT-3D (DELFT-3D를 이용한 울산신항 주변해역의 불규칙파랑변형에 관한 연구)

  • Kim Jae-Joong;Kim Nam-Hyun
    • Journal of Navigation and Port Research
    • /
    • v.29 no.3 s.99
    • /
    • pp.257-262
    • /
    • 2005
  • Environmental problems and safety problems in coastal area is one of the most important factors for designing coastal structures and maintaining facilities in coastal zone. And thus study on Wave transformation around coastal area is very important to develope a new port or on industrial area. Delft 3D-WAVE is applied to Ulsan new port area and the culculated results are analysed and compared with measured data Delft 3D-wave module is based on SWAN model which considers wave shoaling and refraction for irregular wave. This module also covers wind effect, bottom friction. white-capping and wave breaking effect. The results of this study show a good agreement with measured data and thus Delft 3D-WAVE module can be applied to simulate irregular wave transformation in coastal area.

A Study on the Design of Digital Twin-Based Communication Tools for Smart Port and Autonomous Ship (스마트항만-자율운항선박 연계를 위한 디지털 트윈 기반 커뮤니케이션 도구 설계 연구)

  • Cho Yuseong;Cho Yongdeok;Koo Hanmo;Koopo Kwon
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 2022.11a
    • /
    • pp.362-365
    • /
    • 2022
  • With the development of the 4th industrial revolution technology, smartization in various fields is accelerating. The shipping and logistics industry is also promoting smartization by combining advanced new technologies such as digital twin, Internet of Things, and artificial intelligence. In Korea, the Ministry of Maritime Affairs and Fisheries is promoting a strategy to spread the smart shipping logistics system in line with the changing global shipping logistics trend, and through this, it is creating a foundation for smart shipping logistics. This study aims to present the concept of a communication tool that recognizes the importance of communication between each logistics entity and exchanges opinions between logistics entities in a virtual digital twin environment to cope with the changing shipping logistics process. In addition, for the development of these communication tools, this study derive a software design model, including architecture.

  • PDF

A Study on the Particle Size and Velocity Profile on a Gasoline Port Injector Using a Phase Doppler Particle Analyzers (PDPA) (위상 도플러 입자 분석기(PDPA)를 이용한 가솔린 포트 인젝터의 입자 크기 및 속도 프로파일에 관한 연구)

  • KIM, HYOJIN;JO, HYUN;TONGCHAI, SAKDA;LIM, OCKTACKE
    • Transactions of the Korean hydrogen and new energy society
    • /
    • v.28 no.3
    • /
    • pp.300-307
    • /
    • 2017
  • This study is to investigate particle size and velocity profile of gasoline port injector using Phase Doppler Particle Analyzer (PDPA). In this experiment, a GV 250 Delphi port injector used for motorcycles was used for liquid injection. The injector consists of four holes and has a static flow rate of 2.13 g/s. The fuel used in the injection was N-heptane, which is similar to gasoline, as an alternative fuel. The test fuel was injected at an atmospheric temperature of $20^{\circ}C$ and an open atmosphere of 1 atm. The injection time was 10 ms and the injection pressure was 3.5 bar in PDPA experiment. The experimental target position was fiexd at 30, 50 and 75 mm from the nozzle tip and data were collected for a total of 10,000 samples. The experimental results show that the length diameter (D10), the Sauter mean diameter ($D_{32}$), and the mean droplet velocity (MDV) are $45-54{\mu}m$, $99-115{\mu}m$ and 15-21 m/s, respectively.