• Journal of the Korean association of regional geographers
• /
• v.11 no.6
• /
• pp.530-542
• /
• 2005

In this study, GIS method has been used to get fractal characteristics. Using the projected area and surface area, 2 dimensional fractal characteristic of terrain was found out. Correlation of fractal dimension and mean slope were also checked over. Results are as below. 1) To get a fractal dimension, the method which is using the surface area is also directly proportional to complexity of the terrain as other fractal dimension. 2) Fractal dimensions using the surface area, that is proposed in this thesis are carried out as below : Uiseong : $2.02{\sim}2.15$ Yeongcheon : $2.10{\sim}2.24$. These values are in a range of fractal $2.10{\sim}2.20$ dimensions which has known. 3) Correlation of mean slope and fractal dimension is diminished about 30% in a region which is more than $25^{\circ}$ of mean slope. So, in this region using the fractal dimension method is better than using the mean slope. From this study, on formula using the projected area and surface area is still good to get a fractal dimension that has been found. But to confirm this method the region of research should be wider and be set up the correlation of mean slope, surface area and fractal dimension. It can be applicable to restoration of terrain and traffic flow analysis in the future research.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.14 no.4
• /
• pp.260-264
• /
• 2012

Accuracy of daily solar radiation estimated from a Mountain Microclimate Simulation Model (MT-CLIM) was assessed for seven observation sites with complex topography in Uiseong County. The coefficient of determination ($R^2$) between the observed and the estimated daily solar radiation was 0.52 for 7 sites for the study period from 1 August to 30 September 2009. Overall, the MT-CLIM overestimated the solar radiation with root mean square error (RMSE) of $3.83MJ\;m^{-2}$ which is about 25% of the mean daily solar radiation ($15.27MJ\;m^{-2}$) for the study period. Considering that the pyranometer's tolerance is ${\pm}5%$ of standard sensor, the RMSE of MT-CLIM was too large to accept for a direct application for agricultural sector. The reliability of solar radiation estimated by MT-CLIM must be improved by considering additional ways such as using a topography correction coefficient.

• Korean Journal of Plant Resources
• /
• v.23 no.1
• /
• pp.99-114
• /
• 2010

This study was carried out to clarify the distribution of vascular plants and their usefulness at Gallasan of Andong-si in Gyeongbuk (596.2 m, N $36^{\circ}29'396"{\sim}36^{\circ}29'356"$, E $128^{\circ}43'841"{\sim}128^{\circ}45'799"$). The vascular plants collected 13 times (April 2006 to August 2009) were consisted of total 424 taxa; 92 families, 273 genera, 365 species, 2 subspecies, 47 varieties and 10 forms. Among them, edible, medicinal, industrial, ornamental and unknown of usefulness plants were 239 taxa, 291 taxa, 109 taxa, 135 taxa, 24 taxa, respectively. Korean endemic plants of this area were 9 taxa, and Law-protected plants by Ministry of Environment were 2 taxa, and the special plants species based on floral region by Ministry of Environment were 7 taxa in grade III category, 1 taxa in grade IV category, 5 taxa in grade V category, rare plants were 1 taxon in critically endangered (CR), 3 taxa endangered species (EN), 2 taxa vulnerable (VU), the naturalized plants were 23 taxa.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.6
• /
• pp.899-903
• /
• 2005

One of the most important volatile aroma compounds responsible for mushroom flavor is 1-octen-3-ol. To meet the demand for natural mushroom flavor, a study was needed for the production of natural chiral specific (-)-1-octen-3-ol that has higher flavor intensity than synthetic chiral mixtures of (+), and (-)-1-octen-3-ol. The biosynthesis of (-)-1-octen-3-ol was achieved by an aerobic oxidation using lipoxygenase (LOX) and hydroperoxide lyase (HPOL) isolated from commercially available mushrooms in Korean market. Safflower oil from Uiseong, Gyeongsangbuk-do, that contains $\geq75\%$ of linoleic acid, was hydrolyzed using lipase. The recovered linoleic acid was biotransformed to stereo-specific 10-hydroperoxy linoleic acid by LOX. 10- hydroperoxy linoleic acid was further cleaved to (-)-1-octen-3-ol by HPOL. A commercial bioprocess for the production of (-)-1-octen-3-ol was developed using a 5-liter jar fermenter with fruiting bodies of Agaricus bisporus harvested from Buyeo, Chungcheongnam-do. The maximum production of (-)-1-octen-3-o1 was achieved at $4^{\circ}C$, pH 6.5 and 800 rpm yielding 748 mg/kg of mushroom.

• Journal of the Korean association of regional geographers
• /
• v.15 no.1
• /
• pp.1-15
• /
• 2009

This study aims to provide preliminary data needed for establishing policies on the environment and disasters of Goryeong county. The main results are as follows. First, the present master plan of the region does not reflect local socio-economic and environmental conditions and the local people's opinion. Second, The air conditions of Gyeongbuk province and Goryeong county are within the permitted limit of air pollution of Korea. Third, the analysis of water pollution index in Nakdong river system shows improvement of water quality in both Andong and Goryeong. Fourth, the conditions of waste collection and disposal are improved in both Gyeongbuk province and Goryeong county. Fifth, in case of environmental pollutant emitting facilities of Gyeongbuk province, the proportion of 1st to 4th grade(relatively much more environmental pollutant emitting quantity than 5th grade) tends to be increasing. Sixth, environmental pollutant emitting facilities of Goryeong county are remarkably increasing in Dasan, Gaegin, Ssangrim, involving industrial complex. Finally, in case of disasters, it is relatively stable in Yecheon, Gumi, Uiseong, Yeongju and Cheongdo, while relatively unstable in Seongju, Gunwi, Yeongcheon, Chilgok, Mungyeong, Bonghwa and Goryeong.

• Journal of the Korean GEO-environmental Society
• /
• v.20 no.3
• /
• pp.21-30
• /
• 2019

Composite pile, which is composed of the steel pipe pile in which the large horizontal force acts and the PHC pile in which the small horizontal force acts by a special connecting devices, is being commercialized as a base material for civil engineering structures. The core of such a composite pile can be said to be a design criterion for estimating the joint position and stability of the connection device between steel pipe pile and PHC pile. In Korea, there is no precise specification for the location of composite pile joints. In the LH Design Department (Korea Land & Housing Corporation, 2009), "Application of composite pile design and review of design book marking" was made with reference to Road Design Practice Volume 3 (Korea Expressway Corporation, 2001). this is used as a basis of the design of the composite pile. It can not be regarded as a section change of the composite pile, so it has a limitation in application. Therefore, In this study, we propose a design criterion for the location of the section of the composite pile (joint of steel pipe pile and PHC pile) and evaluate the stability and economical efficiency of it by using experimental method and analytical method. Analysis of composite pile design data installed in 79 domestic bridges abutment showed that the stresses, bending moments, and displacements acting on the pile body and connection of the pile were analyzed. Through the redesign process, it was confirmed that the stresses generated in the connecting device occur within the allowable stress values of the connecting device and the PHC pile. In conclusion, the design proposal of composite pile joint location through empirical case study in this study is an improved design method considering both stability and economical efficiency in designing composite pile.

• Journal of Korean Library and Information Science Society
• /
• v.54 no.1
• /
• pp.115-142
• /
• 2023

The purpose of this study is to classify the quality attributes of service quality for the elderly in public libraries, derive satisfaction coefficients and dissatisfaction coefficients, and present the priority improvement of service quality. To this end, a survey was organized with 22 questions from LibQUAL+ for elderly users who use library in uiseong-gun, gyeongsangbuk-do. Quality factors for service were classified into three areas of LibQUAL+ based on the kano model, and the satisfaction index and dissatisfaction index felt by users for each service quality were calculated through timko's customer satisfaction coefficient. Based on this, a Potential Customer Satisfaction Improvement index (PCSI index) was obtained to determine how much user satisfaction can be improved when actual requirements are met. As a result of classification of quality attributes of service quality, it was classified into 9 attractive quality, 7 one-dimensional quality, 1 indifference quality, and 5 must-be quality. In the improvement ranking for service, the first place was 'making electronic resources accessible from my home or office', the second place was 'print and/or electronic journal collections I require for my work' and the third place was 'a library web site enabling me to locate information on my'. It is expected that the study results can be used to present quality factors that should be managed and improved first when providing services for the elderly.

• Korean Journal of Ichthyology
• /
• v.34 no.4
• /
• pp.244-252
• /
• 2022

The aim of this study was to investigate the early life history of Squalidus gracilis majimae by observing the development of the eggs and morphology of juvenile fish. Squalidus gracilis majimae used in this study were captured in 2021 June from a tributary flowing into Wicheon, located in Uiseong-gun, Gyeongsangbuk-do. For artificial insemination, ovaprim was injected at 0.5 mL/kg. Egg development occurred 12 h after injection. The size of mature eggs of S. gracilis majimae was 0.80~0.85 mm (0.83±0.01 mm, n=30). Incubation time at 22±1℃ ranged from 62.5 to 69 h. The length of larvae immediately after hatching was 2.39~2.53 mm (2.44±0.04 mm, n=30). On the 18th day after hatching, the larvae had a total length of 8.51~9.84 mm (8.95±0.42 mm, n=30), and the tip of the spine was completely curved. On the 22nd day after hatching, the juvenile fish had a total length of 12.6~13.6 mm (13.0±0.36 mm, n=30), with dorsal fins at iii7 and anal fins at i7. Egg size and hatched larvae size were similar for S. gracilis majimae and S. multimaculatus, and cupulae showed a singularity as it disappeared last among related species.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.60 no.2
• /
• pp.153-166
• /
• 2015

Production of high quality pigmented rice contained with high content of anthocyanin, and polyphenol was significantly influenced by cultivation environments like transplanting date and cultivation location. This study was carried out to establish an optimum transplanting date and cultivation region to produce maximum content of anthocyanin, polyphenol and antioxidant activity of pigmented rice varieties (black, red colored). Three transplanting times (May 20, June 5, June 20) and four different sites (Miryang, Uiseong, Sangju, Bonghwa) were evaluated with five pigmented rice cultivars. Anthocyanin and total polyphenol index to average temperature during 30 days after heading (DAH) of black, red pigmented rice varieties showed that anthocyanin and total polyphenol contents were decreased by 10% and 9%, respectively, with increasing average temperature of $1^{\circ}C$. The optimum ripening temperature of the 30 DAH for the production of high anthocyanin and total polyphenol was 22 to $23^{\circ}C$ for early maturity black rice, 21 to $22^{\circ}C$ for mid-late maturity of black and red rices, respectively. On the other hand, an estimated heading date of pigmented rices in return according to the optimum ripening temperature of the 30 DAH was ranged Aug. 11 to 17 for early maturity black rice, Aug. 25 for mid-late maturity black, red rice variety in Jecheon, Aug. 27 to Sep. 2 for early maturity type, Sep. 3 to 6 for mid-late type in Daegu. It seemed that Jecheon, Boeun, Mungyeong, and Yeongju were optimum regions for cultivation of pigmented rices. The estimated sowing date of pigmented rices for high anthocyanin and total polyphenol production based on the optimum heading date was May 18 to 26 for early maturity black rice variety, April 11 for mid-late black, red variety in Jecheon, May 23 to 28 for early type, April 9 to 26 for mid-late type in Boeun, respectively.

• Economic and Environmental Geology
• /
• v.45 no.2
• /
• pp.71-78
• /
• 2012

Illite-smectite mixed layers (I-S) occurring authigenically in diagenetic and hydrothermal environments reacts toward more illite-rich phases as temperature and potassium ion concentration increase. For that reason, I-S is often used as geothermometry and/or geochronometry at the field of hydrocarbons or ore minerals exploration. Generally, I-S shows X-ray powder diffraction (XRD) patterns of ultra-thin lamellar structures, which consist of restricted numbers of sillicate layers (normally, 5 ~ 15 layers) stacked in parallel to a-b planes. This ultra-thinness is known to decrease I-S expandability (%S) rather than theoretically expected one (short-stacking effect). We attempt here to quantify the short stacking effect of I-S using the difference of two types of expandability: one type is a maximum expandability ($%S_{Max}$) of infinite stacks of fundamental particles (physically inseparable smallest units), and the other type is an expandability of finite particle stacks normally measured using X-ray powder diffraction (XRD) ($%S_{XRD}$). Eleven I-S samples from the Geumseongsan volcanic complex, Uiseong, Gyeongbuk, have been analyzed for measuring $%S_{XRD}$ and average coherent scattering thickness (CST) after size separation under 1 ${\mu}m$. Average fundamental particle thickness ($N_f$) and $%S_{Max}$ have been determined from $%S_{XRD}$ and CST using inter-parameter relationships of I-S layer structures. The discrepancy between $%S_{Max}$ and $%S_{XRD}$ (${\Delta}%S$) suggests that the maximum short-stacking effect happens approximately at 20 $%S_{XRD}$, of which point represents I-S layer structures consisting of ca. average 3-layered fundamental particles ($N_f{\approx}3$). As a result of inferring the $%S_{XRD}$ range of each Reichweite using the $%S_{XRD}$ vs. $N_f$ diagram of Kang et al. (2002), we can confirms that the fundamental particle thickness is a determinant factor for I-S Reichweite, and also that the short-stacking effect shifts the $%S_{XRD}$ range of each Reichweite toward smaller $%S_{XRD}$ values than those that can be theoretically prospected using junction probability.