• 한국인터넷방송통신학회논문지
• /
• 제19권2호
• /
• pp.53-58
• /
• 2019

가입자 및 디바이스의 폭발적인 증가와 복잡한 서비스에 대한 수요와 다양한 요구가 늘어나면서 이를 충족하기 위한 네트워크의 진화는 계속되고 있다. 특히, LTE를 기점으로 하여 LTE 네트워크에서 늘어나는 트래픽과 시그널링 폭증 및 5G로 발전을 위하여 다양한 기술적인 대안들이 나오고 있다. 본 연구는 늘어난 부하와 정보 관리의 복잡도로 인해 야기되는 UDC 성능 문제의 개선에 관한 것으로, 특히, 3GPP 표준 LDAP기반의 Ud 인터페이스 통신 프로토콜과 Private기반의 Ud 인터페이스 통신 프로토콜의 수신 메시지 수 및 응답 메시지수의 처리에 대한 비교 실험을 수행하였다. 결과적으로 새로 정의된 Ud 인터페이스 통신 프로토콜이 Ud 인터페이스방식에 기반한 LDAP보다 평균 1.7배 성능 개선이 이루어진 것을 확인하였다.

• 인터넷정보학회논문지
• /
• 제15권5호
• /
• pp.83-93
• /
• 2014

사용자 컨텍스트에 의거하여 개인화된 서비스를 제공하는 것은 점점 중요한 이슈가 되고 있다. 따라서 많은 서비스들은 더 나은 서비스를 제공하기 위해 Context-awareness 기술을 적용하고 있다. MPEG과 W3C 등의 표준화 기구에서도 Context-awareness 서비스를 개선하기 위한 컨텍스트 표준화를 위해 노력하고 있다. 하지만 기존의 MPEG7, MPEG-21, MPEG-V, EmotionML와 같은 컨텍스트 기반 표준화들은 다양한 시스템과 서비스에 적용하기에는 적합하지 않다. 이를 극복하기 위해 MPEG-UD 표준은 사용자를 위한 추천시 관련한 컨텍스트 정보를 사용하여 추천 결과를 만들어내는 서비스들과의 상호 호환성을 고려한 컨텍스트 표준화를 목표로 한다. 본 논문에서는 MPEG-UD를 비롯한 컨텍스트 관련 표준화 연구를 소개 하고 MPEG-UD 표준을 기반으로 한 RD-Engine 구조와 사용자 인터페이스 제공 서비스 시스템을 제안한다. 제안하는 시스템은 MPEG-UD로 서술되는 사용자의 컨텍스트를 사용하며, 특정 조건에 맞는 단위리소스를 수집하고 디바이스의 특성을 반영하여 실시간으로 적응적인 사용자 인터페이스를 생성한다. 자동적으로 적응적인 개인 컨텍스트에 따른 적응적 사용자 인터페이스를 생성하는 시스템은 복합적 서비스 제공시 사용자의 UX 만족도를 높일 수 있을 것이다.

• 한국해양공학회지
• /
• 제10권4호
• /
• pp.58-66
• /
• 1996

The purpose of this investigation is to estimate the strength with the variations of the notch shape and the adgesive condition at the fiber/matrix micro interface of E-glass/PP laminates. To promote the degradation of the adhesive condition at the fiber/matrix micro interface without matrix dissolution loss, low-, hot-wet and spiking tests were carried out. The absorpotion properties and the tensile properties were compared accrding to the fiber orientation and the content. The results show that, firstly, saturated moisture absorption was reached at 5cycles and their absorptions of RD-40, UD-42 and UD-50 are 0.68%, 0.63%, 0.60%, respectively. Secondly, all the specimens investigated were mostly degraded at 5cycle, whereas UD-50 having ellipse shaped notch the least decrement of strength.

• 반도체디스플레이기술학회지
• /
• 제13권1호
• /
• pp.67-72
• /
• 2014

Recently released digital devices have various characteristics such as different screen sizes or different sensors embedded, according to the purpose of their use. So the device types are fragmented and the software should be independently developed for each devices with different characteristics. RRUI are being developed and standardized in progress to provide UI using user information and context information, as one way of solving the device fragmentation. In this paper, we take a look at various standards that classify and utilize user information and context information for RRUI and try to find correlations between MPEG-UD and RRUI.

• International Journal of Contents
• /
• 제12권2호
• /
• pp.12-23
• /
• 2016

This paper presents a novel concept of Disaster Prevention Design (DPD) and its derived subjects and topics for the safety of folk villages in both Korea and Japan. Nowadays, design concepts are focused on 'human-oriented nature' as a whole and this tendency fits to be appropriate for disaster prevention against real dangers of a future society, which is expected to have far more complicated features. On the other hand, convergences have performed with other areas in the field of Information Communication Technology (ICT) so that we can easily find examples like 'the strategy of ICT-based convergence' of the Korean Government in 2014. Modern content designs including UI (user interface) and USN (ubiquitous sensor network) have been developed as one of the representative areas of ICT & UD (universal design) convergences. These days this novel concept of convergence is overcoming the existing limitations of the conventional design concept focused on product and/or service. First of all, from that point our deduced topic or subject would naturally be a monitoring system design of constructional structures in folk villages for safety. We offer an integrated model of maintenance and a management-monitoring scheme. Another important point of view in the research is a safety sign or sign system installed in folk villages or traditional towns and their standardization. We would draw up and submit a plan that aims to upgrade signs and sign systems applied to folk villages in Korea and Japan. According to our investigations, floods in Korea and earthquakes in Japan are the most harmful disasters of folk villages. Therefore, focusing on floods in the area of traditional towns in Korea would be natural. We present a water-level expectation model using deep learning simulation. We also apply this method to the area of 'Andong Hahoe' village which has been registered with the World Cultural Heritage of UNESCO. Folk village sites include 'Asan Oeam', 'Andong Hahoe' and 'Chonju Hanok' villages in Korea and 'Beppu Onsen' village in Japan. Traditional Streets and Markets and Safe Schools and Parks are also chosen as nearby test-beds for DPD based on ICT. Our final goal of the research is to propose and realize an integrated disaster prevention and/or safety system based on big data for both Korea and Japan.

• Composites Research
• /
• 제36권1호
• /
• pp.16-24
• /
• 2023

본 논문에서는 복합재료의 섬유와 기지사이의 경계면 손상을 고려한 멀티스케일 점진적 피로 손상 모델을 제안한다. 먼저 점진적인 경계면 손상을 고려하기 위해 서로 다른 4개의 경계면 상태를 정의한 미소구조 모델을 도입하였다. 각각의 상태에 대한 부피분율은 피로 하중의 사이클 수가 증가함에 따라 온전한 상태의 계면에서 완전 박리 상태의 계면으로의 전환이 일어난다. 손상된 경계면의 에쉘비 텐서(Eshelby's tensor)를 계산하기 위해 선형 스프링 모델이 사용되었으며 균질화 방법을 통해 복합재료의 유효 물성을 얻었다. 또한 복합재료의 피로거동을 묘사하기 위해 교번 응력에 대한 섬유, 기지, 그리고 섬유-기지 간의 계면 각각에 대한 손상 변수들이 정의되었고 이를 chaotic firefly 알고리즘을 통해 손상 변수를 특성화 하였다. 제안된 모델은 유한요소해석프로그램 ABAQUS의 UMAT subroutine으로 구현되어 AS4/3501-6 복합재료의 단일방향 라미네이트(unidirectional laminate) 시편들([0]₈, [90]₈,[30]₁₆)을 통해 성공적으로 검증되었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.188.1-188.1
• /
• 2015

For present investigation Fe/MgO/Fe/Co multilayer stack is grown on Si substrate using e-beam evaporation in ultrahigh vacuum. This stack is irradiated perpendicularly by 120 MeV $Ag^{8+}$ at different fluences ranging from $1{\times}10^{11}$ to $1{\times}10^{13}ions/cm^2$ in high vacuum using 15UD Pelletron Accelerator at Inter University Accelerator Centre, New Delhi. Magnetic measurements carried out on pre and post irradiated stacks show significant changes in the shape of perpendicular hysteresis which is relevant with previous observation of re-orientation of magnetic moment along the direction of ion trajectory. However increase in plane squareness may be due to the modification of interface structure of stacks. X-ray reflectivity measurements show onset of interface roughness and interface mixing. X-ray diffraction measurements carried out using synchrotron radiation shows amorphous nature of MgO and Co layer in the stack. Peak corresponding body centered Fe [JCPDS-06-0696] is observed in X-ray diffraction pattern of pre and post irradiated stacks. Peak broadening shows granular nature of Fe layer. Estimated crystallite size is $22{\pm}1nm$ for pre-irradiated stack. Crystallite size first increases with irradiation then decreases. Structural quality of these stacks was further studied using transmission electron microscopic measurements. Thickness from these measurements are 54, 36, 23, 58 and 3 nm respectively for MgO, Fe, MgO, Fe+Co and Au layers in the stack. These measurements envisage poor crystallinity of different layers. Interfaces are not clear which indicate mixing at interface. With increase fluence mixing and diffusion was increased in the stack. X-ray absorption spectroscopic measurements carried out on these stacks show changes of Fe valence state after irradiation along with change of O(2p)-metal (3d) hybridized state. Valence state change predicts oxide formation at interface which causes enhanced in-plane magnetization.

• 한국안전학회지
• /
• 제28권4호
• /
• pp.14-18
• /
• 2013

Blades of horizontal axis are nowadays made of composite materials. Generally, composite materials satisfy design provides lower weight and good stiffness, while laminate composites have often damages as like the delamination and cracks at the interface of laminates. The box spar and tail parts of a blade are composed of the CFRP/GFRP hybrid laminate composites. However, delamination and the interfacial crack often occur in the interface of CFRP/GFRP hybrid laminate composites under the mixed mode fracture condition, especially mode I and mode II. Therefore, there is a need for the evaluation of the mixed mode fracture behavior during the delamination of CFRP/GFRP hybrid laminates. This study shows the experimental results for the delamination fracture toughness in CFRP/GFRP hybrid laminate composites. Fracture toughness experiments and estimation are performed by using DMMB(Dissimilar mixed mode bending) specimen. The materials used in the test are a commercial woven type CFRP(Carbon fiber reinforced plastic) prepreg(CF3327) and UD type GFRP(Glass fiber reinforced plastic) prepreg(HD224A). A CFRP/GFRP hybrid laminate composite is composed by the 10 plies CFRP and GFRP prepreg for DMMB. A thickness of CFRP and GFRP layer is 2.5mm and 3.0mm, respectively. Also the fulcrum location which is a loading parameter is changed from 80 to 100mm on the specimen of length 120mm because it defines the ratio of mode I to mode II. In this study, the effects of the fulcrum location are evaluated in the viewpoint of energy release rate in mode I and mode II contribution. The results show that the delamination crack initiates at higher displacement and lower load according to the increase of the fulcrum location ratio. And the variation of the energy release rate for mode I and II contributions for the mode mixity are shown.

• Journal of Korean Neurosurgical Society
• /
• 제45권4호
• /
• pp.213-218
• /
• 2009

Objective : This study is a retrospective clinical study over more than 4 years of follow up to understand the mechanism of load sharing across the graft-bone interface in the static locking plate (SLP) fixation compared with non-locking plate (NLP). Methods : Orion locking plates and Top non-locking plates were used for SLP fixation in 29 patients and NLP fixation in 24 patients, respectively. Successful interbody fusion was estimated by dynamic X-ray films. The checking parameters were as follows : screw angle (SA) between upper and lower screw, anterior and posterior height of fusion segment between upper and lower endplate (AH & PH), and upper and lower distance from vertebral endplate to the end of plate (UD & LD). Each follow-up value of AH and PH were compared to initial values. Contributions of upper and lower collapse to whole segment collapse were estimated. Results : Successful intervertebral bone fusion rate was 100% in the SLP group and 92% in the NLP group. The follow-up mean value of SA in SLP group was not significantly changed compared with initial value, but follow-up mean value of SA in NLP group decreased more than those in SLP group (p=0.0067). Statistical analysis did not show a significant difference in the change in AH and PH between SLP and NLP groups (p>0.05). Follow-up AH of NLP group showed more collapse than PH of same group (p=0.04). The upper portion of the vertebral body collapsed more than the lower portion in the SLP fixation (p=0.00058). Conclusion : The fused segments with SLP had successful bone fusion without change in initial screw angle, which was not observed in NLP fixation. It suggests that there was enough load sharing across bone-graft interface in SLP fixation.