• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.6 s.336
• /
• pp.61-66
• /
• 2005

In this paper, we implemented a impulse generator, the one of the part in UWB(Ultra Wide Band) system using step recovery diode(SRD) and gain-switced semiconductor laser. The impulse generator was consisted of four stages; The first stage used SRD to generate the first impulse for gain switching. The second stage controled current for the suitable gain switching condition. The third was the second impulse generator to generate gaussian pulse. For gain switching, the first impulse was applied to semiconductor laser. In the last stage the gain switched impulse was converted into mono-gaussian pulse. The measured mono-gaussian pulse was 360 psec pulse-width and $-70mV \~ +50mV$ amplitude in time domain. In frequency domain its magnitude and bandwidth was, respectively, -41dBm and 3.6GHz. Accordingly, the impulse generator that we suggested was suitable for UWB systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.8A
• /
• pp.827-835
• /
• 2007

In this paper, the extension method of data transmission range as adapting AAS(Adaptive Antenna Systems) in ECMA(European Computer Manufacturers Association) standard MB-OFDM(MultiBand-Orthogonal Frequency Division Multiplexing) UWB systems is proposed, and the complementary beamforming method which can solve hidden beam problem when we adapt AAS in CSMA/CA(Carrier Sense Multiple Access with Collision Avoidance) systems is proposed. To design the complementary beamforming, Gram-Schmidt orthogonalization is utilized, whose beam pattern exhibits perfect nulling at the main beam angles and provides uniform power for detection of channel utilization out of main beam. The proposed method can be utilized with any arbitrary beamforming when we make main beamforming. Through computer simulation, it can be shown that proposed AAS and complementary beamforming increase data transmission range from 2m to 3.95m in 480Mbps data transmission system and increase throughput about 20% as compared with general UWB AAS systems.

• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.309-312
• /
• 2004

This paper proposes the architecture of UWB OFDM communication system. More high data rate is requested in the 128-point FFT/IFFT of the UWB OFDM communication system than the conventional communication systems. So, the proposed architecture uses pipeline and parallel architecture. For a highly efficient architecture, the optimal clipping power and the input quantization bits are found in simulation. The hardware complexity of the proposed architecture is presented is consideration of Adder, Register and Complex Multiplier.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.1
• /
• pp.41-48
• /
• 2004

In this paper, we analyzed channel performance of PPM modulated UWB communication system in indoor radio fading environment that consider amplitude characteristic of channel. Fading channel considered various channel environments by fading index m utilizing Nakagami-m distribution model with data through an UBW radio signal experiment that announced in existing. Also, we improved performance of system that it is decreased in fading environment employing convolution encoding techniques.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.5
• /
• pp.884-891
• /
• 2001

In this paper, We use Antipodal signal for data modulation of Ultra Wideband(UWB) system. This has maximum Euclidean distance and -1 or 0 of correlation values. With adapting this signal to M-ary that and time hopped pattern, We designed multiple access system. UWB Antipodal signal employes Gaussian monopulse and Rayleigh monopulse. Using these signals, we analysis and compare error probability, the number of user and data rate of the two systems under the AWGN.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.429-432
• /
• 2008

In this paper, performance of a double binary turbo coded ultra wide band (UWB) system is analyzed and simulated in an indoor wireless channel. Binary pulse position modulation-time hopping (BPPM-TH) signals are considered. The indoor wireless channel is modeled as a modified Saleh and Valenzuela (SV) channel. The performance is evaluated in terms of bit error probability (BER). From the simulation results, it is seen that double binary turbo coding offers considerable coding gain with reasonable encoding complexity. It is also demonstrated that the performance of the UWB system can be substantially improved by increasing the number of iterations.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.4
• /
• pp.489-495
• /
• 2018

In this paper, we designed and fabricated WLAN / UWB communication antennas operating at 3.3 [GHz] and 5 [GHz] bands in order to effectively use the high-speed communication network system that improved antenna miniaturization, gain and radiation pattern. Microstrip patch antennas were chosen to improve the bandwidth. The slot width, length, and transmission line width were calculated using the theoretical formula for each step. Simulation results show that the return loss is -14.053 [dB] at 3.3 [GHz] and -13.118 [dB] at 5 [GHz]. The gain showed a value of 2.479 [dBi] at 3.3 [GHz] and a value of 3.317 [dBi] at 5 [GHz]. After optimizing it with the CST Microwave Studio 2014 program, which can be 3D-designed, Based on these results, we investigated the performance of antennas by measuring their characteristics. In recent years, WLAN, which is a variety of wireless technologies that are continuously developing, and UWB, which is a communication technology which is increasing in frequency band due to an increase in demand of the technology users, is used for a high speed wireless communication system. Communication seems to be possible.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.4
• /
• pp.691-697
• /
• 2016

In this paper, we propose the antenna to appropriate for a UWB communication system, and it meets characteristics for location recognition in predetermined range. Proposed tapered slot antenna was designed through the HFSS simulation tool of Ansys. Inc., it was produced by Taconic TRF-45 based on dielectric constant of 4.5, loss tangent 0.0035, thickness 1.62mm. The tapered slot antenna is analyzed the standing wave ratio and reflection coefficient, radiation pattern in the frequency domain. The impedance bandwidth range of the produced tapered slot antenna is from 3.8 ~ 8.9GHz to 5.1GHz, E-plane and H-plane radiation pattern meet directional antenna characteristics for indoor and outdoor location recognition in predetermined range. The antenna gain is 7.4 dBi(6GHz)in the simulation, the result of measurement demonstrated 7.4 dBi(6 GHz) of antenna maximum gain. Proposed tapered slot antenna meets UWB communication system but simulated and measured results were slightly different.

• Journal of Advanced Navigation Technology
• /
• v.13 no.1
• /
• pp.41-47
• /
• 2009

In this paper, a band pass filter with a rejection band is proposed for UWB(Ultra Wide Band) communication system. First, low pass filter accessed cut off frequency of 10.2 GHz was designed using structure stepped impedance. And high pass filter accessed cut of frequency of 3.2 GHz was designed using parallel short-stub. There was implemented composite connection of designed low pass filter and high pass filter. The relative dielectric constant, the height, the loss tangent of the PCB substrate were ${\varepsilon}_r$=2.2, h=0.508 mm and loss tangent = 0.0009 respectively. The fabricated band pass filter shows a compact size of 3 cm. The fabricated band pass filter was characterized using 37169A VNA(Vector Network Analyzer). And measured result were obtained 7.5 GHz of bandwidth and -10 dB of return loss and -3 dB of insertion loss from pass band. The result of the research can be used for the UWB communications and MIC/MMIC, RFIC system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.5
• /
• pp.951-957
• /
• 2005

The bit error probability of UWB Time-Hopping(TH) multiple access communication systems combined with BPSK is calculated with a high accuracy including the multiple user interference(MUI). This paper finds that with some manipulations, the TH-BPSK UWB signal can be modified to the similar form of the DS-CDMA signal. The MUI in the system is explained by the characteristic function technique. Above two descriptions have been bases on the derivation of the exact BER expression of the system. We also propose the approximate expression for the BER, which has enough accuracy compared with the expression from the Gaussian approximation of the MUI. The comparison of the results from the proposed expressions with the simulation results gives the confirmation for the validity and accuracy of the proposed expressions.