• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.6
• /
• pp.37-43
• /
• 2013

In this paper, an UWB (Ultra Wide Band) band-pass filter with open stubs using SIR (Stepped Impedance Resonator) structure is presented. The proposed band pass filter (BPF) has SIR structure instead of open stubs for UWB application with low insertion loss. The bandwidth of the proposed BPF is 103 % at the center frequency of 5.8GHz and the insertion and return losses are 0.17dB and 13.1dB, respectively. Also, the entire size of the proposed band-pass filter is $21.6{\times}17.8mm^2$.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.11
• /
• pp.1909-1913
• /
• 2008

In this paper, A compact ultra-wideband(UWB) bandpass filter(BPF) with WLAN notched filter has been proposed. H-shared slot is studied and adopted to tighten the coupling of inter-digital capacitor in order to improve the BPF's performance. Three pairs of tapered defected ground structures(DGS) are formed to assign their transmission zeros towards the out of band signal, thereby suppressing the spurious passband. Also Meander line slot is de#eloped to reject the undesired wireless local-area network(WLAN) radio signals. That's combining these three structures we obtain a small sized UWB BPF.

• Journal of electromagnetic engineering and science
• /
• v.9 no.3
• /
• pp.164-173
• /
• 2009

In this paper, two new circuit structures for European and U.S. ultra-wide band(UWB) bandpass filters(BPFs) with sharp roll-off characteristics are introduced. We show first that the ultra-wide bandpass property is obtained from a $\lambda$/4 open T resonator with a capacitively coupled $\lambda$/4 short-circuited line, which provides two attenuation poles at lower and upper cutoff frequencies. Then, two identical capacitively coupled input/output lines, which can be $\lambda$/4-length open ends or $\lambda$/2-length short ends, with the T-resonator, are adopted to suppress lower and higher frequency components outside of the pass band. There is coupling between the input and output lines providing two additional transmission zeros in the lower and upper transition bands of the filter. Since the coupling between the T-resonator with the $\lambda$/4 short-circuited line and the input/output lines limits the bandwidth of the filter to the European UWB band, both the $\lambda$/4 short-circuited line and the input/output lines are inserted between the two stacked T-resonators for the U.S. UWB band. The filter structures are simulated with ADS and HFSS and realized with low-temperature co-fired ceramic(LTCC) green tape which has the dielectric constant of 7.8. Measurement results agree well with HFSS simulation results.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.2
• /
• pp.34-39
• /
• 2007

UWB(Ultra Wide Band) system for high speed and high accurate location has been studying actively. This paper presents the design and implementation of RF transceiver for DS-CDMA(Direct Sequence-Code Division Multiple Access) UWB device. Major components of RF transceiver such as Low Noise Amplifier(LNA) and Band Pass Filter(BPF) are designed and then fabricated to meet wideband characteristics. The RF transceiver was implemented by the use of the fabricated components and commercial devices after carrying out performance simulation. Through the performance evaluation of the UWB RF transceiver with W-CDMA signal, the approach of design, implementation and evaluation of RF transceiver which is available to DS-CDMA UWB system is verified.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.299-302
• /
• 2008

In this paper, A compact ultra-wideband(UWB) bandpass filter(BPF) with WLAN notched filter has been proposed. H-shaped slot is studied and adopted to tighten the coupling of inter-digital capacitor in order to improve the BPF's performance. Three pairs of tapered defected ground structures(DGS) are formed to assign their transmission zeros towards the out of band signal, thereby suppressing the spurious passband. Also Meander line slot is developed to reject the undesired wireless local-area network(WLAN) radio signals. That's combining these three structures we obtain a small sized UWB BPF.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.12
• /
• pp.1402-1407
• /
• 2007

This paper presents a new design method of the Ultra-Wide-Band BandPass Filter using the CRLH-TL(Composite Right- and Left-Handed Transmission-line) having the Metamaterials' properties. Instead of the periodic type or many cells of the CRLH-TL, only the unit cell is used to miniaturize the target component, which can not be realized by the conventional quarter guided-wavelength resonator-based filters. Particularly, the strong coupling essential to the Ultra Wide Band is enabled by the interdigital coupled lines between the grounded stubs. The proposed design scheme is validated by the electromagnetic simulation and measurement of the fabricated filter which shows the total size of 'the guided-wavelength/9.4', the 100 % fractional bandwidth for the UWB, the insertion loss of less than 1 dB and the flat group-delay.

• Journal of the Microelectronics and Packaging Society
• /
• v.18 no.1
• /
• pp.41-47
• /
• 2011

Currently, there is widespread adoption of silicon-based technologies for the implementation of radio frequency (RF) integrated passive devices (IPDs) because of their low-cost, small footprint and high performance. Also, the need for high speed data transmission and reception coupled with the ever increasing demand for mobility in consumer devices has generated a great interest in low cost devices with smaller form-factors. The UWB BPF makes use of lumped IPD technology on a silicon substrate CSMP (Chip Scale Module Package). In this paper, this filter shows 2.0 dB insertion loss and 15 dB return loss from 7.0 GHz to 9.0 GHz. To the best of our knowledge, the UWB band-pass-filter developed in this paper has the smallest size ($1.4\;mm{\times}1.2\;mm{\times}0.40\;mm$) while achieving equivalent electrical performance.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.1
• /
• pp.138-143
• /
• 2009

In this paper, a novel ultra-wide band filter which is operating at frequency bands from 3.1 GHz to 10.6 GHz is suggested. It is modified from the conventional ring filter and consisted of a ring with two parallel open-stub with length of ${\lambda}/8$. It improves the sharpness of the conventional ring filter and is compact. The measured results show that the fabricated filter has a insertion loss of 2.1 dB and the measured group delay of the filter is less than 463 ps through UWB frequency bands.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.7
• /
• pp.704-709
• /
• 2007

In this paper, a CPW band-pass filter with a rejection band is proposed for UWB(Ultra-Wideband) communication systems. The proposed filter has a band-pass characteristic of wide-band by inserting only a slot in $50{\Omega}$ transmission line. To obtain the band-rejection function at WLAN frequency band($5.15{\sim}5.725GHz$), the designed filter is combined with folded slot resonators on the ground plane of the CPW structure. The fabricated CPW band-pass filter shows a compact size of $15.35{\times}13.60mm$, a wide passband of 2.8 GHz to 9.8 GHz and the narrow stop-band of 5.15 GHz to 5.71 GHz for 3-dB bandwidth. Also, the measured group delay is less than 400 psec throughout the operation frequency band except the rejection band.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.7-12
• /
• 2005

A compact microstrip band-selective filter for ultra-wideband (UWB) radio system is proposed. The filter combines the traditional short-circuited stub highpass filter and coupled resonator bandstop filter on both sides of the mitered 50-ohm microstrip line. To realize the pseudo-highpass filtering characteristic over UWB frequency band (3.1 GHz to 10.6 GHz), a distributed highpass filter scheme is adopted. Three coupled resonators are utilized to obtain the band stop function at the desired frequency band. By meandering the coupled resonators, there is 29% reduction in footprint compared to the traditional bandstop filter using L-shaped resonators. The measured results show that the filter has a wide passband of 146.7 % (2.1 GHz to 10.15 GHz) with low insertion loss and the stop band of 7.42 % (5.32 GHz to 5.73 GHz) for 3-dB bandwidth. The measured group delay is less than 0.7 ns within the passband except the rejection band.