• Journal of Radiation Industry
• /
• v.6 no.2
• /
• pp.139-145
• /
• 2012

Gold nanoparticles (GNPs) have led to the development of a new field in the diagnosis and treatment of diseases such as cancer. An efficient synthesis of gold nanoparticles within the range of 8~57 nm was established by ${\gamma}-ray$ irradiation. The good point of a radiation-based method is the production of gold nanoparticles with a higher concentration and narrower size distribution compared with conventional methods. The size of gold nanoparticles was controlled using two methods. : (i) varying the ${\gamma}-ray$ irradiation dose of 10 to 25 kGy and (ii) varying the concentration of $HAuCl_4$ solution from 4 to 40 mM. In addition, the GNPs were radiolabeled using $[^{125}I]NaI$ in a simple and fast manner with high yields. The produced gold nanoparticles were characterized using a transmission electron microscopy (TEM), a UV-visible spectrophotometer, and a radio-TLC imaging scanner. From these results, these radiolabeled GNPs can be applicable for a radioisotope tag of biomolecules.

• Environmental Engineering Research
• /
• v.24 no.1
• /
• pp.159-172
• /
• 2019

To investigate the influence of pollution events on the chemical composition and formation processes of aerosol particles, 24-h integrated size-segregated particulate matter (PM) was collected during the fall season at an urban site of Gwangju, Korea and was used to determine the concentrations of mass, water-soluble organic carbon (WSOC) and ionic species. Furthermore, black carbon (BC) concentrations were observed with an aethalometer. The entire sampling period was classified into four periods, i.e., typical, pollution event I, pollution event II, and an Asian dust event. Stable meteorological conditions (e.g., low wind speed, high surface pressure, and high relative humidity) observed during the two pollution events led to accumulation of aerosol particles and increased formation of secondary organic and inorganic aerosol species, thus causing $PM_{2.5}$ increase. Furthermore, these stable conditions resulted in the predominant condensation or droplet mode size distributions of PM, WSOC, $NO_3{^-}$, and $SO{_4}^{2-}$. However, difference in the accumulation mode size distributions of secondary water-soluble species between pollution events I and II could be attributed to the difference in transport pathways of air masses from high-pollution regions and the formation processes for the secondary chemical species. The average absorption ${\AA}ngstr{\ddot{o}}m$ exponent ($AAE_{370-950}$) for 370-950 nm wavelengths > 1.0 indicates that the BC particles from traffic emissions were likely mixed with light absorbing brown carbon (BrC) from biomass burning (BB) emissions. It was found that light absorption by BrC in the near UV range was affected by both secondary organic aerosol and BB emissions. Overall, the pollution events observed during fall at the study site can be due to the synergy of unfavorable meteorological conditions, enhanced secondary formation, local emissions, and long-range transportation of air masses from upwind polluted areas.

• Journal of Korean Society on Water Environment
• /
• v.37 no.6
• /
• pp.458-468
• /
• 2021

In this study, we investigated the variations of dissolved organic matter (DOM) in an agricultural reservoir during the monsoon period (June to October, 2020) with respect to the organic carbon concentration (DOC), molecular weight distribution, and optical properties. The monsoon period was divided into three phases - beginning storm (BS), during storm (DS), and after storm (AS). Our results showed significant differences in the concentrations and characteristics of DOM during the summer monsoon. The DOC concentrations were decreased after the monsoon, probably due to a dilution effect. In contrast, increasing trends were observed in the specific UV absorbance (SUVA), and relative abundances of humic-like fluorescence and larger-sized compounds. These observations implied that the large-sized and humic-like organic components with terrestrial origins strongly affected the reservoir DOM after the summer monsoon. Meanwhile, biopolymer size fraction, which is associated with algal activity, became more abundant after the monsoon. These results suggest that DOM with autochthonous sources became dominant as a result of the inflow of nutrients into the reservoir after the storm. Spatial changes in DOM within the reservoir were not pronounced as much as the temporal variations. All taken, it can be concluded that the summer monsoon simply led to the decrease of DOM concentrations while the sources and the quality of DOM underwent substantial changes, which may enrich refractory organic matter in the reservoir. This study reveals the importance of in-depth DOM quality monitoring before and after summer monsoon for effective water quality management in agricultural reservoirs.

• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.2_2
• /
• pp.389-395
• /
• 2024

The purpose of this study was to evaluate the effect of different washing solvents and washing methods on the flexural strength of 3D printed temporary resin. A bar(25 × 2 × 2 mm) was produced with a layer thickness of 50 ㎛ using an LCD-type 3D printer and divided into 15 groups(n = 10, each) according to washing solution(IPA; 99% isopropyl alcohol, TPM; 93% Tripropylene glycol monomethylether, ETL; Ethanol, TWC; Twin 3D Cleaner, and DNC; DIO navi Cleaner) and washing method(Dip; Dip washing, Ultra; Ultrasonic washing, and Auto; Automated washing). All groups were washed for 5 minutes, and post-cured for 5 minutes using a UV LED light curing machine. The Flexural strength was measured using a three-point bending test using a universal testing machine. For statistical analysis, one-way ANOVA, Tukey HSD post hoc test, Kruskal-Wallis test and post-hoc by Bonferroni-Dunn test(𝛼=.05) were performed depending on whether the normality test was satisfied. In all washing solvents except TPM and DNC, the Dip group showed the lowest flexural strength values, while the Auto group showed the highest flexural strength values except for DNC. Additionally, the washing solution showed completely different flexural strength values depending on the washing method.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.41 no.4
• /
• pp.325-331
• /
• 2015

Skin is exposed to sunlight or artificial indoor light on a daily. The reached solar light on the earth surface consist of 50% visible light and 45% infrared (IR) except for ultra violet (UV). The negative effects of UV including UVB and UVA have been steadily investigated within the last decades. However, little is known about the effects of visible or IR light. In this study, we irradiated human dermal fibroblasts using light emitting diode (LED) to investigate the optimal parameter for enhancing cell growth and collagen synthesis. We found that red of 630 nm and green of 520 nm enhance the cell proliferation, but irradiation with purple and blue light exerts toxic effects. To examine the response of irradiation time and light intensity on the fibroblasts, cells were exposed to red or green light with intensities from 0.05 to $0.75mW/cm^2$. Procollagen secretion was increased of 1.4 fold by 10 min irradiation, while 30 min treatment decreased the collagen synthesis of dermal fibroblasts. Treatment with red of $0.3mW/cm^2$ and green of 0.15 and $0.3mW/cm^2$ resulted in enhancement of collagen mRNA. Lastly, we investigated the combinatorial effect of red and green light on dermal fibroblasts. The sequential irradiation of red and green light is an efficient way for the purpose of the increase in the number of fibroblasts than single light treatment. On the other hand, the exposure of red light alone was more effective method for enhancing of collagen secretion. Our study showed that specific light parameters accelerated cell proliferation, gene expression and collagen secretion on human dermal fibroblasts. In conclusion, we demonstrate that light exposure with specific parameter has beneficial effects on the function of dermal fibroblasts, and suggests the possibility of its cosmetically and clinical application.

• Journal of Life Science
• /
• v.28 no.8
• /
• pp.892-899
• /
• 2018

Portulaca oleracea L. is an edible plant widely consumed in daily diet throughout Europe, Asia and America. In this study, protective effects of P. oleracea L. extracts against oxidative stress and matrix metalloproteinase (MMP) activity induced by ultraviolet B (UVB) radiation were investigated using HaCaT immortal human keratinocytes. In this context, the mRNA and protein productions of MMPs (MMP-1, -2, and -9) and type I procollagen, which are major markers of photoaging induced by UVB radiation in HaCaT keratinocytes, were evaluated. Furthermore, UVB-induced reactive oxygen species (ROS) generation and mRNA and protein expression levels of superoxide dismutase-1 (SOD-1), oxygenase-1 (OH-1), and nuclear factor-erythroid 2-related factor-2 (Nrf-2), all of which are associated with the antioxidant balance, were investigated. As shown by the results, UVB radiation induced ROS formation and led to increased production of MMPs and decreased collagen production in human keratinocytes, which resulted in skin photoaging or photodamage. The treatment with P. oleracea L. extracts downregulated MMP (MMP-1, -2, and -9) production and upregulated type I procollagen expression in UVB-induced HaCaT cells. Furthermore, treatment with the extracts decreased UVB-induced ROS generation and increased the expression of antioxidant enzymes, such as SOD-1 and OH-1, through the Nrf-2 pathway. Taken together, these results suggest that P. oleracea L. extracts could be a potential cosmeceutical agent for the prevention of skin photoaging or photodamage.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.345-346
• /
• 2013

InGaN material is being studied increasingly as a prospective material for solar cells. One of the merits for solar cell applications is that the band gap energy can be engineered from 0.7 eV for InN to 3.4 eV for GaN by varying of indium composition, which covers almost of solar spectrum from UV to IR. It is essential for better cell efficiency to improve not only the crystalline quality of the epitaxial layers but also fabrication of the solar cells. Fabrication includes transparent top electrodes and surface texturing which will improve the carrier extraction. Surface texturing is one of the most employed methods to enhance the extraction efficiency in LED fabrication and can be formed on a p-GaN surface, on an N-face of GaN, and even on an indium tin oxide (ITO) layer. Surface texturing method has also been adopted in InGaN-based solar cells and proved to enhance the efficiency. Since the texturing by direct etching of p-GaN, however, was known to induce the damage and result in degraded electrical properties, texturing has been studied widely on ITO layers. However, it is important to optimize the ITO thickness in Solar Cells applications since the reflectance is fluctuated by ITO thickness variation resulting in reduced light extraction at target wavelength. ITO texturing made by wet etching or dry etching was also revealed to increased series resistance in ITO film. In this work, we report a new way of texturing by deposition of thickness-optimized ITO films on ITO nano dots, which can further reduce the reflectance as well as electrical degradation originated from the ITO etching process.

• Microbiology and Biotechnology Letters
• /
• v.39 no.4
• /
• pp.337-344
• /
• 2011

Integrase MJ1 from the bacteriophage ${\Phi}FC1$ carries out recombination between two DNA sequences (the phage attachment site, attP and the bacterial attachment site, attB) in NIH3T3 mouse cells. In this study, the integration vector containing attP, attB and the integrase gene MJ, was constructed. The integration mediated by integrase MJ1 in Escherichia coli led to excision of LacZ. Therefore, the frequency of integration was measured by the counting of the white colony, which is detectable on X-Gal plates. The extrachromosomal integration in NIH3T3 mouse cells was monitored by the expression of the green fluorescent protein (GFP) as a reporter. To demonstrate integration mediated integrase MJ1 in NIH3T3 cells, vectors containing attP and attB were co-transfected into NIH3T3 cells. The integration was confirmed by fluorescent microscopy. The expression of GFP was induced in NIH3T3 cells expressing MJ1 without accessory factors. By contrast, the excision mediated by the MJ1 between attR and attL had no effect on the expression of GFP. These results suggest that integrase MJ1 may enable a variety of genomic modifications for research and therapeutic purposes in higher living cells.

• Applied Biological Chemistry
• /
• v.51 no.2
• /
• pp.136-141
• /
• 2008

The chromatographic separation of organic solvent extracts of liverwort led to the isolation of six compounds. 2-Chromenone (1), 3, 4-dihydroxy-cinnamic acid (2), 3, 3', 4', 5, 7-pentahydroxy-2-phenylchromen-4-one (3), kaemperol-3-O-${\beta}$-D-glucopyranoside (4), 3-[[3-(3,4-Dihydroxyphenyl)-1-oxo-2-propenyl]oxy]-1, 4, 5-trihydroxycyclohexane carboxylic acid (5) and quercetin-3-O-rutinoside (6) were isolated from the methanolic extracts of the all part of Climacium dendroides. Their structure were established by chemical and spectroscopic methods. All compounds were isolated for the first time from this plant Climacium dendroides.

• Korean Journal of Plant Resources
• /
• v.24 no.5
• /
• pp.499-506
• /
• 2011

The purpose of this study was to search available resources for new natural colorants. The extraction efficiency of colorants from black cowpea seed coats and their storage stability were examined according to the various extraction and storage conditions in this study. The results obtained were as follows: the optical density (O.D.) values of the extracted colorants increased with increasing extract time and temperature. Extraction at pH 4 was seen to be the most efficient among the various pH conditions. The color of the extract solutions were seen to change with variation in pH, for example, anthocyanins display color changes from orange-red, to orange, to blue, to greenish-blue at pH 3.0, 4.0-6.0, 7.0 and 9.0-11.0, respectively. The color changes of the extract solutions over various storage periods were determined using UV/Vis spectra these color changes indicate characteristic absorption patterns and a discoloration index which indicates the rate of absorbance (532 nm/454 nm). Methionine addition influenced the storage stability of the colorant solutions and this addition led to better storage stability than non-addition. In paper chromatography of juice extracted colorant, a long stripe was seen on development. Among three colorants obtained via paper chromatography according to development rate, at least two different colorants were mixed indicated by the appearance, or not, of a shoulder at 552 nm depending on the extent of development.