Acknowledgement
이 논문은 2023년도 부산가톨릭대학교 교내연구비에 의하여 연구되었음.
References
- Scribante, A., Gallo, S., Pascadopoli, M., Canzi, P., Marconi, S., Montasser, M. A., Bressani, D., Properties of CAD/CAM 3D Printing Dental Materials and Their Clinical Applications in Orthodontics: Where Are We Now?, Appl. Sci., 12(2), 551, (2022).
- Stansbury, J. W., Idacavage, M. J., 3D printing with polymers: Challenges among expanding options and opportunities, Dent. Mater., 32(1), 54-64, (2016).
- Lee, J. Y., An, J., Chua, C. K., Fundamentals and applications of 3D printing for novel materials, Appl. Mater. Today., 7, 120-133, (2017). https://doi.org/10.1016/j.apmt.2017.02.004
- Kessler, A., Hickel, R., Reymus, M., 3D Printing in Dentistry-State of the Art, Oper. Dent., 45(1), 30-40, (2020). https://doi.org/10.2341/18-229-L
- Gad, M. M., Fouda, S. M., Factors affecting flexural strength of 3D-printed resins: A systematic review, J. Prosthodont., 96-110, (2023).
- Mayer, J., Reymus, M., Mayinger, F., Edelhoff, D., Hickel, R., Stawarczyk, B., Temporary 3D-Printed Fixed Dental Prosthesis Materials: Impact of Postprinting Cleaning Methods on Degree of Conversion and Surface and Mechanical Properties, Int. J. Prosthodont., 34(6), 784-795, (2021).
- Taormina, G., Sciancalepore, C., Messori, M., Bondioli, F., 3D printing processes for photocurable polymeric materials: technologies, materials, and future trends, J. Appl. Biomater. Funct. Mater., 16(3), 151-160, (2018).
- Quan, H., Zhang, T., Xu, H., Luo, S., Nie, J., Zhu, X., Photo-curing 3D printing technique and its challenges, Bioact. Mater., 5(1), 110-115, (2020). https://doi.org/10.1016/j.bioactmat.2019.12.003
- Bae, J. H., Choi, J. W., Evaluation of Marginal and Internal Gap of Temporary Prosthesis Fabricated by 3D Printing Method According to Rinsing Method and Rinsing Time, KSIC, 26(4), 561-570, (2023).
- Nulty, A., A comparison of trueness and precision of 12 3 D printers used in dentistry, BDJ. open., 8(1), 14, (2022).
- Mayer, J., Stawarczyk, B., Vogt, K., Hickel, R., Edelhoff, D., Reymus, M., Influence of cleaning methods after 3D printing on two-body wear and fracture load of resin-based temporary crown and bridge material, Clin. Oral. Investig., 25, 5987-5996, (2021). https://doi.org/10.1007/s00784-021-03905-9
- Kumar, S., Hofmann, M., Steinmann, B., Foster, E. J., Weder, C., Reinforcement of Stereolithographic Resins for Rapid Prototyping with Cellulose Nanocrystals, ACS. Appl. Mater. Interfaces., 4(10), 5399-5407, (2012). https://doi.org/10.1021/am301321v
- Piedra-Cascon, W., Krishnamurthy, V. R., Att, W., Revilla-Leon, M., 3D printing parameters, supporting structures, slicing, and post-processing procedures of vat-polymerization additive manufacturing technologies: A narrative review, J. Dent., 109, 103630, (2021).
- Bardelcik, A., Yang, S., Alderson, F., Gadsden, A., The effect of wash treatment on the mechanical properties and energy absorption potential of a 3D printed polymethyl methacrylate (PMMA), Mater. Today. Commun., 26, 101728. (2021).
- Reymus, M., Fabritius, R., Kessler, A., Hickel, R., Edelhoff, D., Stawarczyk, B., Fracture load of 3D-printed fixed dental prostheses compared with milled and conventionally fabricated ones: the impact of resin material, build direction, post-curing, and artificial aging-an in vitro study, Clin. Oral. Investig., 24(2), 701-710, (2020).
- Alharbi, N., Osman, R., Wismeijer, D., Effects of build direction on the mechanical properties of 3D-printed complete coverage interim dental restorations, J. Prosthet. Dent., 115(6), 760-767, (2016). https://doi.org/10.1016/j.prosdent.2015.12.002
- Mostafavi, D., Methani, M. M., Piedra-Cascon, W., Zandinejad, A., Revilla-Leon, M., Influence of the Rinsing Postprocessing Procedures on the Manufacturing Accuracy of Vat-Polymerized Dental Model Material, J. Prosthodont., 30(7), 610-616, (2021). https://doi.org/10.1111/jopr.13288
- Scherer, M. D., Husain, N. A. H., Barmak, A. B., Kois, J. C., Ozcan, M., Revilla-Leon, M., Influence of postprocessing rinsing solutions and duration on flexural strength of aged and nonaged additively manufactured interim dental material, J. Prosthet. Dent., Online ahead of print, (2022).
- Jin, G., Gu, H., Jang, M., Bayarsaikhan, E., Lim, J. H., Shim, J. S., Lee, K. W., Kim, J. E., Influence of postwashing process on the elution of residual monomers, degree of conversion, and mechanical properties of a 3D printed crown and bridge materials, Dent. Mater., 38(11), 1812-1825, (2022). https://doi.org/10.1016/j.dental.2022.09.017