• Journal of the Korean Graphic Arts Communication Society
• /
• v.22 no.1
• /
• pp.29-38
• /
• 2004

With increasing interests in environment matters over the world, incessant efforts to develop products which meet these environmental requirements have been made also in paint industry. Among the efforts in this field, UV(Ultra Violet) curing system is focused as one of most potential system. It is because this system not only proved to be environmentally friendly compared with heat curing system or other system but also has economical merit of smaller facility, less energy consumption, and better productivity. Superior properties in many application is surely one of its dominant merit. With these advantage UV system is applied to a variety of industrial fields and expected to have continuous growth in the future. As practical application of UV system has shown lasting progress, R&D on basic material of this system keeps up with. This is a study on photo-initiator that is a fundamental substance in UV curing method and amine, its aid for better effect. After reviewing on them in the aspects of function, economy, and stability, optimal foumula is pursued through experiments when applied to real products.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.04a
• /
• pp.192-195
• /
• 2003

UV curing technology becomes important in various sectors of applications due to the high efficiency, environmental protection and saving energy. Above all, It is necessary to consider the formulation of glass fiber sizes in some detail to achieve this study since they are governed by the products to be made and their performance in the composites made form them. The effect of glass fiber sizes against UV curing system was investigated by the method of changing size formulation. Nanosil 700 was used in order to increase curing efficiency. Yellow effect was not observed at the 1% fiber sizer content.

• Journal of Environmental Science International
• /
• v.27 no.11
• /
• pp.1023-1028
• /
• 2018

Shape memory materials are widely used in high-tech industries. Although shape memory polymers have been developed, they have a disadvantage, only unidirectional resilience. Shape memory polymers with bi-directional recovery resilience have been actively studied. In this study, a bidirectional shape memory polyurethane was synthesized using poly(${\varepsilon}$-caprolactone) diol, methylene dicyclohexyl diisocyanate, and hydroxyethyl acrylate. The first physical curing occurred between hard segments and hydrogen bondings when the solution was dried. The second curing in acrylate groups was performed by UV exposure. A degree of curing was analyzed by infrared spectroscopy. The shape memory properties of 2 step-cured polyurethanes were investigated as a function of UV curing time.

• Journal of Adhesion and Interface
• /
• v.13 no.4
• /
• pp.156-162
• /
• 2012

Polyurethane (PU)/organoclay nanocomposites were prepared by mixing UV curable urethane acrylate oligomer with organoclay, and a subsequent curing by UV irradiation. As organoclays, commercially available Cloisite 20A (C20A) and acrylsilane modified C20A were used. XRD and TEM analyses revealed that the UV cured PU/clay nanocomposites formed intercalated nanocomposites, and acrylsilane modified C20A are dispersed more finely than unmodified C20A in PU matrix. DMTA, pencil hardness and adhesion test onto PET substrate showed that the clay nanolayers induced an increase in the properties, and the enhancement in the properties was more pronounced in the PU/acrylsilane modified C20A nanocomposites than in the PU/unmodified C20A nanocomposites. It was also observed that the PU/surface modified clay nanocomposites showed remarkably lower shrinkage upon UV curing than the unfilled PU. The nanocomposites showed excellent optical transparency but lower gloss as compared to unfilled PU.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.10a
• /
• pp.103-106
• /
• 2003

In this work the novel potential epoxy resins, were synthesized and acrylated. Their structures were confirmed by means of FTIR, $^1H NMR, and^{13}/C NMR$ spectroscopies. Also, we were to note the effect of W curing on functional group changes of VE/UP blend system after UV curing.

• Journal of Sensor Science and Technology
• /
• v.16 no.4
• /
• pp.254-258
• /
• 2007

A novel cure sensor based on the side-polished single mode fiber has been proposed and demonstrated. Two different UV curable epoxies were used to verify the feasibility of the side-polished single mode fiber as a high sensitivity cure sensor. The volume change of the epoxy by UV curing results in a corresponding change of the refractive index. The sensor can be used to monitor the curing process, the refractive index variation and the volume change of epoxy in real time during the UV curing process. In addition, small birefringence of the epoxy film can be detected using the sensor.

• Journal of Adhesion and Interface
• /
• v.16 no.4
• /
• pp.146-151
• /
• 2015

Raw sap of essential oil in Korean Dendropanax lacquer was extracted with ethanol, and which was cured by using ROMP (ring opening metathesis polymerization, one of olefin metathesis). Curing behavior with subsequent film properties were studied and compared with conventional curing (under ambient conditions) and UV photo curing. The compositional changes of major ingredients in the lacquer before and after curing were studied by using GC-MS (gas chromatography mass spectrometry). ROMP-cured coating film showed higher gel contents (40%) as compared to those of conventional (8%) and UV curing (25%). ROMP curing with 2 wt% Grubbs' catalyst at $100^{\circ}C$ completed curing reaction within 2 h, which was much faster than that of conventional curing. The quality of coating film prepared with ROMP was more homogeneous and wrinkle-free as compared with that with UV curing. It was found that major ingredients of sesquiterpenes, such as ${\alpha}$-selinene, ${\beta}$-selinene, and ${\delta}$-cadinene were reacted in ROMP, as well as polyacetylenes.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.8
• /
• pp.24-28
• /
• 2009

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.1050-1053
• /
• 2003

Polymer dispersed liquid crystal mode can be classified into two cases, normally scattering mode (NS) and normally transparent (NT) mode according to an initial state. Electro-optic characteristic NS/NT PDLC mode can be improved by controlling the factors to influence the phase separation. In case of NS PDLC mode, we inspected change of a phase separation as a function of curing temperature for the mixture of E7 and NOA65 with different ratios. When the LC concentration is less than polymer such as LC : NOA65 = 40 : 60wt%, the PDLC cell is influenced strongly by the curing temperature. However, when LC concentration is much less than polymer such as LC : NOA65 : 80 : 20wt%, it is influenced slightly by the curing temperature. In case of NT PDLC mode, we observed change of a phase separation as a function of the ratio of the mixture and UV conditions such as curing temperature, UV intensity The cell made with strong UV intensity and curing temperature of $20^{\circ}C$, in case that the ratio of LC to polymer is 70:30wt%, showed good electro-optic characteristics.

• Polymer(Korea)
• /
• v.39 no.2
• /
• pp.256-260
• /
• 2015

The addition of montmorillonite (MMT) in the UV curable polyurethane diacrylate based resins was investigated to fabricate nanocomposites with improved mechanical properties and water sorption behavior using different photoinitiator systems. As a result, it was observed that 1 wt% of clay loading fairly improved tensile resistance and water uptake behavior. It can be also confirmed that dual photoinitiator system consisted of benzyldimethyl ketal and bisacyl phosphine oxide exhibited enhanced energy absorption band 340~450 nm even with 3 wt% of MMT concentration, which may affect the curing behavior of nanocomposite especially in our UV lamp system.