• Fibers and Polymers
• /
• v.2 no.4
• /
• pp.184-189
• /
• 2001

Continuous photografting/crosslinking of polyethyleneglycol dimethacrylate oligomers onto cotton using a water-soluble benzophenone photoinitiator was investigated. Photografting increased with increasing irradiation dose, oligomer concentration and photoinitiator concentration. Maximum grafting efficiency of DM 400 and 600 were 83% and 79%, respectively. the photografting increased the wrinkle resistance of cotton implying surface crosslinking of cotton. bothsurface crosslinking and bulk crosslinking of cotton were accomplished via dual curing of a mixed formulation containing both a thermally curable component (BTCCA/SHP) and a UV-curable component. The wrinkle resistance of the crosslinked cotton was found to be higher when cured by thermal curing due to the facile post-polymerization of the UV active component. The presence of crosslinks in the dually crosslinked cotton was verified with FT-IR and thermogravimetric analysis.

• Textile Coloration and Finishing
• /
• v.21 no.4
• /
• pp.33-38
• /
• 2009

Poly(vinyl acetate) films containing benzophenone were photocrosslinked by continuous UV irradiation.UV irradiation of PVAc film containing 5% benzophenone induced bulk crosslinking of the polymer indicated by 84.1% of gel fraction after ethyl acetate extraction. The crosslinking was attributed to the recombination of tertiary polymer radicals generated upon UV irradiation, which was enhanced by the hydrogen abstraction of benzophenone. Also the UV irradiation resulted in scission of ester linkage and photooxidation of PVAc surface, which was verified by ATR and zeta potential analysis, implying that the PVAc surface became more polar and hydrophilic. The zeta potential proportionally increased from +4.5mV to -26.8 mV with increasing UV irradiation. Also the surface energy of the PVAc film increased with higher UV irradiation upto 56.5 $mJ/m^2$ by the enhanced Lewis acid/base component with larger contribution of Lewis acid parameter. Accordingly the crosslinked PVAc showed higher thermal stability with increasing UV energy.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.2
• /
• pp.134-140
• /
• 2013

UV curing was introduced via a chemical treatment by adding small amounts of a hexafunctional acrylic monomer and a photoinitiator to improve the mechanical properties of PLA. This study also employed a semi-interpenetrated structured polymer network through the process of UV-curing. The UV curing behaviors were investigated using FTIR-ATR spectroscopy and gel fraction determination. Also, the tensile strength was investigated with different hexafunctional acrylic monomer contents and UV doses. The results showed that the crosslinking of UV-induced chemically treated PLA started at a low content of hexafunctional acrylic monomer, resulting in a significant improvement of the mechanical properties compared to those of neat PLA due to crosslinking.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2009.11a
• /
• pp.15-16
• /
• 2009

Poly(vinyl alcohol) was crosslinked by UV irradiation in the presence of water soluble photoinitiators. The crosslinking of PVA films with 1,2,3,4-Butanetetracarboxylic acid(BTCA) and sodium phosphinate monohydrate(SPM) was also achieved via thermal curing. Different factors in the crosslinking including thermal and radiation methods were studied. Gel fraction of PVA films increased with increasing photoinitiator concentration. The maximum gel fraction on the crosslinking method was reached about 81%. The glass transition and maximum decomposition temperature improved by both thermal and radiation crosslinking.

• Korean Membrane Journal
• /
• v.7 no.1
• /
• pp.19-27
• /
• 2005

PP hollow fiber membrane was hydrophilized by EVOH dip coating followed by low temperature plasma treatment and UV irradiation. EVOH coating attained high water flux without any prewetting but its stability did not guaranteed at high water permeation rate. At high water permeation rate, water flux declined gradually due to swelling and delamination of the EVOH coating layer causing pore blocking effect. However, plasma treatment reduces the swelling, which suppress delamination of the EVOH coating layer from PP support result in relieving the flux decline. Also, UV irradiation helped the crosslinking of the EVOH coating layer to enhance the performance at low water permeation rate. FT-IR and ESCA analyses reveal that EVOH dip coating performed homogeneously through not only membrane surface but also matrix. Thermogram of EVOH film modified plasma treatment and W irradiation show that crosslinking density of EVOH layer increased. Chemical modification by plasma treatment and UV irradiation stabilized the hydrophilic coating layer to increase the critical flux of the submerged membrane.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.45 no.1
• /
• pp.12-16
• /
• 2022

Di-tyrosine photo-crosslinking of silk fibroin (SF) is recently highlighted as a biocompatible hydrogel fabrication process, because this method does not need potentially harmful chemical species. However, the resulting crosslinking density is often insufficient to obtain a mechanically stiff hydrogel unless additional oxygen is provided during the reaction. In this study, we proposed a combinational crosslinking method to form an SF hydrogel via the di-tyrosine photo-crosslinking with riboflavin (photoinitiator) and physical interaction of SF chains. In the UV light-irradiated SF solution, small particles formed and these particles promoted β-sheet formation of SF molecules, resulting in quick gelation. The di-tyrosine photo-crosslinking produced nuclei that might trigger regular assembly of SF molecules in high temperature condition. Conclusively, this process would contribute to a development of biocompatible hydrogel fabrication for biomedical uses of SF hydrogels.

• Polymer(Korea)
• /
• v.39 no.2
• /
• pp.281-286
• /
• 2015

UV-cured acrylic copolymer pressure sensitive adhesive (PSA) having different amounts of crosslinking agents were prepared and adhesion properties were investigated. 0.01 wt% of MMT clay was dispersed in 2-ethylhexyl acrylate (2-EHA)/acrylic acid (AA) monomer mixture containing 0, 0.05, 0.1 and 0.3 wt% 1,6-hexandiol diacrylate (HDDA) for crosslinking. It was investigated that the curing behavior and surface chemistry of PSAs were merely affected by the presence of MMT clays. On the other hand, adhesive properties were influenced by the MMT addition; a cohesive failure was restrained due to improved molecular elasticity even in uncrosslinked acrylic PSAs. However, it was also appeared that combination of 0.3 wt% crosslinking agent and MMT loading might result in the damage of adhesion properties of PSAs possibly due to the lack of chain flexibility. In our studies, it is suggested that the 2-EHA/AA PSAs incorporating 0.01 wt% of MMT and crosslinked with 0.05 wt% of HDDA exhibited the balanced adhesion properties without severe cohesive failure during strip.

• Fibers and Polymers
• /
• v.5 no.3
• /
• pp.234-238
• /
• 2004

Tyrosinase oxidizes the tyrosyl residues in silk fibroin (SF) with oxygen, resulting in the production of ο-quinone residues. Subsequently, the inter-or intramolecular crosslinks are formed by reaction with amino groups in through nonenzymatic process. The measurement of oxygen consumption proved that the tyrosyl residues in SF were mostly oxidized to quinone residues by tyrosinase. The reaction mechanisms were proposed in this study and the crosslinking reaction of ο-quinone residues and the enzymatic oxidation of tyrosyl residues could be confirmed by the measurements of UV, $^1$H-NMR and GFC.

• Journal of Life Science
• /
• v.7 no.3
• /
• pp.161-166
• /
• 1997

HIV-1 Rev protein plays an important role in regulating the expression of viral structural proteins. It allows the nuclear export and accumulation of unspliced and partially spliced viral mRNA in the cytoplasm. The Rev-responsive element RNA, present in the env gene, forms a higly ordered RNA secondary structure and is required for the Rev-mediated mRNA export. For this process to complete factor(s) are strongly suggested. From our experiments of electrophoretic mobility shift, UV-crosslinking and SDS/PAGE, RRE RNA was found to be recognized to several nuclear factors such as 36/37, 56, 41. 76, 150 kD proteins in the order of reactivity. Among them, 36/37 and 56 kD proteins are more reactive upon a brief UV treatment (5 min) and more persistent in the presence of high amount of nonspecific competitor, heparin. Certain nuclear protein9s) seemed to recognize the RRE RNA structure in competition with Rev to gel mobility shift assay.

• Journal of Photoscience
• /
• v.7 no.2
• /
• pp.47-52
• /
• 2000

The copolymmers of N, N-dimethylaminoethyl methacrylate(DAEM) and N-arylmethacrylamide (AMA) were prepared, and their photochemical properties as a negative photoresist were studied by the measurements of insoluble fraction, and by UV and IR absorption spectral changes. These copolymers are soluble in DMF, actone, methanol, of acidic buffer solutions. Solubility of these copolymer films in the vuffer solutions increased with the amount of DAEM units in the copolymer and decreased with the pH value. The insoluble fraction of the copolymer films in the buffer solution of pH 4 of in methanol increased with irradiation time and the amount of AMA units in the copolymer. UV and IR spectral changes indicated that not only photo-crosslinking but also the photo-Fries rearrangement took place upon irradiation with a 254nm UV light.