• 한국전기전자재료학회논문지
• /
• 제29권1호
• /
• pp.35-39
• /
• 2016

In this research, we focused on the improvement of cy3 dye's characteristics for LCD color filter. Solubility and thermal stability are main characteristics of dyes for LCD color filter. We performed experiment to change counter cation of cy3 dyes with alkoxy substituent for these purposes. These cy3 dyes (1b~5b) were prepared through the synthetic procedure of three steps. The synthesized new cy3 dyes were charaterized by using NMR, FT-IR, UV/Vis spectroscopy, and TGA. These cy3 dyes showed purple color and maximum absorption wavelength (${\lambda}_{max}$) in the range of 578~590 nm in UV/Vis spectrum. We confirmed that solubility and thermal stability of cy3 dyes were dependent on the structure of counter cation. Cy3 dyes with alkoxy substituent have good solubility in organic solvents such as dichloromethane, methanol, and acetone. Especially, Cy3 dye with 4-nitrobenzyl counter cation (5b) gave excellent solubility characteristics.

• 한국재료학회지
• /
• 제31권1호
• /
• pp.23-28
• /
• 2021

The purpose of this study is to prepare WO3 nanopowders by high-energy milling in mixture gas (7 % H2+Ar) with various milling times (10, 30, and 60 min). The phase transformation, particle size and light absorption properties of WO3 nanopowders during reduction via high-energy milling are studied. It is found that the particle size of the WO3 decreases from about 30 ㎛ to 20 nm, and the grain size of WO3 decreases rapidly with increasing milling time. Furthermore, the surface of the particles due to the pulverization process is observed to change to an amorphous structure. UV/Vis spectrophotometry shows that WO3 powder with increasing milling times (10, 30, 60 min) effectively extends the light absorption properties to the visible region. WO3 powder changes from yellow to gray and can be seen as a phenomenon in which the progress of the color changes to blue. The characterization of WO3 is performed by high resolution X-ray diffractometry, Field emission scanning electron microscopy, Transmission electron microscopy, UV/Vis spectrophotometry and Particle size analysis.

• 한국물환경학회지
• /
• 제26권4호
• /
• pp.707-712
• /
• 2010

Nitrogen-doped $TiO_2$ particles have been successfully prepared using titanium tetraisopropoxide as the Ti source and urea as the nitrogen source. As-prepared nitrogen-doped $TiO_2$ was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Brunauer-Emmett-Teller method (BET) and ultraviolet-visible light (UV-vis) absorption spectra techniques. Photocatalytic degradation of Methylene Blue (MB) has been carried out in both solar light (UV-vis) and the visible region (${\lambda}=420nm$). Nitrogen-doped $TiO_2$ exhibits higher activity than the commercial $TiO_2$ photocalyst, particularly under visible-light irradiation because bandgap of nitrogen-doped $TiO_2$ becomes remarkably decreased.

• Journal of Pharmaceutical Investigation
• /
• 제24권1호
• /
• pp.29-32
• /
• 1994

In order to improve the sensitivity of the current assay methods of selenium in dried-yeast preparations, atomic absorption spectrophotometry (AAS), high performance liquid chromatography (HPLC) and UV-Vis spectrophotometry were employed. The sample was prepared with the digestion by acid mixture of hydrochloric acid, nitric acid and perchloric acid after elimination of ether-soluble substances. The range of quantitation of selenium was $1.0{\sim}6.0\;{\mu}g/ml$ by UV-Vis spectrophotometry, $5.0{\sim}20.0\;{\mu}g/ml$ by HPLC and $0.03{\sim}0.10\;{\mu}g/ml$ by AAS.

• 통합자연과학논문집
• /
• 제3권4호
• /
• pp.197-201
• /
• 2010

Dihydrotetraphenylgermole has been synthesized from the reduction of dichlorotetraphenylgermole with lithiumaluminiumhydride. UV-Vis absorption and photoluminescence was measured by using UV-Vis and fluorescence spectroscopy. Nanoparticles of dihydrotetraphenylsilole were synthesized from the mixture solution of water and THF. Photoluminescence behavior of organogermanium nanoparticle was investigated at various water fractions. Critical fraction of water to form organogermanium nanoparticles was 60%. Photoluminescence intensity of organogermanium nanoparticle was increased as the concentration of organogermanium nanocolloids increased. Photoluminescence efficiency of organogermanium nanoparticle at 90% water fraction increased about 100 times compared to that of molecular state.

• Bulletin of the Korean Chemical Society
• /
• 제31권4호
• /
• pp.925-928
• /
• 2010

Nitrogen-doped $TiO_2$ ($TiO_2$:N) nano-particles with a pure anatase crystalline structure were successfully synthesized through the hydrolysis of $TiCl_4$ in an ammonia aqueous solution. The samples were characterized using X-ray diffraction (XRD), transmission electron microscopy (TEM), $N_2$-sorption, and UV-vis diffuse reflectance spectra (UV-vis DRS) techniques. The absorption edge of nitrogen-doped $TiO_2$ shifted into the visible wavelength region. The photoelectrochemical (PEC) performances were investigated for the $TiO_2$ mesoporous electrodes doped with different nitrogen concentrations. The $TiO_2$:N electrodes exhibited much higher PEC responses compared to the pure $TiO_2$ electrode because of the significantly enhanced visible-photoresponsibility of the $TiO_2$:N electrodes.

• 대한화학회지
• /
• 제67권4호
• /
• pp.217-221
• /
• 2023

A series of hydrophobic dodecyl-terminated 6th-generation poly(amidoamine) dendrimer (H)-encapsulated cadmium sulfide ((CdS)_n@H) nanoparticles in a co-solvent (toluene: methanol = 6.8: 3.2 v/v) are synthesized. The diameters of CdS nanoparticles within the dendrimer were estimated by analyzing the positions of the first excitonic absorption peaks of CdS in UV-vis spectra. The size of the CdS nanoparticle within the dendrimer shows a saturation value as the CdS/H ratio (n) increases, which is believed to be due to the limited physical size of the void cavity within the dendrimer. This simple and convenient method of estimating the saturation of the size of CdS in dendrimers may be useful in determining the maximum void space within other dendrimers under various solvent conditions.

• Bulletin of the Korean Chemical Society
• /
• 제34권9호
• /
• pp.2787-2794
• /
• 2013

Cholesterol and cholesterol oxidation products (COPs) may accumulate in foods of animal origin during processing or storage. An effective and sensitive analytical method was developed by increasing the UV absorption of compounds through derivatization by attaching a chromophore to the functional groups of cholesterols (cholesterol, 20-hydroxycholesterol, 7-ketocholesterol, cholestane-$3{\beta}$-$5{\alpha}$-$6{\beta}$-triol, 25-hydroxycholesterol, and $5,6{\alpha}$-epoxycholesterol). The influences of the reaction time, volume of reaction solvent, amounts of derivatizing reagent, and extraction solvents were investigated, as they may influence the reaction and extraction yield. The derivatized COPs were analyzed simultaneously on a C18 column (2.1 mm i.d. ${\times}$ 100 mm length, $3.5{\mu}m$ particle size) using a gradient elution with water and acetonitrile. The derivatized COPs showed increased sensitivity and selectivity in HPLC/UV-Vis. The LOD and LOQ were in the concentration ranges of 0.018-0.55 mg/kg and 0.059-1.84 mg/kg from the powdered milk. And the accuracy and precision were 78.1-116.7% and 1.1-9.9%, respectively.

• 방사성폐기물학회지
• /
• 제4권1호
• /
• pp.1-7
• /
• 2006

염산매질에서 산화/환원제를 사용하여 Pu 산화수를 조절한 후, UV-Visible-Near IR 분광기를 이용하여 Pu(III, IV, V, VI) 산화수에 대한 흡수스펙트럼을 측정하여 그 분광학적 특성을 고찰하였다. Pu(III)으로 조절하기 위하여 환원제인 $NH_2OH$ HCl를 사용하였으며, Pu(IV)와 Pu(VI)로 조절하기 위하여 산화제인 $NaNO_2$ 및 $HClO_4$를 각각 사용하였다. 또한 Pu(VI)로 조절된 용액에 환원제인 $NH_2OH$ HCl를 사용하여 Pu(V)로 조절하였다. Pu(III)와 Pu(IV)의 대표적인 흡수피크는 470 nm 및 600 nm에서 각각 관찰되었고, Pu(VI)와 Pu(V)의 특성피크는 830 nm 및 1135nm에서 각각 관찰되었다. Pu(III, IV, VI) 산화상태의 시간 경과에 따른 흡수스펙트럼 변화는 관찰되지 않았으나 Pu(V)의 경우 매우 불안정하여 생성되자 마자 Pu(III)로 변화되었다.

• 대한화장품학회지
• /
• 제37권2호
• /
• pp.137-141
• /
• 2011

자외선 차단제는 자외선의 흡수 기능을 갖는 유기 계열과 반사 기능을 갖는 무기계로 구분된다. 이들은 SPF지수로 평가되는데 in-vivo 실험은 높은 비용과 시간이 오래 걸리는 단점이 있어 in-vitro 평가가 연구에 많이 이용된다. 하지만 in-vitro 평가로 사용되는 SPF 평가 장치는 재현성이 매우 낮아 값에 대한 신뢰가 매우 어렵다. 또한, UV-vis spectrometer를 이용한 분석은 재현성은 높지만 투과/흡수/반사의 구분된 결과를 구하기 어려운 단점이 있다. 본 연구에서 제시하는 elipsometer는 높은 재현성과 투과/흡수/반사의 구분된 결과, 다양한 각도에서의 평가의 장점이 있어 자외선 차단제 평가에 매우 유용하다. 이를 위해 상업용 자외선 차단제를 다양한 방법으로 평가하여 elipsometer를 이용한 방법의 타당성을 알아보았다.