• Fashion & Textile Research Journal
• /
• v.18 no.6
• /
• pp.869-877
• /
• 2016

This study looks into the dyeing properties and functionality of cotton fabrics dyed in both the Spirodela polyrhiza extract and the extract resulting from the mixture of Salvia plebeia R. Br. and Spirodela polyrhiza. Since the UV-Vis Spectrum of the methanol extract of Spirodela polyrhiza shows absorption peaks at 256, 268nm, and 345nm, it can be inferred that the compound that Spirodela polyrhiza contains is a flavonoid. In addition, it can also be presumed that, by analyzing the infrared absorption spectrum of Spirodela polyrhiza, the plant contains flavonoid compounds, just like Salvia plebeia R. Br.. The UV protection factors of the cotton fabrics dyed in both the Spirodela polyrhiza extract and the extract from the mixture of Salvia plebeia R. Br. and Spirodela polyrhiza were 50+, presenting outstanding UV protection factors. The deodorization rate of the cotton dyed in the Spirodela polyrhiza extract was between 30 and 120 minutes, and the rate rose from 92% to 97% as time passed. The deodorization rate of the cotton dyed in the extract from the mixture of Salvia plebeia R. Br. and Spirodela polyrhiza increased from 88% to more than 91%. The result also revealed that overall the fastness of color, including color fastness to washing related to change in color, as well as the color fastness to light of the fabric dyed in the extract from the mixture of the two plants improved, compared to the cloth dyed only in Spirodela polyrhiza extract. Furthermore, the antibacterial activity was also strengthened.

• Korean Journal of Materials Research
• /
• v.27 no.9
• /
• pp.489-494
• /
• 2017

ZnS powder was synthesized using a relatively facile and convenient glycothermal method at various reaction temperatures. ZnS was successfully synthesized at temperatures as low as $125^{\circ}C$ using zinc acetate and thiourea as raw materials, and diethylene glycol as the solvent. No mineralizers or precipitation processes were used in the fabrication, which suggests that the spherical ZnS powders were directly prepared in the glycothermal method. The phase composition, morphology, and optical properties of the prepared ZnS powders were characterized using XRD, FE-SEM, and UV-vis measurements. The prepared ZnS powders had a zinc blende structure and showed average primary particles with diameters of approximately 20~30 nm, calculated from the XRD peak width. All of the powders consisted of aggregated secondary powders with spherical morphology and a size of approximately $0.1{\sim}0.5{\mu}m$; these powders contained many small primary nanopowders. The as-prepared ZnS exhibited strong photo absorption in the UV region, and a red-shift in the optical absorption spectra due to the improvement in powder size and crystallinity with increasing reaction temperature. The effects of the reaction temperature on the photocatalytic properties of the ZnS powders were investigated. The photocatalytic properties of the as-synthesized ZnS powders were evaluated according to the removal degree of methyl orange (MO) under UV irradiation (${\lambda}=365nm$). It was found that the ZnS powder prepared at above $175^{\circ}C$ exhibited the highest photocatalytic degradation, with nearly 95 % of MO decomposed through the mediation of photo-generated hydroxyl radicals after irradiation for 60 min. These results suggest that the ZnS powders could potentially be applicable as photocatalysts for the efficient degradation of organic pollutants.

• Economic and Environmental Geology
• /
• v.26 no.1
• /
• pp.107-114
• /
• 1993

For the blue sapphires from Santung, China, the color change before and after has been investigated by UV-Visible spectrophotometry method. The blue sapphires from Shantung show four groups of absorption bands: the bands A (374, 386 and 450 nm) being attributed to single $Fe^{3+}$ ion, the band B (560, 579 and $704n{\breve{m}}$) to $Fe^{2+}$/$Ti^{4+}$ pairs, the band C (-800 nm) to $Fe^{2+}$/$Fe^{3+}$ pairs, and the D (528 nm) to $Ti^{3+}$ dd transitions. From those UV-VIS characteristics the origin of blue color of the sapphires is confirmed to be attributed by the factors such as $Fe^{2+}$/$Fe^{3+}$ and $Ti^{3+}$/$Ti^{4+}$. The absorption spectra of natural blue sapphires before and after heat treatment show distintive features, comparing with those of sapphires from other localities: the bands of 689 nm and of $Cr^{3+}$ are not recorded on the spectra of sapphires from Shantung. The band (492 nm), which resulted from $Ti^{3+}$, is not shown and the intensity of the band 528 nm decreases after the heat treatment. Decoloration of ink-blue sapphires are found to be successful by heat treatment with the control of annealing and atmosphere. During the diffusion process the excess components of impurities contained originally in the host crystal were expelled to the surface of crystals, enhancing the transparency of the crystals noticeably.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.441-442
• /
• 2012

SnNb2O6 nanoplates were prepared by a solvothermal synthesis with water and ethanol mixed solvent. For improvement of their properties, as-prepared SnNb2O6 nanoplates also were calcined. The prepared powder was characterized by X-ray diffraction (XRD), field emission scanning electron microscope (FESEM), Transmission electron microscope (TEM), UV-vis spectroscopy, Raman spectrometer, Brunauer-Emmett-Teller (BET). The calcined nanoplates have a smaller surface area than the as-prepared nanoplates have. Nevertheless, in the case of the optical absorption properties, the calcined nanoplates could absorb more photon energy, due to their smaller band gaps. The Raman analysis revealed that the Nb-O bond length in the calcined nanoplates was longer than that in the as-prepared nanoplate. The higher optical absorption capability of the calcined nanoplates was attributed to the local structure variation within them. Furthermore the high crystallinity of the calcined nanoplates is effective in improving the generation of charge carriers. So, It was found that the calcined nanoplates exhibited superior photocatalytic activity for the evolution of H2 from an aqueous methanol solution than the as-prepared nanoplates under UV and visible irradiation. Therefore, the enhanced photocatalytic activity of the calcined nanoplate powder for H2 evolution was mainly attributed to its high crystallinity and improved optical absorption property resulting from the variation of the crystal structure.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.14 no.2
• /
• pp.73-77
• /
• 2004

The color enhancement for natural Zambian amethyst of low quality was carried out by the hydrothermal treatment method. The hydrothermal treatment conditions were as follows: reaction temperature; $300^{\circ}C$, duration; 30 hrs, filling; 40%, solvent; 6 M-HCI solution. The reddish purple amethyst of high quality was obtained under these conditions. From the result of ICP/AES, it was known that color enhancement was affected by a Fe elemental content to exist in the inside of natural Zambian amethyst. Also, from the result of UY-VIS-NIR, it was shown that the absorption peak at 550 nm after hydrothermal treatment is slightly lower than those of non-treated natural Zambian amethyst. In this study, it was known that hydrothermal treatment method was a way to suitable for increase of commercial value of natural Zambian amethyst.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.17 no.1
• /
• pp.35-40
• /
• 2007

Cobalt ($Co^{2+}$) doped yttria stabilized cubic zirconia (YSZ, $Y_2O_3\;:\;25{\sim}50wt%$) single crystals grown by a skull melting method were heat-treated in $N_2\;at\;1000^{\circ}C$ for 5 hrs. The reddish brown single crystals were changed into either violet or blue color, respectively. Before and after heat treatment, the Co-doped YSZ crystals cut for wafers (${\phi}6.5{\times}t\;2mm$) and round brilliant (${\phi}10mm$). The optical and structural properties were examined by UV-VIS spectrophotometer and XRD. These results are analyzed absorption by $Co^{2+}\;(^4A_2(^4F)\to{^4P})\;and\;Co^{3+}$, change of energy gap and lattice parameter.

• Journal of the Korean Chemical Society
• /
• v.61 no.4
• /
• pp.191-196
• /
• 2017

One-phase method to prevent the initial formation of Ag(I) thiolate layered materal from the mixture of $AgNO_3$ and thiols was previously developed to generate TP (Thiolate-Protected)-nanosilver. In this modified method, $AgNO_3$ is added to the mixtures of $NaBH_4$ and thiols in ethanol. This method was so successful that it was applied to synthesize TP-nanogold and nanoplatinum. The synthesis and characterization of these nanoparticles by ultraviolet-visible (UV-vis) absorption spectra, transmission electron microscopy (TEM) pictures, X-ray powder differaction (XRD) patterns and infrared(IR) spectra are described. The results show that colloidal nanoparticles are spherical or oval shape and the mean sizes for TP-nanogold and nanoplatinum are about 3~7 nm and below 2 nm, respectively. The conformation of polymethylene [$-(CH_2)_7-$] sequence in octanethiolate attached to nanogold was elucidated as trans.

• Journal of the Korean Chemical Society
• /
• v.50 no.6
• /
• pp.440-446
• /
• 2006

ZnO nanoparticles were prepared by laser ablation of the ZnO powder dispersed in deionized water and surfactant solutions, and characterized using UV-VIS absorption spectroscopy, X-ray diffractometer and Transmission electron microscopy(TEM). ZnO nanoparticles produced show the pure ZnO crystal state without mixed state with Zn(OH)2 or Zn, and have the band gap energy of 3.35 eV, which is comparable to that of bulk ZnO. While ZnO nanoparticles prepared in SDS solution have the average diameter of 28nm with near spherical shape, those prepared in CTAB solution have the average size of 40 nm with mainly rod-like shape. ZnO colloidal solution of CTAB is more stable than that of SDS. These difference according to surfactants can be explained by difference of electrostatic interaction between surface charge of ZnO and surfactant molecules and by solvation effect in solution.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.36-36
• /
• 2011

We synthesized new dye sensor based on indole compound. Through the UV-vis absorptions, we analyzed chemosensing properties to explain metal binding properties. The peak absorptions increased at 472 nm when added metal cations($Cd^{2+}$, $Cu^{2+}$, $Hg^{2+}$, $Fe^{2+}$, $Zn^{2+}$, $Ni^{2+}$ and $Cr^{3+}$) and gradually decreased the peak at 516 nm. Thus, this UV-Vis absorption behavior clearly showed the metal binding reaction. To measure energy level of used dye sensor, HOMO/LUMO energy value was calculated with cyclovaltagramm(CV) and using computational calculation method, in which we estimated the optimum structure of dye sensor. CV and computational calculation method, both compared to find suitable geometric structure. (with almost same energy values.) From the computational calculation, dye sensor has plane structure. So, Amine and ketone in the dye sensor faced each other and makes position to bind metal cations. In addition, these positions was supported pull-push electron system and generated MLCT process, when the dye sensor was bonded with the metal cations and resulted chemosensing properties. Through the electrochemical and computational calculation method analyze, we proposed the chemosensing principles that the dye sensor bind the metal cation between ketone and amine. Finally, the formation type of metal ion bindings was determined by Job's plot measurements.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.225-225
• /
• 2013

Nanostructured noble metals have been attractive for their unusual optical properties and are widely utilized for various purposes. The optical properties mainly originating from collective electron oscillation can assist direct energy conversion via surface plasmon resonances. Here, we investigated the effect of surface plasmons of silver nanowires on the generation of hot electrons. It is reported that the surface plasmons of silver nanowires exhibit longitudinal and transverse modes, depending on the aspect ratio of the nanowires. In order to measure the hot electron flow through the metallic nanowires, chemically modified Au/TiO2 Schottky diodes were employed as the electric contact. The silver nanowires were deposited on a Au metal layer via the spray method to control uniformity and the amount of silver nanowire deposited. We measured the hot electron flow generated by photon absorption on the silver nanowires deposited on the Au/TiO2 Schottky diodes. The incident photon-to-current efficiency was measured a function of the photon energy, revealing two polarization modes of siliver nanowires: transverse and longitudinal modes. UV-Vis spectra exhibited two polarization modes, which are also consistent with the photocurrent measurements. Good correlation between the IPCE and UV-vis measurements suggests that hot electron measurement on nanowires on nanodiodes is a useful way to reveal the intrinsic properties of surface plasmons of nanowires.