• 접착 및 계면
• /
• 제9권2호
• /
• pp.32-37
• /
• 2008

광개시제 함량이 0.5 wt%, 1 wt%, 2 wt%인 UV 경화형 분체도료를 배합하고 낮은 온도에서도 용융되는 수지를 선택하여 열민감성 기재에 적용이 가능함을 알아보았다. 열민감성 기재로는 PVC와 목재제품(MDF, 합판 등)을 선택하여 표면경도, 광택, 부착력을 통해서 기재와의 상관관계를 알아보았다. 광개시제 양이 증가할수록 가교밀도가 증가하여 도막이 brittle해지는 경향을 보였고, 그에 따라 부착력이 감소하였다. 열민감성 기재에 적용한 결과, 표면경도는 기재에 영향을 받지 않았지만 광택은 기재에 따라서 차이가 나타났다. 그리고 UV 경화형 분체도료의 부착력은 열민감성 기재에 적용하기에 충분하였다. 본 연구 결과, UV 경화형 분체도료에서 광개시제 함량이 중요한 인자이며 열민감성 기재에 적용이 가능함을 확인하였다.

• 한국인쇄학회지
• /
• 제16권3호
• /
• pp.61-80
• /
• 1998

To investigate in influence of photosensitizer used with benzophenone(BP) in the curing rate and physical properties of UV curable hard coating on plastic, we prepared UV curable clear and pigmented coatings with DEA, DMA, NPM and TEA as photosensitizer, respectively. The curing rate calculated from the decrease of the absorbance of acrylic double bond measured by FT-IR spectroscopy increased s follows; DEA>DMA>NPM>TEA. this order could be explained by the reactivity of diethylamino group of DEA and the ease of formation of activated complex between BP and photosensitizer during the curing process. In UV curable pigmented coatings, the order of curing rate increased as follows; DEA>DMA>TEA>NPM. It was found that the curing rate of the pigmented coating can be increased by light scattering of TiO$_2$. The hardness of coating film cured by photosensitization of DEA and DMA is higher than other photosensitizers due to the crosslinking reaction of DEA and DMA radical bound to polymer backbone.

• Journal of the Korean Wood Science and Technology
• /
• 제32권6호
• /
• pp.23-35
• /
• 2004

The goal of study was to investigate the influence of the acrylated urethane oligomer on mechanical properties, the chemical resistance and thermal resistance of the UV curable urethane acrylate coatings for fancy veneer overlayed plywood flooring. The pencil hardness and abrasion resistance of the coated fancy veneer overlayed plywood floorings increased with increasing the acrylate functionality of the acrylated urethane oligomer. In the case of the UV cured film containing hexa-functional acrylated aliphatic urethane oligomer, high discoloration of the coated fancy veneer overlayed plywood flooring was observed near the cracks at the beginning of the chemical treatment. In this study, it was found that the degradation of the UV cured film caused by an alkaline reagent was higher than that of the UV cured film caused by an acidic treatment.

• 한국인쇄학회지
• /
• 제15권2호
• /
• pp.107-115
• /
• 1997

The ultraviolet(UV)-curable materials are widely used in inks and coatings. In this paper is designed to develop materials having flexibility and functionality with UV-curable acrylate monomer and alkyd resin. At first, phase diagram is prepared for miscibility of UV -curable acrylate monomer with alkyd resin. Also the gel fraction and dynamic viscosity are measured to curing speed of mixing system. In results, it has been demonstrated that miscibility and curing speed are greatly influenced by alkyd resin content.

• 한국응용과학기술학회지
• /
• 제28권2호
• /
• pp.240-246
• /
• 2011

UV-Curable hybrid coatings were synthesized to improve the surface properties of plastic film. Organic-inorganic coating solutions were prepared by the sol-gel method using urethane-acrylate oligomer, acrylate monomer, photo initiator and tetraethoxysilane (TEOS). Methacryloyloxypropyltrimethoxysilane(MPTMS) was used as a silane coupling agent to improve chemical interaction between inorganic phases and UV curable acrylate. In this study, the surface hardness and adhesive properties were improved with the use of inorganic component. The experimental results showed that UV-Curable hybrid films containing aliphatic urethane oligomer, hexanedioldiacrylate, trimethylolpropanetriacrylate, hydroxy dimethyl acetophenone exhibited good surface properties. Also, the optimum curing conditions were investigated.

• Journal of the Korean Wood Science and Technology
• /
• 제36권6호
• /
• pp.121-129
• /
• 2008

고경도, 고광택, 고내마모성 및 고내산성 등의 물성이 요구되는 마루바닥재의 상도용 도료로는 물성이 우수하면서도 환경친화적인 자외선경화형 도료가 많이 사용되고 있다. 그 중에서도 특히 에폭시 아크릴레이트계의 올리고머는 높은 열안정성과 속경화 특성으로 인하여 목재내장재의 도료로써 많이 사용되고 있다. 본 연구에서는 아크릴레이트 관능기 수가 자외선 경화형 에폭시 아크릴레이트 도료의 열안정성 및 표면경도에 미치는 영향을 분석하고자 하였다. 조성분을 이루는 모노머, 올리고머, 광개시제 각각의 열분해 거동 및 아크릴레이트 관능기수가 달리 배합된 에폭시 아크릴레이트 도료의 열안정성을 열중량분석기(TGA)를 사용하여 평가하였으며, 열안정성과 물리적 물성과의 관계를 확인하기 위하여 진자경도계를 이용하여 표면경도를 측정하였다. 경화 전 후의 열분해 거동 및 표면경도를 비교한 결과, 자외선 경화 중에 발생하는 가교에 의해 도막의 열안정성이 부여되며, 관능기의 수가 많아짐에 따라 열안정성뿐만 아니라 표면경도도 향상됨을 확인하였다.

• 청정기술
• /
• 제23권2호
• /
• pp.148-157
• /
• 2017

To prepare UV-curable polyurethane-acrylate oligomer, NCO-terminated urethane prepolymers with trimethylolpropane, [TMP; 0 (0), 0.1 (0.021) and 0.2 (0.043) mole (mole fraction)] as crosslinkable tri-functional chain extender were end-capped with pentaerythritol triacrylate [PETA; 2.0 (0.400), 1.7 (0.354) and 1.4 (0.304) mole (mole fraction)] with one hydroxyl group/three vinyl functionalities. The stable as-formulated UV-curable polyurethane-acrylates [stable mixtures of PETA-capped oligomer/reactive acrylic monomer diluents without/with heptadecafluorodecyl methacrylate (PFA; 0, 6 and 9 wt%)] were formed up to 0.2 (0.043) mole (mole fraction) of TMP content in the prepolymer, while homogeneous-mixing failed at 0.3 (0.068) mole (mole fraction), in which the crosslink density in NCO-terminated urethane prepolymer was too high to enable the formation of stable mixture. This study examined the effect of TMP/PETA molar ratio and heptadecafluorodecyl methacrylate (PFA) content (wt%) on the properties of UV-cured polyurethane-acrylates as marine antifouling coating materials. The properties of UV-cured polyurethane-acrylate were found to be significantly dependent on the crosslinkable TMP/PETA ratio and PFA content. With the increasing of the TMP and PFA contents, the contact angles increased, and consequently the surface tension decreased. The adhesion of algae/barnacles to PFA contained film samples were found to be sufficiently weak to allow their easy removal. These results suggest that the UV-cured samples containing PFA have strong potential as coating materials for antifouling applications.

• Macromolecular Research
• /
• 제16권2호
• /
• pp.128-133
• /
• 2008

Several dual-curable acrylic pressure-sensitive adhesives (PSA) were synthesized by the radical polymerization of acrylic monomers containing benzophenone, hydroxyl, and alkyl groups. The optimum extent of UV-induced cure was determined by varying the content of the benzophenone groups (the photoinitiator) from 0.5 to 1.5 wt%. The weight average molecular weight of the polymers obtained ranged from 300,000 to 700,000 amu. The coated pressure-sensitive adhesives were cured either by short UV exposure to induce the grafting of acrylic polymers, or by heating for 6 hat $60^{\circ}C$ to promote the reactions between the polyisocyanates and hydroxyl groups. The dual-curing behavior was determined by monitoring both processes quantitatively by infrared spectroscopy. The developed dual-curable acrylic pressure-sensitive adhesives were found to compensate for the limitations in UV-induced curing of thick coatings.

• 공업화학
• /
• 제16권3호
• /
• pp.449-455
• /
• 2005

분자 내에 방무기능을 부여하기 위한 수산기와 전자선(EB) 및 자외선(UV) 경화가 가능한 아크릴레이트 관능기를 갖는 1관능성 및 4관능성 방무제 AF-1과 AF-2를 합성하여 EB 및 UV 경화시스템에 적용하였다. 합성된 AF-1과 AF-2를 UV 경화시스템에 적용하여 도막의 방무특성 및 경화물성을 측정한 결과, AF-1과 AF-2 함량을 5:17.5의 비로 함유한 배합이 표면과 내부경도, 내화학성 및 접착력이 저하되지 않으면서 김서림 방지 특성이 우수한 최적배합임을 알 수 있었다. 이 최적배합을 EB 경화시스템에 적용하였고, EB 및 UV 두 시스템에 의해 이루어진 코팅배합물을 PC sheet에 코팅하여 도막의 방무특성 및 경화물성을 비교 연구하였다. 그 결과 EB 및 UV에 의해 경화된 두 시스템 모두 우수한 방무특성을 나타냈으나 EB 시스템이 UV 시스템보다 더우수한 내부경도, 접착력 및 젖음성을 나타냄을 확인하였다.

• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 2020년도 정기학술대회 발표논문집
• /
• pp.226-226
• /
• 2020