• 접착 및 계면
• /
• 제14권4호
• /
• pp.167-174
• /
• 2013

본 연구에서는 ink binder용으로 isophorone diisocyanate (IPDI)/polyether polyol/2-hydroxyethyl acrylate (HEA)계 UV 경화형 우레탄 아크릴레이트를 중합하였다. HEA/PETA 혼합 비율을 달리한 조성물의 UV 조사 시간에 따른 광경화거동을 FT-IR spectrophotometer, probe tack tester 및 Photo-DSC로 확인하였다. UV 조사 시간이 증가함에 따라 전환률 및 gel content는 증가하였으며 probe tack은 감소하였다. 반응성 희석제로 사용한 PETA 함량이 증가함에 따라 저장탄성률, 인장강도 및 초기분해 온도가 증가하였다. HEA/PETA 비율이 30/70인 경우 UV 경화 후 PMMA sheet에 대한 부착특성이 가장 우수하였다.

• 한국인쇄학회지
• /
• 제18권1호
• /
• pp.59-69
• /
• 2000

The characteristics of liquid crystal polymer composite(LCPC) films are possessed of large-area and flexible display, polarizer free, high contrast, wide angle of visual filed and high responsiveness. It is well known that the LCPC films consisting of a continuous LC phase embeded in a three-dimentional network of polymer matrix are formed by photopolymerization-induced phase separation. In this study, we have investigated the point that both liquid crystals and polymer having different properties have to coexiste as composed films. The purpose of this study has been the development of new application with liquid crystals and UV-curable monomers. In the results abtained on the miscibility of nematic liquid crystal and UV-curable resins, difunctional monomer HX-620 turned out to shows the best. From the results abtained on structures, electro-optical properties and dynamic visocoelasticity for LCPC films, the best mixing ratio of monomer to LC mixture were 3/7(photoinitiator; 4wt%) by weight, and this ratio has been provided the most thermal stability for LCPC films. In the results abtained on structure and discoloration properties of LCPC films, it has been demonstrated that consiste of a 8:2 mixture of chiral nematic liquid crystal and HX-620 has the greatest domain and it was the best discoloration.

• 접착 및 계면
• /
• 제18권4호
• /
• pp.159-165
• /
• 2017

본 연구에서는 반응성 희석제로 사용되는 BA의 함량에 따른 자외선 경화형 폴리우레탄 아크릴레이트 수지를 제조하여 수지의 열적 기계적 성질, 접착강도, 굴곡성을 확인하였다. BA의 함량이 40% 이상으로 증가할수록 Polyol의 Tg와 아크릴 수지의 Tg가 분리되어 나타난 것을 DSC로 통해 확인하였다. 또한 BA의 함량이 증가할수록 아크릴 수지의 낮은 기계적인 물성이 주도적으로 발현되어 인장강도와 신장률, 접착강도가 감소하는 것으로 나타났다. 굴곡성을 평가한 결과 BA의 함량이 40%인 경우 경도가 낮으면서 다른 수지에 비해 Tm이 낮아 굴곡성이 우수한 것으로 나타났다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.159-162
• /
• 2009

A liquid crystalline monomer is applicable to fabricate a retarder in which various types of alignment are fixed. We have developed the monomer, UV-curable liquid crystal optimized for coating processes. Applications and materials for the retarder are reviewed.

• 공업화학
• /
• 제31권2호
• /
• pp.230-236
• /
• 2020

본 연구에서는 모바일 기기용 방수 및 내충격 기능성 소재로 사용되는 우레탄-아크릴레이트 점착테이프의 부착력 향상 연구를 수행하였다. 소수성 표면을 가진 기재(substrate) 필름과 아크릴 점착제 사이의 젖음성 및 밀착력 하락으로 인한 점착테이프의 물성 저하를 개선하기 위해, 에폭시 작용기를 가진 실란 커플링제인 3-glycidoxy-propyl trimethoxysilane (GPTMS)을 UV 경화형 우레탄-아크릴레이트 수지에 함량별로 첨가하여 필름을 제조하였다. FT-IR, EDS, XPS를 이용하여 실란 커플링제의 함량에 따른 기재 필름의 표면 결합 특성을 확인하였고, 인장강도, 접촉각, 겔 분율(gel fraction)을 측정하여 기계적 물성 변화를 비교하였다. 또한 우레탄-아크릴레이트 필름의 양쪽에 아크릴 점착제를 코팅하여 양면 점착테이프를 제조하고, 180, 90° 박리강도(peel strength)를 측정하여 실란 커플링제 함량별로 기재 필름과 점착제 사이의 접착력(밀착력)을 비교하였다. 실란 커플링제 함량이 증가할수록 기재필름의 다양한 물성의 변화를 보였지만, 0.5~1 wt% 정도의 첨가는 기타 물성의 손실 없이 효과적으로 점착층과의 계면 부착력을 향상시켰다.

• Tribology and Lubricants
• /
• 제36권5호
• /
• pp.267-273
• /
• 2020

This study experimentally investigates hydrophobic surfaces fabricated via additive manufacturing. Additive manufacturing, commonly known as 3D printing, is the process of joining materials to fabricate parts from 3D model data, usually in a layer-upon-layer manner. Digital light processing is used to fabricate hydrophobic surfaces in this study. This method uses photo-curable resins and ultraviolet (UV) sources. Moreover, this technique generally has faster shaping speeds and is advantageous for the fabrication of small components because it enables the fabrication of one layer at a time. Two photo-curable resins with different compositions are used to fabricate micro-patterns of hydrophobic surfaces. The resins are composed of a photo-initiator, monomer, and oligomer. Experiments are conducted to determine suitable process conditions for the fabrication of hydrophobic surfaces depending on the type of resin. The most important factors affecting the process conditions are the UV exposure time and slice thickness. The fabrication capability according to the process conditions is evaluated using the side and top views of the micro-patterns observed using a microscope. The micro-patterns are collapsed and intertwined when the exposure time is short because sufficient light (heat) is not applied to cure the photo-curable resin with a given slice thickness. On the other hand, the micro-patterns are attached to each other when the exposure time is prolonged because the over-curing time can cure the periphery of a given shape. When the slice is thicker, the additional curing area is enlarged in each slice owing to the straightness of UV light, and the slice surface becomes rough.

• 한국인쇄학회지
• /
• 제25권1호
• /
• pp.95-107
• /
• 2007

This study starts to find a way out, experiment and apply commercial UV coatings to the cap closures. The cap closures is made form coating and succeeding deformation process. It is coated with several printing layers, printing and over print varnish coating. Then it pressed in three steps of press called 'deep-drawing'. In this study, two kinds of coating was designed and accomplished in the base of the same manufacturing and environment conditions. Consequently, UV curable ink have adequate performance in this experiment (T-bending, Erichsen Test), but it were experienced several damages in this experiments (web-bending, impact test). They were not cured enough to endure the friction and a unique shape of serial cracks were appeared.

• Fibers and Polymers
• /
• 제2권4호
• /
• pp.184-189
• /
• 2001

Continuous photografting/crosslinking of polyethyleneglycol dimethacrylate oligomers onto cotton using a water-soluble benzophenone photoinitiator was investigated. Photografting increased with increasing irradiation dose, oligomer concentration and photoinitiator concentration. Maximum grafting efficiency of DM 400 and 600 were 83% and 79%, respectively. the photografting increased the wrinkle resistance of cotton implying surface crosslinking of cotton. bothsurface crosslinking and bulk crosslinking of cotton were accomplished via dual curing of a mixed formulation containing both a thermally curable component (BTCCA/SHP) and a UV-curable component. The wrinkle resistance of the crosslinked cotton was found to be higher when cured by thermal curing due to the facile post-polymerization of the UV active component. The presence of crosslinks in the dually crosslinked cotton was verified with FT-IR and thermogravimetric analysis.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.551-552
• /
• 2007

Coating films were prepared from silane-terminated Colloidal silaca(CS) and UV-curable acrylate resin. The silane-terminated CSs were synthesized from CS and methyltrimethoxysilane(MTMS) and then treated with 3-methacryloxypropyltrimethoxysilane(MAPTMS)/3-glycidoxypropyltrimethoxysilane( GPTMS)/vinyltrimethoxysilane(VTMS) by sol-gel process, respectively. The silane-terminated CS and acrylate resin were hybridized using UV-curing system. Thin films of hybrid material were prepared using spin coater on the glass. Their hardness, contact angle and transmittance improved with the addition of silane-terminated CS.

• 한국인쇄학회:학술대회논문집
• /
• 한국인쇄학회 2000년도 춘계 학술발표회 논문집
• /
• pp.56-60
• /
• 2000