• 한국정밀공학회지
• /
• 제22권1호
• /
• pp.199-206
• /
• 2005

Mask manufacturing is a high COC and COO process in developing of semiconductor devices because of mask production tool with high resolution. Direct writing has been thought to be the one of the patterning method to cope with development or small-lot production of the device. This study consists two categories. One is the additional process of the direct and maskless patterning generation using SLA for easy and convenient application and the other is a removal process using wet-etching process. In this study, cured status of epoxy pattern is most important parameter because of the beer-lambert law according to the diffusion of UV light. In order to improve the contact force between patterns and substrate, prime process was performed and to remove the semi-cured resin which makes a bad effects to the pattern, spin cleaning process using TPM was also performed. At a removal process, contact force between photo-curable resin as an etching mask and Si wafer is important parameter.

• 한국정밀공학회지
• /
• 제25권2호
• /
• pp.123-130
• /
• 2008

A 3D structure production method for microstereolithography is a useful way that produces complex structures with flexible processes and low cost. Several UV curable resins were blended and the optimal resin for micro-lens fabricate was selected through viscosity, workability and transmission tests. It consists of 1, 6 - Hexanediol diacrylate with 15 Apha and Isobornyl acrylate for reducing some shrinkage. When fabricating a micro-lens array on large surface, some distortion of shape occurred because of the surface tension between cured part. To overcome this problem, the optimal processing conditions were derived from considering amount of the resin and surface tension. Large surface Micro-lens array, which are a type of elliptical convex and consist of 18,000 micro-lens in the range of 2cm*2cm were fabricated. The focal length to the X-axis and Y-axis were calculated. To verify the performance, measure an energy distribution of transmitted light from the Large surface Micro-lens array.

• Journal of the Optical Society of Korea
• /
• 제15권3호
• /
• pp.289-292
• /
• 2011

Reactive mesogen (RM) is an organic liquid crystal molecule that can be self-aligned to have an optic axis of birefringence when coated over a polyimide alignment film. A free-standing optical wave-plate film consisting of RM and low-loss optical polymers was fabricated in this work, and the film was inserted across the polymer waveguide to form an integrated optical polarization converter. For convenient evaluation of the polarization converters, a waveguide polarizer and analyzer were fabricated in series. The polarization conversion efficiency was measured to be 25 dB for the wavelength range from 1520 to 1580 nm. The wave plate exhibited a temperature-dependent retardation of $4.5^{\circ}$ for a temperature change from 25 to $100^{\circ}C$.

• Korean Chemical Engineering Research
• /
• 제47권3호
• /
• pp.316-320
• /
• 2009

폴리카보네이트(polycarbonate)는 가볍고, 내충격성 및 가공성이 우수하여 광학기기의 렌즈 및 각종 건축물의 투명 소재 등에 유리의 대체품으로서 널리 이용되고 있으나 낮은 표면경도를 가지고 있어 유통 또는 사용시의 접촉으로 인하여 제품에 손상을 줄 염려가 있다. 따라서 본 연구에서는 폴리카보네이트 필름에 아크릴레이트 올리고머, 모노머, 용매, 염료, 실리콘 아크릴레이트, 그리고 광개시제 등을 다양한 함량비율에 따라 혼합한 코팅용액을 제조하고, 구성 성분의 비율에 따른 폴리카보네이트 필름의 표면 경도, 접착력, 그리고 투과율의 변화를 실험하였다. 그 결과 최대 연필 경도가 2H이고, 접착력과 가시광선 투과율이 우수한 코팅용액의 조성을 얻었다. 색상코팅 실험 결과, 기존 산화물 증착에 의해 구현하던 색상을 본 실험에서 제조한 코팅 용액을 사용하여 거의 대부분 구현할 수 있었으며, 이를 바탕으로 색상 윈도우 렌즈를 제작한 결과, 매우 깨끗하고 균일한 색상과 표면을 가졌다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제39권4호
• /
• pp.637-642
• /
• 2016

본 연구에서는 TMPTA와 DHPA를 모체로 Ultima $Gold^{TM}$ LLT 유기 섬광체를 혼합하여 자외선에 광중합 특성을 가진 플라스틱 섬광체를 처음으로 제작하고, 그 섬광특성을 조사하였다. 제조된 플라스틱 섬광체의 발광스펙트럼 파장 범위는 380~520 nm이었으며, 중심파장은 423 nm 었다. 400~800 nm의 파장범위에 대하여 50% 이상의 투명도를 나타내었으며, 섬광체의 섬광 감쇠 시간특성이 12 ns인 1개의 성분이 측정되었다. 제작된 플라스틱 섬광체의 발광파장 스펙트럼이 광전자증배관의 양자효율 특성과 잘 매칭되며, 향후 3D 프린팅 소재로서의 최적화 공정 개발을 통해 3D 프린팅 기술에 접목함으로써 인체 도시메트리에 활용하고자 한다.

• 한국재료학회지
• /
• 제30권11호
• /
• pp.627-635
• /
• 2020

3D printing technology is a processing technology in which 3D structures are formed by fabricating multiple 2D layers of materials based on 3D designed digital data and stacking them layer by layer. Although layers are stacked using inkjet printing to release various materials, it is still rare for research to successfully form a product as an additive manufacture of multi-materials. In this study, dispersion conditions are optimized by adding a dispersant to an acrylic monomer suitable for inkjet printing using Co₃O₄ and Al₂O₃. 3D structures having continuous composition composed of a different ceramic material are manufactured by printing using two UV curable ceramic inks whose optimization is advanced. After the heat treatment, the produced structure is checked for the formation and color of the desired crystals by comparing the crystalline analysis according to the characteristics of each part of the structure with ceramic pigments made by solid phase synthesis method.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.424-425
• /
• 2007

We have studied the optically compensated splay mode using reactive mesogen (RM) monomer to reduce setting voltage and phase transition time from initial bend to splay state. When the OCS cell has low pretilt angle close to $45^{\circ}C$, OCS state can be formed easily. The low pretilt angle was formed through the polymerization of UV curable reactive RM monomer at the surfaces. In this way, reorientation of the LC is well defined and thus the device shows better performances in setting voltage and phase transition time.

• 한국염색가공학회지
• /
• 제34권1호
• /
• pp.1-9
• /
• 2022

The durable FR treatments such Pyrovatex and Proban have been used for cotton fibers, while the finishes involve toxic ammonia or formaldehyde release during finishing process or finished products. In this study, ecofriendly flame-retardant treatment of cotton fabrics was carried out using UV-curable formulations of Vinyl bisphosphonic acid (VBPA), Acrylaminide and Triacryloylhexahydro-1,3,5-triazine, as a monomer, a comonomer and a cross-linking agent respectively, which can introduce a cross-linked copolymer networks. With an optimal finish formulation, the flame retardancy of LOI 29.8 was maintained even after 10 laundering cycles. In TGA analysis, the DTGA peak decreased from 389℃ to 252℃ and the amount of char yield increased from 6.1% to 46.1% compared to the untreated cotton. In addition, MCC analysis showed that Peak HR and THR decreased by 59.4% and 69.2% respectively, compared to the untreated cotton. The pyrolysis and combustion behaviors of the FR-treated cotton implied a condensed-phase flame-retarding mechanism.

• 한국염색가공학회지
• /
• 제33권4호
• /
• pp.230-237
• /
• 2021

The flame-retardant (FR) treatments of wool fibers using Hexafluorozirconate/titanate salts and tetrabromophthalic anhydride can cause skin irritation and gas toxicity due to Zr and Br compounds respectively. A water-soluble polyfunctional cyclophosphazene derivative, synthesized through substitution reaction of Hexachloro cyclophosphazene and N-[3-(Dimethylamino)propyl] metacrylamide, was applied as a durable flame-retardant for wool fabrics. Also, a crosslinked structure was introduced to improve washing durability of the FR-wool, up to 10 laundering cycles, using Acrylamide(AAm) and Triacryloylhexahydrotriazine (TAHT) as a comonomer and a crosslinker respectively. The mole ratios of the TAHT and AAm concentrations compared to the Dichloro tetrakis{N-[3-(Dimethylamino)propyl]methacrylamido} cyclcophosphazene (DCTDCP) were optimized to 1.33 and 7.5 respectively. In addition, the pyrolysis and combustion properties of the FR wool were assessed using LOI, TGA and microcalorimetry suggesting a solid-phase FR mechanism.

• 센서학회지
• /
• 제32권5호
• /
• pp.295-299
• /
• 2023

Herein, we propose a simple fabrication method for MXene-coated V-groove sensors for applications. To enhance the sensitivity of this sensor, we applied MXene particles, instead of conventional metal layers, as a sensing material on the sensor's surface. This allows for an easier fabrication, as well as higher sensitivity of the sensor compared to those of our previously demonstrated metal-based V-groove sensor. Additionally, polyurethane-acrylate, a UV-curable liquid polymer, can be easily applied using micro-electromechanical systems-based surface-texture micromachining. The sensor sensitivity is approximately 0.08 /mm, and it can be improved by increasing the number of V-grooves. We believe that the proposed MXene-based wearable sensor offers a great potential in detecting various types of motions characteristic of human activities.