• 한국응용과학기술학회지
• /
• 제26권2호
• /
• pp.171-178
• /
• 2009

A comparative analysis of the hindered amine light stabilizers (HALS) and UV abosrber (UVA) and their respective photostabilizing effect on wood plastic composites (WPCs) are reported in this study. The influence of accelerated weathering on the mechanical properties of the composites and the microscopic morphology of a degraded layer on the cross section and the surface were studied. UV absorbers were more efficient at preventing composite lightening than was UV stabilizer. The amount of whitening decreased with the increase of photostabilizers. With the addition of a UV absorber (Tinuvin360), the tensile modulus and strength of the composites increased slightly. However, the addition of a light stabilizer (Tinuvin770) and a UV absorber decreased the tensile modulus and strength of the composites. After 250 and 500 hr exposure, tensile modulus and strength of the un stabilized and stabilized composites decreased. The tensile strength of UV absorber (Chimassorb81)-stabilized composites was significantly greater than that of control and light stabilizer (Tinuvin770)- and UV absorber (Tinuvin360)-stabilized composites. UV absorber-stabilized samples showed less whitening and photodegradation than control and light stabilizer-stabilized samples.

• Elastomers and Composites
• /
• 제41권3호
• /
• pp.182-193
• /
• 2006

본 연구에서는 고분자형 자외선 안정제 DGEBA-HALS의 광분해 억제 효과를 평가하기 위해 SBR과 NR 고무를 사용하여 광안정제 첨가에 따른 UV 조사 영향을 고찰하였다. 이를 위해 광안정제를 첨가하지 않은 배합고무, 상용화된 광안정제인 Cyabsorb UV-3529를 첨가한 배합고무, 그리고 고분자형 DGEBA-HALS를 첨가한 배합고무의 영율, 인장강도, blow-off 변형, 가교밀도 측정을 통한 시편의 물리적 특성변화 등을 관찰하였다. UV 조사 후 모든 시편에서 영율이 증가하였으며 인장강도는 광안정제를 첨가한 시편이 첨가하지 않은 시편보다 우수했다. 특히 NR의 경우 DGEBA-HALS 첨가 시 인장강도가 향상되었다. Blow-off 변형 실험결과도 영율 실험 결과와 비슷하였다. UV-vis transmission spectra를 통한 SBR 배합고무의 투과도를 조사한 결과 광안정제를 첨가함으로써 약 4%의 향상된 투과도를 보였다. Cyabsorb UV-3529와 DGEBA-HALS의 첨가는 비슷한 경향의 투과도를 나타내었다. SEM을 통해 시편의 표면을 관찰한 결과 광안정제를 첨가함으로써 UV 조사에 의한 균열의 크기가 작아짐을 알 수 있었고, 특히 DGEBA-HALS는 상용화된 Cyabsorb UV-3529 보다 더 좋은 광분해 안정효과를 갖는 것을 확인할 수 있었다.

• 분석과학
• /
• 제24권5호
• /
• pp.336-344
• /
• 2011

문화재 보존처리 시 사용되는 에폭시계수지에 플라스틱 첨가제 중 하나인 자외선 안정제를 첨가함으로써 수지의 광노화를 예방하는데 효과가 있는지 알아보고자 하였다. 문화재 접합 및 복원 과정에서 많이 사용되는 3가지 에폭시계수지에 HALS계와 UVA계 자외선 안정제를 농도별로 첨가하여 시편을 제작하였으며, 자외선 노화 실험을 실시하여 색도 변화, SEM 관찰, 접촉각, FT-IR 분석을 하였다. 또한 인장 전단 접착 강도 시험을 통해 자외선 안정제 첨가 유무에 따른 에폭시계수지의 물성 변화를 확인하였다. 분석 결과, 자외선 안정제를 첨가하여도 화학 구조상의 분해를 방지할 수 없지만 에폭시 R과 에폭시 A는 UVA계 자외선 안정제를 0.1% 이하 첨가함으로써 에폭시계수지의 접착 강도에 크게 영향을 미치지 않고 황변현상이나 균열과 같은 광노화로부터 최소화 할 수 있음을 확인하였다. 이를 통해 문화재접합 및 복원에 사용되는 에폭시계수지의 광노화 문제점을 보완하고 접합 및 복원재로서의 수명을 연장시킬 수 있을 것으로 기대된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.77-78
• /
• 2008

• Journal of the Korean Wood Science and Technology
• /
• 제24권4호
• /
• pp.47-55
• /
• 1996

UV transmission spectra of water-soluble acrylic resin films containing hydroxybenzophenolic, hydroxyphenylbenzotriazolic UV absorber and HALS(hindered amine light stabilizer) were investigated by exposure time(before exposure weathered for 160 and 320hours) in QUV Weather-Ometer. Also the YID(yellowness index difference), LID(lightness index difference) and CD(color difference) of dried water-soluble acrylic resin films and the coated woods of Larix leptolepis were analyzed by addition level of UV absorber(0, 1, 2 and 3%) and HALS(0, 0.5, 1 and 1.5%) and by exposure time in QUV Weather-Ometer. They showed no significant effects on UV transmission spectra of dried water-soluble acrylic resin films in the range of 300 to 400nm irrespective of exposure time. However, UV transmission decreased as increase of exposure time. UV transmission spectra were lower in dried water-soluble acrylic resin films containing hydroxybenzophenolic UV absorber and HALS than in these containing hydroxyphenylbenzotriazolic UV absorber and HALS in the range of 350 to 400nm. The least YID, LID and CD in the coated woods of Larix leptolepis appeared at the addition level of 3%, based on non-volatile content, in hydroxybenzophenolic and hydroxyphenylbenzotriazolic UV absorber, and of 1.5% in HALS to water-soluble acrylic resin.

• 한국분말재료학회지
• /
• 제27권3호
• /
• pp.233-240
• /
• 2020

Nano-sized ZnSe particles are successfully synthesized in an aqueous solution at room temperature using sodium borohydride (NaBH₄) and thioglycolic acid (TGA) as the reducing agent and stabilizer, respectively. The effects of the mass ratio of the reducing agent to Se, stabilizer concentration, and stirring time on the synthesis of the ZnSe nanoparticles are evaluated. The light absorption/emission properties of the synthesized nanoparticles are characterized using ultraviolet-visible (UV-vis) spectroscopy, photoluminescence (PL) spectroscopy, and particle size analyzer (PSA) techniques. At least one mass ratio (NaBH4/Se) of the reducing agent should be added to produce ZnSe nanoparticles finer than 10 nm and to absorb UV-vis light shorter than the ZnSe bulk absorption wavelength of 460 nm. As the ratio of the reducing agent increases, the absorption wavelengths in the UV-vis curves are blue-shifted. Stirring in the atmosphere acts as a deterrent to the reduction reaction and formation of nanoparticles, but if not stirred in the atmosphere, the result is on par with synthesis in a nitrogen atmosphere. The stabilizer, TGA, has an impact on the Zn precursor synthesis. The fabricated nanoparticles exhibit excellent photo-absorption/discharge characteristics, suggesting that ZnSe nanoparticles can be alloyed without the need for organic solutions or high-temperature environments.

• 한국응용과학기술학회지
• /
• 제31권3호
• /
• pp.422-439
• /
• 2014

본 연구에서는 자외선 차단제품에서 오일의 극성도, 에멀젼의 종류, 제품의 점도, 증점제의 종류 그리고 광안정제 등이 자외선 차단 효율에 미치는 영향을 조사해 보았다. 그 결과 오일의 극성도가 높으면 자외선 차단 효과는 높게 측정되었으며(Butyloctyl salicylate: SPF 44.10, PA 7.93), 반대로 오일의 극성도가 낮으면 자외선 차단 효과는 낮게 측정되었다(Dimethicone: SPF 16.40, PA 5.57). 에멀젼의 종류는 O/W 에멀젼보다 유기 자외선 차단제가 외상에 존재하는 W/O 에멀젼에서 자외선 차단 효율이 더 높게 측정되었다. 제품의 점도는 높아질수록 자외선 차단 효율이 비례적으로 상승하는 경향을 나타내었으며, 증점제의 종류 및 유화입자 크기는 자외선 차단 효과에 미치는 영향이 크지 않았다. 또한 광안정제의 함유 여부도 자외선 차단 효율에 영향을 미치는 중요한 인자 중의 하나로 나타났다. 이러한 결과들은 자외선 차단제의 추가적인 증량이 없어도 자외선 차단 효율을 더 높일 수 있음을 의미하는 것으로, 앞으로 자외선 차단제품 개발 시 경제적 효율성을 높이는데 큰 도움이 될 것으로 사료된다.

• Bulletin of the Korean Chemical Society
• /
• 제31권9호
• /
• pp.2575-2580
• /
• 2010

We present a method for chemically reducing silver alkylcarbamate complex with hydrazine to synthesize silver nanocolloids in an organic solvent using polyvinylpyrrolidone (PVP) as the stabilizer. To determine the optimal conditions for preparing stable silver colloids of controlled size and shape, the silver 2-ethylhexylcarbamate (Ag-EHCB) complex, PVP, hydrazine, and 2-propanol solvent concentrations in the reaction mixture were varied. The initial colloid has a mean particle diameter of 5-80 nm, and it exhibits an absorption band with various shapes in the UV region with a maximum near 420 nm. UV-vis spectroscopy, TEM, and X-ray diffraction techniques were used to investigate the formation and growth process of the metallic silver nanocolloids.

• Macromolecular Research
• /
• 제15권6호
• /
• pp.560-564
• /
• 2007

The photostabilization and cure kinetics of UV-curable, optical resins containing various formulations of photostabilizers were investigated to determine the system with the highest cure conversion and durability. Photo-DSC analysis revealed that increasing the concentration of a UV absorber (UVA) decreased both the crosslink density and the cure rate due to competition for the incident photons between the photoinitiator and the UVA, whereas including a hindered amine light stabilizer (HALS) hardly affected either the cure conversion or the cure rate due to its very low absorption of 365 nm. This result was confirmed by FTIR-ATR spectroscopy and UV-visible spectroscopy analyses. QUV ageing experiments showed that the cure conversion and durability were the highest for the UVA/HALS formulation at a ratio of 1 : 2, which is due to their synergistic action.

• Macromolecular Research
• /
• 제10권3호
• /
• pp.168-173
• /
• 2002

Unstabilized low-density polyethylene (LDPE) films and films formulated with hindered amine light stabilizer (HALS) were exposed to UV-radiation; and the physicochemical changes during photooxidation processes have been investigated using tensile, FTIR spectre-photometric and thermal analytical (DSC) techniques. The dependence of tensile properties (elongation- and stress-at-break), carboxyl index and heat of fusion on UV-irradiation time have been discussed. The use of HALS is found to be effective in maintaining the UV-mechanical properties of the LDPE films. The experimental results showed that there exists no correlation between mechanical properties and carbonyl index, whereas crystallinity correlates well with carbonyl index in unstabilized and stabilized films for irradiation times greater than 100 h. The rate of formation of carbonyl groups is found to be dependent on UV exposure time. Crystallinity of the film samples is strongly influenced by both exposure time and presence of HALS.