Journal of the Korean Applied Science and Technology (한국응용과학기술학회지)

The Korean Society of Applied Science and Technology (한국응용과학기술학회)
권호 표지
DOI QR코드

DOI QR Code

Color Change and Tensile Properties of Wood Flour Reinforced Polypropylene Composites; Influence of Photostabilizers

  • Lee, Sun-Young (Division of Environmental Material Engineering, Korea Forest Research Institute)
  • Published : 2009.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

A comparative analysis of the hindered amine light stabilizers (HALS) and UV abosrber (UVA) and their respective photostabilizing effect on wood plastic composites (WPCs) are reported in this study. The influence of accelerated weathering on the mechanical properties of the composites and the microscopic morphology of a degraded layer on the cross section and the surface were studied. UV absorbers were more efficient at preventing composite lightening than was UV stabilizer. The amount of whitening decreased with the increase of photostabilizers. With the addition of a UV absorber (Tinuvin360), the tensile modulus and strength of the composites increased slightly. However, the addition of a light stabilizer (Tinuvin770) and a UV absorber decreased the tensile modulus and strength of the composites. After 250 and 500 hr exposure, tensile modulus and strength of the un stabilized and stabilized composites decreased. The tensile strength of UV absorber (Chimassorb81)-stabilized composites was significantly greater than that of control and light stabilizer (Tinuvin770)- and UV absorber (Tinuvin360)-stabilized composites. UV absorber-stabilized samples showed less whitening and photodegradation than control and light stabilizer-stabilized samples.

Keywords

References

  1. M. Schlechter, Plastic wood: Technologies, Market, Business Communications Co., Inc., U.S.A. (2004)
  2. S.Y. Lee, IA. Kang, C.H. Doh and D.J. Mohan, Mechanical and thennal properties of polypropylene/wax/MAPP composites reinforced with high loading of wood flour, Journal of Korean Oil Chemists' Society, 24, 416 (2007)
  3. N.M. Stark and L.M. Matuana, Influence of photostabilizers on wood flour-HDPE composites exposed to xenon-arc radiation with and without water spray, Polymer Degradatation and Stability, 91, 3048 (2006) https://doi.org/10.1016/j.polymdegradstab.2006.08.003
  4. T. Lundin, S.M. Cramer, RH. Falk and C. Felton, Accelerated weathering of natural fiber-filled polypropylene composites, Journal of Materials in Civil Engineering, 16, 547 (2004) https://doi.org/10.1061/(ASCE)0899-1561(2004)16:6(547)
  5. H.G. Karian, Handbook of polypropylene and polypropylene composites, Marcel Dekker, Inc., U.S.A. (2004)
  6. R.M. Rowell, S.E. Lange and R.E. Jacobson, Weathering perfonnance of plant-fiber/thennoplastic composites, Molecular Crystals and Liqid Crystals, 353, 85 (2000) https://doi.org/10.1080/10587250008025650
  7. L. Matuana, D. Kamdem and J. Zhang, Photoaging and stabilization of rigid PVC/wood-fiber composites, Journal of Applied Polymer Science, 80, 1953 (2001)
  8. N.M. Stark and L.M. Matuana, Ultraviolet weathering flour-filled of photostabilized woodhigh- density-polyehylene composites, Journal of Applied Polymer Science, 90, 2609 (2003) https://doi.org/10.1002/app.12886
  9. T. Lundin, Effect of accelerated weathering on the physical and mechanical properties of natual-fiber thennoplastic composites, M.S. thesis, University of Wisconsin-Madison (2001)
  10. N.M. Stark and L.M. Matuana, Surface chemistry and mechanical property changes of wood-flour/high-densitypolyethylene composites after accelerated weathering, Journal of Applied Polymer Science, 96 2263 (2004)
  11. P.D. Evans, P.D. Thay and K.J. Schmatzl, Degradation of wood surfaces during natural weathering. Effects on lignin and cellulose and on the adhesion of acrylic latex primers, Wood Science and Technology, 30, 411 (1996)