• 한국레이저가공학회지
• /
• 제16권2호
• /
• pp.16-18
• /
• 2013

In this paper, we fabricated breathable films on the use of microwave oven by using UV nanosecond laser micromachining, and the number of micro-grooves on the film is controlled for different oxygen transfer rate(OTR). As different number of micro-groove, the breath films of 100,000cc, 120,000cc, and 150,000cc can be fabricated. The breath film package of 120,000cc is used for the experiment of steaming a sweet potato. At the result, the sweet potato is well-cooked with enough moisture in the package not bursted.

• 한국레이저가공학회지
• /
• 제12권4호
• /
• pp.1-5
• /
• 2009

Conventional patterning based on wet-process for multi-layered film is a relatively complex and costly process though it is a necessary step for fabrication of TFT-LCD module. Recently, a direct pattering by laser has been studied because it is low cost and simple process compared to the wet process. In this work, the selective removal process of multi-layered film (polyimide/indium tin oxide/glass) is studied by modeling the thermal and mechanical behavior for multi-layered structure. Especially, the effects of thickness of polyimide layer are examined.

• 한국기계가공학회지
• /
• 제15권6호
• /
• pp.89-94
• /
• 2016

Consumer orientation requires that companies understand consumer needs and produce products that meet their expectations. This study proposes a new additive method that creates a polymer/metal bonding layer and thus can lighten the weight of helmets to develop a consumer-oriented 3D printing helmet. The composite solution is experimentally prepared with copper formate and a photopolymer resin. Stereolithography apparatus and photothermal reactions are introduced to fabricate an adhesive hybrid layer of copper metal and polymer. A UV pulse laser with a 355 nm wavelength was installed to simplify this process. Resistance, adhesion, and accuracy were investigated to evaluate the properties of the layer produced.

• 한국정밀공학회지
• /
• 제21권3호
• /
• pp.171-179
• /
• 2004

Micro-stereolithography technology has made it possible to fabricate a freeform 3D microslructure. This technology is based on conventional stereolithography, in which a UV laser beam irradiates the open surface of a UV-curable liquid photopolymer, causing it to solidify. In micro-stereolithography, a laser beam of a few $\mu m$ diameter is used to solidify a very small area of the photopolymer. This is one of the key technological elements, and can be achieved by using a focusing lens. Thus, the solidification phenomena of the liquid photopolymer must be carefully investigated. In this study, the photopolymer solidification phenomena in response to variations in the scanning pitch of a focused laser beam was investigated experimentally. The effect of layer thickness on the solidification width and depth was also examined. These studies were conducted under the conditions of relatively lower laser power and relatively higher scanning speed. Moreover, the photopolymer solidification phenomena for the relatively higher laser power and lower scanning speed was investigated, too. In this case, comparing to the case of lower laser power and higher scanning speed, the photopolymer absorbed large amount of irradiation energy of the laser beam. These results were compared with those obtained from a photopolymer solidification model. From these results, a new laser-scanning scheme was proposed according to the shape of the 3D model. Samples by each method were fabricated successfully.

• 한국전기전자재료학회논문지
• /
• 제29권12호
• /
• pp.786-790
• /
• 2016

Hole explosion behaviors were observed during drilling fine holes with laser beam on the LTCC green bar of $320{\mu}m$ thick after lamination of green sheets prepared by tape casting of thick film process. The incidence of these hole explosions was inversely proportional to hole sizes. The incidence of hole explosion was 20 % number of hole with the size of $60{\mu}m$ exploded for the UV radiation, while the explosion did not appear for hole sizes over $100{\mu}m$. To prevent hole explosion behavior during laser-drilling of fine holes, carbon black powder was added as an additive in the LTCC composition, which has superior thermal durability. As a consequence, hole explosion rate was suppressed to 0.8 % for the hole size of $50{\mu}m$ green sheet with the carbon black amount of 10 weight % and the laser power of 3 watt. Added carbon is thought to reduce the heat-affected region during laser drilling.

• 전기의세계
• /
• 제51권5호
• /
• pp.44-49
• /
• 2002

• 한국광학회:학술대회논문집
• /
• 한국광학회 1996년도 Advance Program of 13th optics andquantum Electronics conference, 1996제13 회 광학 및 양자전자 학술 발표회 논문 요약집
• /
• pp.11-11
• /
• 1996

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권2호
• /
• pp.103-106
• /
• 2000

ZnO is a wide-bandgap II-IV semiconductor and has a variety of potnetial applications. ZnO exhibits good piezoelectric, photoelectric and optical properties, and is a good candidate for an electroluminescence device. ZnO films have been deposited on (001) sapphire by PLD technique. Nd:YAG pulsed laser was operated at a wavelength of $\lambda=355nm$. The ZnO films were deposited at oxygen pressures from base to 500 mTorr. The substrate temperatures was increased from $200^{\circ}C\; to\;700^{\circ}C$ films showed strong UV emission by increasing the partial oxygen pressure. We have investigated the relationship between partial oxygen pressure and the intensity of UV emission.

• 한국레이저가공학회지
• /
• 제16권3호
• /
• pp.27-31
• /
• 2013

To engrave high-density circuit-line patterns in IC substrates, we applied a projection ablation technique in which a dielectric ($ZrO_2/SiO_2$) mask, a DPSS UV laser instead of an excimer laser, a refractive beam shaping optics and a galvo scanner are used. The line/space dimension of line patterns of the dielectric mask is $10{\mu}m/10{\mu}m$. Using a ${\pi}$ -shaper and a square aperture, the Gaussian beam from the laser is shaped into a square flap-top beam; and a telecentric f-${\theta}$ lens focuses it to a $115{\mu}m{\times}105{\mu}m$ flat-top beam on the mask. The galvo scanner before the f-${\theta}$ lens moves the beam across the scan area of $40mm{\times}40mm$. An 1:1 projection lens was used. Experiments showed that the widths of the engraved patterns in a buildup film ranges from $8.1{\mu}m$ to $10.2{\mu}m$ and the depths from $8.8{\mu}m$ to $11.7{\mu}m$. Results indicates that it is required to increase the projection ratio to enhance profiles of the engraved patterns.

• 한국식품영양학회지
• /
• 제11권3호
• /
• pp.267-271
• /
• 1998

Seyferth 시약인 phenyl(tribromomethyl) mercury 및 diazomethane의 식품보존제인 dehydroacetic acid 및 coumarin과의 발암성과 그 반응기작을 분자 구조적 관점에서 알아보기 위하여 UV/vis 조건과 laser flash photolysis 시켰을 때의 결과는 다음과 같다. 1. Diazomethane과 Phenyl(tribromomethyl) mercury와 dehydroacetic acid와 diazomethane과의 반응은 광화학적 분해 반응에서 생성된 : CBr2와 : CH2 카르벤 중간체의 이탈기 효과에 따라 발암성이 크게 나타났다. 2. laser flash photolysis 상에서 반응시켰을 때 식품보존제의 발암성이 UV/vis 상에서의 photolysis 때보다 크게 나타났다.