• 한국정밀공학회지
• /
• 제27권10호
• /
• pp.40-44
• /
• 2010

Laser drilling is an enabling technology for Through Silicon Via (TSV) interconnect applications. Recent advances in picoseconds laser drilling of blind, micron sized vias in silicon is presented here highlighting some of the attractive features of this approach such as excellent sidewall quality. In this study, we dealt with comparison of heat affection around drilled hole between a picosecond laser and a nanosecond laser process under the UV wavelength. Points which special attention should be paid are that picosecond laser process lowered experimentally recast layer, surface debris and micro-crack around hole in comparison with nanosecond laser process. These finding suggests that laser TSV process has possibility to drill under $10{\mu}m$ via. Finally, the laser drilling platform was constructed successfully.

• 한국진공학회지
• /
• 제18권5호
• /
• pp.358-364
• /
• 2009

펄스레이저 증착법으로 박막의 결함 생성을 최소화하여 우수한 발광 특성을 가지는 ZnO 박막 성장에 대한 연구를 수행하였다. 이를 위하여 기판 온도를 $400^{\circ}C$에서 $850^{\circ}C$까지 변화시켜 박막을 증착한 후 엑스선 회절법, 원자힘 현미경, photoluminescence (PL) 등을 사용하여 박막의 특성 변화를 분석하였다. 그 결과 ZnO 박막은 기판 온도에 관계없이 (0001) 사파이어 기판에 c-축 배향성을 가지며 성장하였음을 확인하였고 기판온도 $600^{\circ}C$에서 가장 조밀한 박막이 형성되면서 박막에 응력이 거의 걸리지 않고 결정성도 우수함을 확인하였다. PL 분석 결과 역시 $600^{\circ}C$에서 증착된 ZnO 박막이 UV 발광 피크의 반치폭 및 결함에 의한 가시영역에서의 발광 등을 고려했을 때 가장 뛰어난 특성을 보여주었다. 이와 같은 결과는 ZnO 박막의 발광 특성이 박막의 구조적 특성과 매우 밀접한 관계가 있음을 나타내며 또한 기판 온도가 매우 중요한 역할을 함을 나타낸다. 결론적으로 기판 온도 $600^{\circ}C$에서 우수한 UV 발광 특성을 가지면서 결함에 의한 가시영역 발광이 거의 나타나지 않는 ZnO 박막을 성장시킬 수 있었고 이러한 박막은 UV 광소자에 응용될 수 있을 것으로 생각된다.

• 융합정보논문지
• /
• 제9권5호
• /
• pp.158-164
• /
• 2019

최근에는 환자의 귀에 거슬리는 소음을 발생시키는 치과 용 핸드 피스의 소음을 줄이기 위한 많은 연구가 주목 받고 있습니다. 일반적으로 배기 밸브, 기계 또는 자동차의 공기 펌프 내부에 흡음재를 추가하는 방법이 기계적 소음을 줄이는 최적의 방법으로 널리 보고됩니다. 본 논문에서는 EPP 기판의 미세 다공성 구조를 이용한 새로운 UV 레이저 가공 및 흡음 효율 향상을 위한 치과 용 핸드 피스의 제조 방법을 연구 하였다. 슬라이스 된 EPP 기판의 표면에 UV 레이저 가공으로 다수의 미세 크기 기공이 만들어졌다. 본 실험에서 다양한 휴대용 기계에 적용할 수 있는 우수한 잠재력을 가진 마이크로 다공성 EPP 기판은 치과 용 핸드 피스 내부의 마이크로 머플러의 흡음 구조에 적용되었고 핸드피스의 소음을 측정한 결과 적용전의 핸드피스에 비해 약 4dB의 흡음효과를 나타내었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.199-199
• /
• 2009

Recently, polymeric microlens arrays have become important elements in many applications. Microlens arrays have been used to enhance luminance efficiency and luminance power efficiency of light-emitting diodes (LEDs) and organic LEDs. Many processes for fabrication of microlens array are studied. Though the MLA has been fabricated by electroformed mold, LIGA process and reflow method, these methods were required masks, multiple process steps and post processing. In this paper, we proposed rapid and direct UV laser direct fabrication process using colorless liquid photopolymer, NOA60 for polarization activated microlens. The microlens arrays are formed on the NOA60 on glass, after the focused laser energy was irradiated to the material. The diameter of MLA was varied from 42 to 88 ${\mu}m$, and the height from 0.9 to 1.6 ${\mu}m$. The MLA fabricated using NOA60 shows more then 85% transmittance as well as good hardness for optical module.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제5C권3호
• /
• pp.97-101
• /
• 2005

ZnO thin films were grown at different plume-substrate (P-S) angles of 90$^{\circ}$ (on-axis PLD), 45$^{\circ}$ and 0$^{\circ}$ (off-axis PLD) using pulsed laser deposition. The x-ray diffraction pattern exhibiting a dominant (002) and a minor (101) peak of ZnO indicates all films were strongly c-axis oriented. By observing of (002) peak, the FWHMs of ZnO (002) peaks decreased and c-axis lattice constant approached the value of bulk ZnO as P-S angle decreased. Whereas the carrier concentration of ZnO thin film deposited at P-S angle of 90$^{\circ}$ was ~ 10$^{19}$ /cm$^{3}$, the Hall measurement of ZnO thin films deposited at P-S angles of 0$^{\circ}$ and 45$^{\circ}$ was impossible due to the decrease of the carrier concentration by the improvement of stoichiometry and crystalline quality. By decreasing P-S angle, the grain size of the films and the UV intensity investigated by photoluminescence (PL) increased and UV peak position showed red shift. The improvement of properties in ZnO thin films deposited by off-axis technique was due to the decrease of repulsive force between a substrate and the particle in plume and the relaxation of supersaturation.

• 한국전기전자재료학회논문지
• /
• 제14권3호
• /
• pp.246-250
• /
• 2001

ZnO thin films for light emission device have been deposited on sapphire and silicon substrates by pulsed laser deposition technique(PLD). A Nd:YAG laser was used with the wavelength of355 nm. In order to investigate the emission properties of ZnO thin films, Pl measurements with an Ar ion laser a light source using an excitation wavelength of 351 nm and a power of 100 mW are used. All spectra were taken at room temperature by using a grating spectrometer and a photomultiplier detector. ZnO exhibited Pl bands centers around 390, 510 and 640 nm, labeled near ultra-violet(UV), green and orange bands. Structural properties of ZnO thin films are analyzed with X-ray diffraction(XRD).

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1992년도 제2회 학술발표회 논문개요집
• /
• pp.3-10
• /
• 1992

pphotostimulated desorpption of NO chemisorbed on ppt(001) at 80K has been studied by the (1+1)-resonance-enhanced multipphoton ionization((1+1)-REMppI) technique. A linearly ppolarized ArF excimer laser ( =193 nm, 6.41eV) is used as the ppumpp laser. A high adsorpption rate selectivity was found in the expposure deppendence of the NO desorpption yield. The NO desorpption yield increases drastically when the amount of NO expposure exceeds ~1.8 L. This result shows that the amount of NO sppecies with a large cross section for pphotostimulated desorpption increases drastically at higher NO coverages. Using scanning tunneling microscoppy, we have observed structural modifications of the chlorinated Si(111)-7$\times$7 surface induced by 266nm laser irradiation. At very low laser fluence of 0.7mJ/$\textrm{cm}^2$, at which thermal desorpption can be ignored, a pperiodic stripped ppattern of a single domain is imaged. This ppattern consists of flat terraces and narrow grooves of ~60 and ~10A in width, resppectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.539-542
• /
• 2000

ZnO thin films for light emission device have been deposited on sapphire and silicon substrates by pulsed laser deposition technique(PLD). A Nd:YAG laser was used with the wavelength of 355 nm. In order to investigate the emission properties of ZnO thin films, PL measurements with an Ar ion laser as a light source using an excitation wavelength of 351 nm and a power of 100 mW are used. All spectra were taken at room temperature by using a grating spectrometer and a photomultiplier detector. ZnO exhibited PL bands centered around 390, 510 and 640 nm, labeled near ultra-violet (UV), green and orange bands. Structural properties of ZnO thin films are analized with X-ray diffraction (XRD).

• 한국레이저가공학회:학술대회논문집
• /
• 한국레이저가공학회 2006년도 추계학술발표대회 논문집
• /
• pp.41-45
• /
• 2006

Auto focusing system to find optimized focal position of laser beam used for material process has been investigated by using fiber confocal method. Wavelength of laser diode (LD) and diameter of single-mode fiber we 780nm and $5.3{\mu}m$, respectively. Intensity distributions of beam reflected from the surface of mirror and silicon bare wafer have been observed in a gaussian form. Experimental results show that focal position obtained by LD is shifted from one observed from surface scribed by laser about $80{\mu}m$. It is due to the difference of wavelength and each divergence of between LD and laser used for material process. It is confirmed that auto focusing control system through position calibration has operated steadily.

• 한국정밀공학회지
• /
• 제32권9호
• /
• pp.781-786
• /
• 2015

Recently, studies of 3D printing methods have been working in various applications. For example, the powder base method laminates the prints by using a binding or laser sintering method. However, the draw back of this method is that the post process is time consuming and does not allow for parts to be rapidly manufactured. The binding method requires the post process while the time required for the post process is longer than the manufacturing time. This paper proposes a UV curing binding method with an integrated piezo printing head system. The optimization of an arbitrary waveform generation for the control of a UV curable resin droplet was researched, in addition to developed optimized UV curing processes in multi nozzle ink jet heads.