• 제목/요약/키워드: UV index

검색결과 287건 처리시간 0.025초

Physicochemical Changes in UV-Exposed Low-Density Polyethylene Films

  • Salem, M.A.;Farouk, H.;Kashif, I.
    • Macromolecular Research
    • /
    • 제10권3호
    • /
    • pp.168-173
    • /
    • 2002
  • Unstabilized low-density polyethylene (LDPE) films and films formulated with hindered amine light stabilizer (HALS) were exposed to UV-radiation; and the physicochemical changes during photooxidation processes have been investigated using tensile, FTIR spectre-photometric and thermal analytical (DSC) techniques. The dependence of tensile properties (elongation- and stress-at-break), carboxyl index and heat of fusion on UV-irradiation time have been discussed. The use of HALS is found to be effective in maintaining the UV-mechanical properties of the LDPE films. The experimental results showed that there exists no correlation between mechanical properties and carbonyl index, whereas crystallinity correlates well with carbonyl index in unstabilized and stabilized films for irradiation times greater than 100 h. The rate of formation of carbonyl groups is found to be dependent on UV exposure time. Crystallinity of the film samples is strongly influenced by both exposure time and presence of HALS.

수용성(水溶性) 아크릴 수지(樹脂)의 자외선(紫外線) 흡수제(吸收劑)와 HALS 첨가(添加)가 일본잎갈나무의 변색(變色)에 미치는 영향(影響) (Effects of UV Absorber and HALS(Hindered Amine Light Stabilizer) Addition in Water-soluble Acrylic Resin on Discoloration of Larix leptolepis (S. et Z.) Gordon)

  • 강경택;이필우
    • Journal of the Korean Wood Science and Technology
    • /
    • 제24권4호
    • /
    • pp.47-55
    • /
    • 1996
  • UV transmission spectra of water-soluble acrylic resin films containing hydroxybenzophenolic, hydroxyphenylbenzotriazolic UV absorber and HALS(hindered amine light stabilizer) were investigated by exposure time(before exposure weathered for 160 and 320hours) in QUV Weather-Ometer. Also the YID(yellowness index difference), LID(lightness index difference) and CD(color difference) of dried water-soluble acrylic resin films and the coated woods of Larix leptolepis were analyzed by addition level of UV absorber(0, 1, 2 and 3%) and HALS(0, 0.5, 1 and 1.5%) and by exposure time in QUV Weather-Ometer. They showed no significant effects on UV transmission spectra of dried water-soluble acrylic resin films in the range of 300 to 400nm irrespective of exposure time. However, UV transmission decreased as increase of exposure time. UV transmission spectra were lower in dried water-soluble acrylic resin films containing hydroxybenzophenolic UV absorber and HALS than in these containing hydroxyphenylbenzotriazolic UV absorber and HALS in the range of 350 to 400nm. The least YID, LID and CD in the coated woods of Larix leptolepis appeared at the addition level of 3%, based on non-volatile content, in hydroxybenzophenolic and hydroxyphenylbenzotriazolic UV absorber, and of 1.5% in HALS to water-soluble acrylic resin.

  • PDF

안경렌즈의 자외선 차단 평가 (Evaluation of Ultraviolet Blocking of Ophthalmic Lenses)

  • 유동식;유종숙
    • 한국안광학회지
    • /
    • 제13권3호
    • /
    • pp.7-12
    • /
    • 2008
  • 목적: 투명과 착색 안경렌즈의 자외선 차단 특성을 평가하고자 하였다. 방법: 안경렌즈의 투과 스펙트럼은 ANSI Z80.1에 제시된 방법으로 측정하였고, UV(200~380 nm; UVA, UVB, UVC) 및 청색광 영역(380~400 nm)에 대하여 각 렌즈의 투과율을 계산하였다. 결과: 중굴절률, 고굴절률의 투명 플라스틱 렌즈 및 착색 플라스틱 렌즈는 UV에서 우수한 자외선 차단 특성을 보였으나, 자외선 차단제를 처리하지 않은 크라운 유리나 CR39는 그렇지 않았다. 고굴절률 렌즈와 눈부심 방지 야간용 렌즈를 제외한 모든 렌즈는 청색광을 효과적으로 차단하지 않았다. 결론: 크라운 유리와 CR39 렌즈는 UV로부터 눈을 보호하기 위해서 자외선 차단제가 필요하다. 또한 고굴절률 렌즈와 눈부심 방지 야간용 렌즈를 제외한 모든 렌즈는 청색광으로부터 눈을 보호하기 위해서 청색광 차단제가 필요하다.

  • PDF

Cure real monitering sensor for UV curable thin epoxy film based on side-polished single mode fiber

  • Kim, Kwang-Taek;HwangBo, Sueng;Kang, Yong-Chul
    • 센서학회지
    • /
    • 제16권4호
    • /
    • pp.254-258
    • /
    • 2007
  • A novel cure sensor based on the side-polished single mode fiber has been proposed and demonstrated. Two different UV curable epoxies were used to verify the feasibility of the side-polished single mode fiber as a high sensitivity cure sensor. The volume change of the epoxy by UV curing results in a corresponding change of the refractive index. The sensor can be used to monitor the curing process, the refractive index variation and the volume change of epoxy in real time during the UV curing process. In addition, small birefringence of the epoxy film can be detected using the sensor.

프리즘 분광계를 이용한 혼합 폴리머의 굴절률 측정과 응용 (Measurement of the Refractive Index of a Mixed Polymer by a Prism Spectrometer and its Application)

  • 김지영;주영구
    • 한국광학회지
    • /
    • 제28권5호
    • /
    • pp.221-228
    • /
    • 2017
  • 프리즘 분광계를 사용하여 액체 상태와 고체 상태의 혼합 폴리머(NOA61, NOA84) 굴절률을 측정하였다. 먼저 속이 빈 작은 프리즘을 제작하고 UV (ultra-violet) 에폭시를 채운 다음 프리즘의 꼭지각과 최소 편향각을 측정하여 굴절률을 측정하였다. 고체 상태의 폴리머는 속이 빈 프리즘에 추가 구조물을 넣고 UV 에폭시를 경화하여 고체 폴리머가 채워진 프리즘을 제작하고 굴절률을 측정하였다. 액체 상태나 고체 상태인 경우 모두, 두 종류의 에폭시를 섞어서 혼합 폴리머를 만들고 혼합비를 조절하면서 굴절률을 측정한 결과 혼합비에 비례하는 굴절률 측정값을 얻었다. 이러한 결과는 UV 에폭시를 사용한 원통형 이중 미세 렌즈배열의 초점거리를 조절할 수 있는 방법을 제공한다.

견본 회화보존처리에 자외선 인공열화견의 적용성 평가 (Estimation of Application of Artificially Deteriorated Silk by Ultraviolets for Conservation of Paintings on the Silk)

  • 오준석;전지연;임인경
    • 보존과학회지
    • /
    • 제27권2호
    • /
    • pp.191-199
    • /
    • 2011
  • 견본 회화 문화재의 보존처리의 보견작업에 적합한 자외선 인공 열화견을 얻기 위해 자외선의 종류, 자외선 조사시간에 따른 열화견의 물리적 특성과 견본 회화 보존처리에의 적용성을 평가하였다. 장파장 자외선(UV-A) 조사 열화견은 단파장 자외선(UV-C) 조사 열화견에 비해 자연상태에서 열화가 일어난 생견과 유사한 표면 손상 형태를 보였다. UV-C 열화견은 자외선 조사와 함께 강도가 급격하게 떨어져 54시간을 조사하였을 때 원래 강도의 12.7%까지 저하한 반면 UV-A 열화견은 168시간 조사하였을 때 원래 강도의 14.2% 수준으로 떨어져 강도 저하가 완만하였다. UV-A 열화견의 수분율은 자외선 조사시간의 증가와 함께 7.3%까지 떨어지다가 증가하지만 UV-C 열화견은 6.0%까지 떨어지다가 다시 증가하였으며 전체적으로 UV-A 열화견의 수분이 높았다. UV-A 열화견은 밝은 황색을 띠며 황변지수가 낮은 반면 UV-C 열화견은 어두운 황갈색이며 황변지수가 높았다. 견본 회화 보존처리에의 적용성을 평가한 결과, UV-A 열화견은 UV-C 열화견에 비해 황변에 의한 색상차가 크지 않아 보견 작업시 염색이나 보채에 크게 문제가 되지 않을 정도이며, 강도면에서 UV-C 열화견은 섬유가 부서지기 쉬운 상태인 것과는 달리, UV-A 열화견은 자연상태에서 열화가 일어난 생견과 유사한 속심이 살아있는 듯한 느낌을 띠었다. 그리고 UV-A 열화견과 UV-C 열화견 모두 친수성을 가져 보채에는 문제가 없었다. 전반적인 평가 결과 UV-C 열화견 보다 UV-A 열화견이 견본 회화의 보견에 사용하기 적합하였다.

Physical and Optical Properties of Hydrophilic Tinted Lens Materials with the Fluoro-substituted Aniline Group

  • Park, Se-Young;Lee, Min-Jae;Sung, A-Young
    • 통합자연과학논문집
    • /
    • 제8권1호
    • /
    • pp.60-66
    • /
    • 2015
  • The physical and optical properties of polymers with 2-fluoroaniline and 4-fluoroaniline added, which can be used for hydrophilic ophthalmic lenses, were investigated in this study. The UV-blocking properties of 2- and 4-fluoroaniline were also investigated by measuring their UV transmissibility. 2- and 4-Fluoroaniline were used as additives for the basic combination of HEMA, 5% AA, and 1% MMA, and the materials were copolymerized with EGDMA as the cross-linking agent and AIBN as the initiator. The refractive index, water content, optical transmittance, tensile strength, and contact angle were measured to evaluate the physical properties of the produced hydrogel lens. The measured physical properties of the hydrogel contact lens produced with the copolymerized polymer showed a refractive index of 1.425-1.436; a water content of 36.95-44.65%; a visual light transmittance of 66.0-81.0%; a tensile strength of 0.138-0.281 kgf; and a contact angle of $55.02-57.87^{\circ}$. The UV transmissibility was significantly reduced, which indicates that 2-fluoroaniline and 4-fluoroaniline have UV-blocking properties. This study showed that 2- and 4-fluoroaniline are expected to be used as UV-blocking materials in hydrogel ophthalmic lenses whose physical properties, such as their refractive index and water content, do not change.

Vinylanisole을 포함한 고굴절률 안의료용 렌즈 재료에 관한 연구 (Study on the Ophthalmic Lens Materials with High Refractive Index Containing Vinylanisole)

  • 김태훈;성아영
    • 대한화학회지
    • /
    • 제54권6호
    • /
    • pp.755-760
    • /
    • 2010
  • 본 연구는 3-vinylanisole과 4-vinylanisole를 교차결합제인 EGDMA (ethylene glycol dimethacrylate)와 HEMA (2-hydroxyethyl methacrylate), MMA (methyl methacrylate), NVP (N-vinyl-2-pyrrolidone) 그리고 개시제인 AIBN (azobisisobutyronitrile)과 함께 공중합 하였다. 생성된 고분자 재료의 물리적 특성을 측정한 결과 굴절률 1.4496 - 1.4894, 함수율 22.93 - 35.50%, 가시광선 투과율 88.8 - 90.8%를 나타내었다. 또한, 3-vinylanisole과 4-vinylanisole의 비율이 증가할수록 굴절률은 증가하였으며, 함수율은 감소하였다. 3-vinylanisole과 4-vinylanisole을 15% 첨가한 콘택트렌즈의 경우, UV-A 52.8 - 82.2%, UV-B 13.2 - 26.2%의 투과율을 나타내어 자외선 차단 효과가 다소 있는 것으로 나타났다. 본 실험결과로 볼 때 생성된 공중합체는 자외선 차단성과 고굴절률을 가진 안의료용 재료로 사용될 수 있을 것으로 판단된다.

자외선 흡수제를 첨가한 고분자 중합 및 안 의료용 소재로의 적용 (UV Absorbent-added Polymerization and its Application as Ophthalmological Material)

  • 성아영;김태훈;예기훈
    • 대한화학회지
    • /
    • 제55권1호
    • /
    • pp.98-103
    • /
    • 2011
  • 본 연구는 자외선 흡수제로 사용되는 benzophenone계(group) 및 높은 굴절률과 화학적, 물리적으로 매우 안정한 물질로 알려진 $TiO_2$를 기존의 재료에 첨가하여 자외선 차단 기능을 가진 고분자 재료를 중합하였다. 중합 결과 생성된 고분자의 자외선 흡수 정도를 기존의 재료들과 비교하였으며, 제조된 콘택트렌즈의 함수율, 굴절률 및 광투과율등의 기본적인 물성을 측정하였다. 측정 결과, 자외선 흡수제를 첨가한 콘택트렌즈의 굴절률과 함수율은 각각 1.430~1.440, 35.0~45.0의 값들로 나타나 기존의 콘택트렌즈와 비슷한 결과를 나타내었다. 또한 각 파장대별 광투과율에서는 자외선 흡수제를 넣지 않은 콘택트렌즈에서는 UV-A, UV-B, 가시광선 투과율이 각각 89%, 88%, 89%로 나타나 자외선 투과율이 매우 높았으나, 2-hydroxy-4-methoxy-benzophenone와 2,4-dihydroxy-benzophenone을 첨가한 콘택트렌즈의 경우, 각각 UV-A 0%, UV-B 6%의 투과율을 나타내어 자외선 차단 효과가 있는 것으로 나타났다. 또한 $TiO_2$를 첨가한 콘택트렌즈의 경우, 각각 UV-A 6%, UV-B 51%의 투과율을 나타내어 자외선 차단 효과가 다소 있는 것으로 나타났다. 가시광선 투과율은 모두 77~89%로 콘택트렌즈의 가시광선 투과율의 조건에 만족함을 알 수 있었다.

자외선 조사량에 따른 태양전지 모듈 봉지재의 특성 분석 (Characterization of Photovoltaic Module Encapsulant According to UV Irradiation Dose)

  • 이송은;배준학;신재원;전찬욱
    • Current Photovoltaic Research
    • /
    • 제6권3호
    • /
    • pp.81-85
    • /
    • 2018
  • The photovoltaic modules installed in the actual field are affected by various external environments and the electrical performance output value is generally lowered compared to initial output value. The most of photovoltaic modules consists of low iron glass, encapsulant (EVA), back sheet, frame and junction box assembly based on the solar cells. In this paper, the characteristics of encapsulant which is an important constituent material of photovoltaic module were verified by maximum power determination, electro luminescence images, yellowness index measurement, and gel content measurement after ultraviolet (UV) irradiation exposure. The most commonly installed 72 cells crystalline photovoltaic modules were tested after various UV exposure of 0, 15, 30, and $60kWh/m^2$ and compared with the reference module. After UV exposure of $15kWh/m^2$, which is the current international test condition, a small amount of change was observed in yellowness index and electroluminescence, while a gell content rapidly increased. At a cumulative dose of $60kWh/m^2$, which will be a new international test condition in the near future, however, the yellowness index increased sharply and showed the greatest output power drop.