• Design & Manufacturing
• /
• v.9 no.2
• /
• pp.20-24
• /
• 2015

Recently, the light guide plate (LGP), a component of the BLU, becomes thinner and larger than ever. In industrial field, specialized injection molding technique is applied to mold the ultra-thin LGP such as a ultra-high speed injection molding. Usually very high melt temperature is used for low viscosity. High injection speed and melt temperature lead to yellowing of LGP. In the present paper a series of injection molding experiment was performed under various injection molding conditions. Yellow index, CIE xy, spectral transmittance of sample were measured using the UV-Visible spectrophotometer. Systematic decrease of spectral transmittance in UV-B range was found as the melt temperature was higher. Yellow index and CIE xy were became higher near the gate location in LGP. From the result of analysis of variance, the main factor to affect for yellow index was mold temperature and that for spectral transmittance(at 315 nm) was melt temperature.

• Polymer(Korea)
• /
• v.34 no.6
• /
• pp.588-593
• /
• 2010

New seven acrylic monomers with covalently bonded silicon, germanium, and tin were prepared for high refractive index materials. The monomers were copolymerized with a cross-linkable comonomer (Trimer) to prepare UV-films for optical characterization. The refractive index of the copolymers increased in proportion to the monomer content and extrapolated to determine that of homopolymer. $Ph_3Si$, $Ph_3Ge$, and $Ph_3Sn$ groups contributed to increase the refractive index of acrylic polymer, in which $Ph_3Sn$ was more effective than $Ph_3Ge$. The index increment confidently occurred with $Bu_3Sn$ attachment in comparison with aliphatic acrylic polymers. $Ph_3SnS$-attached acrylate polymer showed a refractive index of 1.671 at 589 nm. The index change was similarly observed at various different wavelengths (656, 830, 1310, and 1550 nm).

• The Korean Journal of Community Living Science
• /
• v.17 no.4
• /
• pp.29-38
• /
• 2006

The present study proposed to develop a Hanji hat that can protect the body from UV rays and be preferred by consumers. For this purpose, using Hanji dyed by ginkgo leaf extract, we manufactured Hats in 12 designs. The UV blocking rate was determined by putting the hats on a mannequin and measuring the quantity of UV rays penetrating through the hat. In addition, preference for each design was surveyed, and the hat most suitable for the purpose was selected. The results of this study are as follows. 1. The UV blocking rate of the manufactured Hanji hats was over 92% for UVA and 97% for UVB in all of the 12 hats. 2. Among the 12 designs, the UV blocking rate for UVA was highest in 'Design(b)' and 'Design(1)' $(P\leq0.05)$, and the UV blocking rate for UVB was identical in all the designs except 'Design(i)' and 'Design(g)' $(P\leq0.01)$. 3. The effect of UV blocking was highest on the nape of the neck; next, on the brow, the cheeks, the nose and the chin in that order. 4. According to the result of the survey of preference, simple designs such as 'Design(a), (b)' and 'Design(9)' were preferred. In addition, it was found that the design would affect the purchase of a hat marked with a UV blocking index (68%). 5. Based on the results of this research as presented above, 'Design(b)', which showed a high UV blocking effect and was highly preferred, was selected as the most suitable hat for the purpose of this research.

• Applied Chemistry for Engineering
• /
• v.16 no.3
• /
• pp.342-347
• /
• 2005

Photocurable hyperbranched acrylates were prepared from acrylic acid and hyperbranched polyol (HBP-16, 32, 64). Physical properties of three kinds of photocurable hyperbranched acrylated were investigated. Thermal stability of UV cured film measured by TGA shifted to higher temperature with increasing of functionality. Hardness, abrasion resistance, and tensile strength of UV cured film also increased with increasing functionality of acrylate. Weathering test for UV cured film showed the value of yellow index increased with increasing functionality of acrylate.

• Journal of Internet Computing and Services
• /
• v.23 no.2
• /
• pp.29-35
• /
• 2022

UV rays have beneficial or harmful effects on the human body depending on the degree of exposure. An accurate UV information is required for proper exposure to UV rays per individual. The UV rays' information is provided by the Korea Meteorological Administration as one component of daily weather information in Korea. However, it does not provide an accurate UVI at the user's location based on the region's Ultraviolet index. Some operate measuring instrument to obtain an accurate UVI, but it would be costly and inconvenient. Studies which assumed the UVI through environmental factors such as solar radiation and amount of cloud have been introduced, but those studies also could not provide service to individual. Therefore, this paper proposes a deep learning model to calculate UVI using solar object information and sunlight characteristics to provide an accurate UVI at individual location. After selecting the factors, which were considered as highly correlated with UVI such as location and size and illuminance of sun and which were obtained through the analysis of sky images and solar characteristics data, a data set for DNN model was constructed. A DNN model that calculates the UVI was finally realized by entering the solar object information and sunlight characteristics extracted through Mask R-CNN. In consideration of the domestic UVI recommendation standards, it was possible to accurately calculate UVI within the range of MAE 0.26 compared to the standard equipment in the performance evaluation for days with UVI above and below 8.

• Journal of Sensor Science and Technology
• /
• v.13 no.5
• /
• pp.350-355
• /
• 2004

A novel UV sensor was manufactured and characterized using the evanescentfield coupling between fiber-planar waveguide (PWG) coupler and prism. A spiroxazine dye was chosen as planar waveguide because its photochromic isomerization induced by UV irradiation. A novel UV sensor was proposed to measure the variation of refractive index and absorption coefficient simultaneously. The wavelength responses of these sensors by UV exposure times were measured 0.48 nm/sec, 0.757 nm/sec, and ATR output power variations were measured $-0.424{\mu}W$/sec and $-0.62{\mu}W$/sec when UV exposure power were 3 mW and 5 mW, respectively.

• Polymer(Korea)
• /
• v.38 no.1
• /
• pp.49-53
• /
• 2014

A novel monomeric UV-absorber was prepared by the reaction of 2,4-dihydroxybenzophenone with N-4-chlorocarbonylphenylmaleimide in the presence of triethylamine. This reactive maleimide was grafted onto polypropylene (PP) by the thermal melt-processing in a mini-max-moulder. IR spectroscopic method was used for the quantitative determination of the extent of grafting of monomeric maleimide. To find the optimal reaction conditions, the dependence of reaction temperature and time and the concentration of monomeric UV-absorber was investigated on the grafting yields. The photooxidative effect of the grafted PP was evaluated in the weatherometer comparing to the PP mixed with UV-absorbers using the carbonyl index of IR spectrum. The grafted PP showed an excellent anti-photooxidative effect.

• Journal of the Korean Ceramic Society
• /
• v.41 no.11
• /
• pp.826-833
• /
• 2004

In this study, photosensitivity dynamics in SiO$_2$ glass with the composition similar to that of silica Planar Lightwave Circuit (PLC) devices was investigated as a fundamental study prior to the device fabrication. Silica bulk glasses with similar composition to the core layer of PLC devices were prepared with variable composition of B$_2$O$_3$. The photosensitivity in boron and germanium co-doped SiO$_2$ glass yields refractive index change $\Delta$n as high as 10$\^$-3/. However such index modulation disappeared after annealing. From the result of annealing experiment and W absorption / Raman spectra, we conclude the compaction model is applicable to our glass system.

• Journal of Bio-Environment Control
• /
• v.12 no.4
• /
• pp.252-258
• /
• 2003

This experiment was performed to investigate the effect of UV-B (4 kJ${\cdot}m^{-2}{\cdot}d^{-1}$) irradiation and growth inhibitor (50 mg${\cdot}L^{-1}$ diniconazole, 500 mg${\cdot}L^{-1}$) treatment on the overgrowth retardation and the growth and yield afterplanting in plug-grown cucumber, tomato, and hot pepper sedlings. Stem length of UV-B-irradiated and iniconazole-treated seedlings was shortened by 38 and 35%^ in cucumber, 37 and 41% in tomato, and 23 and 23% in hot pepper, respectively, compared with non-treated seedlings. While retarding effect ofhexaconazole waslower that that of UV-B or diniconazle. Leaf area and dry weight alson decreased but ldaf thickness increased in UV-B irradiated or growth-inhibitor-treated seedlings. Even thouth the plant height and leaf area of UV-B-irradiated seedlings ant seedling stage were shorter and smaller that those ofnon-treatedd seedlings, they were recovered to the similar level to the growth of non-treated seedlings 20to 30days after trasplantin. The diconazole-and hexaconazole-treated seedlings were delayed recovery to their normal growth, Fruit yiedl of UV-V-irradiated hot pepper and tomato slightly increased but UV-B irradiated cucumer had similar yield to growth-inhibitor-treated one. It suggested that the use of UV-B irradiation could become a reliable tool of overgrowth retardation of plug-grown vegetable seedlings in greenhouse.

• Journal of Korean Society on Water Environment
• /
• v.32 no.1
• /
• pp.98-107
• /
• 2016

This study examined the effects of environmental conditions and the presence of refractory organic matter on oxidation rates of total organic carbon (TOC) measurements based on high temperature combustion and ultraviolet-sulfate methods. Spectroscopic indices for prediction of oxidation rates were also explored using the UV spectra and fluorescence excitation-emission matrix (EEM) of humic acids. Furthermore, optimum TOC instrument conditions were suggested by comparing oxidation rates of a standard TOC material under various conditions. Environmental conditions included salts, reduced ions, and suspended solids. Salts had the greatest influence on oxidation rates in the UV-sulfate method. However, no effect was detected in the high temperature combustion method. The UV-sulfate method showed lower humic substance oxidation rates, refractory natural organic matter, compared to the other methods. TOC oxidation rates for the UV-sulfate method were negatively correlated with higher specific-UV absorbance, humification index, and humic-like EEM peak intensities, suggesting that these spectroscopic indices could be used to predict TOC oxidation rates. TOC signals from instruments using the UV-sulfate method increased with increasing chamber temperature and increasing UV exposure durations. Signals were more sensitive to the former condition, suggesting that chamber temperature is important for improving the TOC oxidation rates of refractory organic matter.