• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1489-1492
• /
• 2005

Compared to other nano-patterning techniques, Nano imprint Lithography (NIL) has some advantages of high throughput and low process cost. To imprint low temperature and pressure, UV Nano imprint Lithography, which using the monomer based UV curable resin is suggested. Because fabrication of high fidelity pattern on topographical substrate is difficult, bi-layer Nano imprint lithography, which are consist of easily removable under-layer and imprinted pattern, is being used. If residual layer is not remained after imprinting, and under-layer is removed by oxygen RIE etching, we might be able to fabricate the bi-layer pattern for easy lift-off process.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 추계학술대회 논문집
• /
• pp.499-500
• /
• 2007

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.359-360
• /
• 2009

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.119-120
• /
• 2008

• 마이크로전자및패키징학회지
• /
• 제25권3호
• /
• pp.37-41
• /
• 2018

본 논문에서는 UV 임프린트 기반의 평면 광 회로층을 이용한 산소농도 검출용 집적형 형광 프로브 모듈을 제안하였다. 제안된 형광 프로부 모듈은 광원과 형광 신호를 고효율로 전송할 수 있게 동일 광 경로를 가지는 비대칭 $1{\times}2$ 빔 분배기 형태로 설계되었으며, 이를 UV 임프린트 공정을 통해 제작하였다. 제작된 광 회로층의 끝단에 최적의 형광 염료 농도로 센서막을 코팅하여 산소 농도 검출용 광학 프로브 모듈을 구현하였다. 제작된 형광 프로부 모듈을 이용한 산소 농도 측정용 센서 시스템은 0%에서 20%의 가스 농도 범위에서 약 0.3%의 분해능까지 산소 농도를 검출 할 수 있었다. 이러한, 평면 광회로 기반의 형광 프로브 모듈은 저가의 집적형 산소 센서 검출 시스템을 가능하게 하여, 화학분야, 바이오 분야, 그리고 대기 및 수질 환경을 모니터링 하는 분야에 적용될 수 있을 것으로 기대된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.633-636
• /
• 2005

Imprint lithography is a promising method for high-resolution and high-throughput lithography using low-cost equipment. As with other nanoimprint methods, ultraviolet-nanoimprint lithography (UV-NIL) resolution appears to be limited only by template resolution, and offers a significant cost of ownership reduction when compared to other next generation lithography (NGL) methods such as EUVL and 157 nm lithography. The purpose of this paper is to suggest optimum values of control parameters of Imprio 100 manufactured by Molecular Imprint, Inc., which is the first commercially available UV-NIL tool, for sound nanoimprint. UV-NIL experiments were performed on Imprio 100 to find dispensing recipe for avoiding air entrapment. Dispensing recipe related to residual layer thickness and uniformity was optimized and 40 nm thick residual layer was achieved.

• 마이크로전자및패키징학회지
• /
• 제22권3호
• /
• pp.73-77
• /
• 2015

본 논문에서는 저가로 쉽게 제작할 수 있는 구조를 지닌 단일칩 형태의 고분자 기반 평판형 분광모듈을 제안하였다. 제안된 분광모듈은 UV 임프린트 기법에 의해 제작되어진 비등간격 나노회절격자와 오목거울이 포함된 평판형 광도파로로 구성되어진다. 회절효율을 향상시키기 위해 나노회절격자의 구조는 $25^{\circ}$의 블레이징 각도와 100nm의 선폭을 가지도록 설계, 제작되었다. 평판형 분광모듈은 700 nm 대역폭과 10 nm 분해능을 가짐을 확인하였다. 이러한 집적형 고분자 분광모듈은 다양한 센서 시스템에 적용될 수 있을 것으로 기대된다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1934-1938
• /
• 2008

Formation of air bubble is the one of common defects in UV nano imprint lithography. Location of dispensing and volume of droplets are among the most important parameters in the process. ]n this study, UV curable resin droplets with different volumes were dispensed at different locations and pressed to investigate air bubble formation. By varying volume of droplet and dispensing location, process conditions were found for minimum air bubble area.

• 한국표면공학회지
• /
• 제42권2호
• /
• pp.59-62
• /
• 2009

Antireflection pattern, moth-eye structure, was fabricated on lens using Ultra Violet nanoimprint lithography and flexible template. Ni template with conical shaped structure was used as a master template to molding. The flexible poly vinyl alcohol template was fabricated by molding. This poly vinyl alcohol template was used as an imprint template of imprint at lens. Using Ultra Violet nanoimprint lithography and poly vinyl alcohol template, polymer based moth-eye structure was formed on lens and its transmittance was increased up to 94% from 92% at 550 nm wavelength.

• 한국표면공학회지
• /
• 제49권2호
• /
• pp.178-185
• /
• 2016

In this study, we have fabricated light guide plates (LGPs) in thin film form for edge type back light unit (BLU) by using UV imprint lithography. In the LGPs, the pattern of functional resins on PC and PMMA substrates were successfully transferred from original master mold through PVC stamp. Optimized pattern arrays with slowly-sloped density were designed to obtain high brightness and uniformity. We could obtain a relatively improved brightness of $950cd/m^2$ and a uniformity of 87.3% by using the NP-S20 functional resins at an input power of 1.3 W because NP-S20 resin could show high formability after UV hardening process. The LGP prepared on polymethylmethacrylate (PMMA) substrate exhibited higher brightness than that on polycarbonate (PC) substrate because PMMA has lower refractive index resulting in more refraction toward the vertical direction.