• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.8
• /
• pp.508-513
• /
• 2017

Ultraviolet (UV) photodetectors are used in various industries and fields of research, including optical communication, flame sensing, missile plume detection, astronomical studies, biological sensors, and environmental research. However, general UV detectors that employ Schottky junction diodes and p-n junctions have high fabrication cost and low quantum efficiency. In this study, we investigated the characteristics of materials used to manufacture UV photodetectors in a low-cost solution process that requires easy fabrication of flexible substrates. We fabricated p-type NiO and n-type ZnO substrates with wide band gap by the sol-gel method and compared the characteristics of substrates prepared under different spin-coating and heat-treatment conditions.

• Current Photovoltaic Research
• /
• v.6 no.3
• /
• pp.81-85
• /
• 2018

The photovoltaic modules installed in the actual field are affected by various external environments and the electrical performance output value is generally lowered compared to initial output value. The most of photovoltaic modules consists of low iron glass, encapsulant (EVA), back sheet, frame and junction box assembly based on the solar cells. In this paper, the characteristics of encapsulant which is an important constituent material of photovoltaic module were verified by maximum power determination, electro luminescence images, yellowness index measurement, and gel content measurement after ultraviolet (UV) irradiation exposure. The most commonly installed 72 cells crystalline photovoltaic modules were tested after various UV exposure of 0, 15, 30, and $60kWh/m^2$ and compared with the reference module. After UV exposure of $15kWh/m^2$, which is the current international test condition, a small amount of change was observed in yellowness index and electroluminescence, while a gell content rapidly increased. At a cumulative dose of $60kWh/m^2$, which will be a new international test condition in the near future, however, the yellowness index increased sharply and showed the greatest output power drop.

• Korean Chemical Engineering Research
• /
• v.46 no.2
• /
• pp.310-315
• /
• 2008

Organic-inorganic hybrid solutions were made using glycidoxypropyl trimethoxysilane (GPTMS) and vinyltriethoxysilane (VTES) as starting materials by sol-gel method. Photochromic coating solutions were prepared by mixing the solution of photochromic dye (spiropyran) dissolved in ethylacetate with the organic-inorganic hybrid solutions. Photochromic films were prepared on polycarbonate sheets by spin coating and cured for 2 h at $100^{\circ}C$. The resulting films exhibited a reversible color change upon irradiation with UV light from transparent to blue. The color-fading speed and pencil hardness of the coating films increased with increasing the GPTMS content in the coating solutions.

• Korean Journal of Food Science and Technology
• /
• v.14 no.1
• /
• pp.1-5
• /
• 1982

An invertase from Korean ginseng (Panax ginseng C. A. Mayer) was purified by means of DEAE-cellulose column chromatography and gel-filtration through Sephadex G-75. The homogeneity of the purified invertase was proved by polyacrylamide gel disc electrophoresis. The enzyme was separated into two subunits by SDS-polyacrylamide gel electrophoresis, showing its molecular weights as 48,000. The enzyme preparation showed a characteristic protein UV-spectra.

• Korean Chemical Engineering Research
• /
• v.46 no.1
• /
• pp.112-117
• /
• 2008

Organic-inorganic hybrid solutions were prepared via sol-gel method using glycidoxypropyl trimethoxysilane (GPTMS) and methyl triethoxysilane (MTES) as starting precursors at a molar ratio of 1:1. The photochromic coating solutions were prepared by mixing the solutions of photochromic dye (spiropyran) dissolved in ethylacetate (EA) with the organic-inorganic hybrid solutions. Photochromic films were prepared on polycarbonate substrate by spin coating and cured for 2 h at $100^{\circ}C$. The resulting films exhibited a reversible color change upon irradiation with UV light. The photochromic properties of the films showed that the color-fading speed increases with increasing the EA content in the coating solutions.

• BMB Reports
• /
• v.33 no.5
• /
• pp.412-416
• /
• 2000

The obligate aerobic Deinococcus are highly resistant against lethal effect of UV-and ionizing-radiation. Only five mesophilic Deinococcus species, i. e. D. radiodurans, D. radiophilus, D. proteolyticus, D. radiopugnans, and D. grandis are known. Since an indispensable role of catalase has been suggested in protecting cells against oxidative stress and UV radiation, Deinococcal catalase activity of each species and electrophoretic profiles of catalases were investigated on gel. Total catalase activity was varied among the species in the aerobically grown culture at stationary phase. The occurrence of multiple forms of catalases with different molecular weights in four species of Deinococcus and of a single catalase in D. radiopugnans suggests that each species shows the unique catalase profiles on gel. Some Deinococcal catalases also exhibit peroxidase activity. Since Deinococcus spp. are less-distinct to each other in their morphology, biochemical and physiological properties, the catalase profiles on PAGE would be useful in identifying the species of Deinococcus.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.517-520
• /
• 2001

The optical properties of $TiO_2$ thin films dispersed in epoxy film, which were prepared with bis-(4, 4'-P-toluenesulfonylacidic isoproplyidene) cycolhexadiol(BTSPC) and UVI 6990 in dry sol-gel process, were investigated. In the case of irradiating UV light on $TiO_2$ thin films, how many nanopartlcles of $TiO_2$ are dispersed in epoxy film was investigated by AFM. The absorption peak of the films was showed at 360nm. Squarylium dye was dispersed in $TiO_2$-epoxy film. Photodegration concerned with amount of dye and time of UV light irradiation was investigated. UV light irradiation on the film occurred dramatical photodegration.

• Textile Coloration and Finishing
• /
• v.22 no.3
• /
• pp.214-219
• /
• 2010

Polyethylene(PE) films were photocrosslinked by continuous UV irradiation. Benzophenone addition as low as 1wt% into the PE film increased the gel fraction up to 96%. The photocrosslinking was attributed to the recombination of PE radicals generated upon UV irradiation, which was enhanced by the hydrogen abstraction of the added benzophenone. Also the crossliked PE showed higher thermal stability and decreased crystallinity with increasing UV energy as shown by TGA, XRD and DSC analysis. It was also possible to fix 5.4% octadecane into PE by the photocrosslinking. The crosslinked PE film containing octadecane showed lower tensile strength and modulus coupled with higher extension compared to that without octadecane, which can be used as a new plasticizing method for the crosslinked PE film.

• Elastomers and Composites
• /
• v.48 no.3
• /
• pp.209-215
• /
• 2013

On this study, visible-light responsive photocatalyst prepared by sol-gel method was evaluated the effect of the reduction of volatile organic compounds (VOCs) occurred in vehicle interior and its property was examined. According to UV/visible result, visible-light responsive photocatalyst was found that the UV-visible peak is red shift at 420nm, is sensitive in the visible light region. With vehicle interior parts and materials coated visible-light responsive photocatalyst, VOCs was measured by GC/MS. Measuring the VOCs generated from vehicle interior parts and materials, the reduction of VOCs was confirmed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.517-520
• /
• 2001

The optical properties of TiO$_2$ thin films dispersed in epoxy film, which were prepared with bits-(4,4'-P-toluenesulfonylacidic isoproplyidene) cycolhexadiol(BTSPC) and UVI 6990 in dry sol-gel process, were investigated. In the case of irradiating UV light on TiO$_2$ thin films, how many nanoparticles of TiO$_2$ are dispersed in epoxy film was investigated by AFM. The absorption peak of the films was showed at 360nm. Squarylium dye was dispersed in TiO$_2$-epoxy film. Photodegration concerned with amount of dye and time of UV light irradiation was investigated. UV light irradiation on the film occurred dramatical photodegration.