• 공업화학
• /
• 제20권5호
• /
• pp.511-516
• /
• 2009

폴리올레핀 복합소재의 UV 광열화 특성을 조사하였다. 열중량분석 결과, 3종의 폴리올레핀 복합소재는 서로 다른 talc 함유량을 가지고 있음을 확인하였다. SAE J1960 규격에 따라 UV 조사된 폴리올레핀 복합소재의 기계적 거동을 관찰하기 위해 인장시험 및 아이조드 충격 시험을 수행하였다. UV 노출 시간이 증가함에 따라 연신율과 저온 충격강도는 급격히 감소하였다. 이는 UV 광열화에 의한 폴리머 분자체인의 절단 및 얽힘 밀도 감소에 따른 탄성력의 감소에 기인한 것으로 보인다. 전자주사현미경 관찰을 통하여 UV 조사 후 표면상에 크랙이나 표면손상은 존재하지 않았지만, UV 노출에 따른 추가적인 talc 입자의 표면 노출을 관찰할 수 있었다. 이러한 talc 입자의 표면 노출은 폴리올레핀 복합소재의 변색 원인으로 추정된다. 적외선분광분석을 통하여, UV 조사된 폴리올레핀 복합소재의 표면상에 광열화가 진행되었음을 확인하였다.

• 자연과학논문집
• /
• 제11권1호
• /
• pp.41-44
• /
• 1999

가정용 칫솔 UV 멸균기의 성능을 개선 할 목적으로, 먼저 UV 처리에 따른 칫솔의 멸균효과를 알아보기 위한 실험을 하였다. UV를 5분, 15분, 30분, 60분의 여러 시간동안 처리하여 실험한 결과, 유의성 있는 효과는 15분 후에 나타났으며, 그 때 80% 이상의 세균 치사율이 됨을 알 수 있었다. UV에 장시간 노출될 경우 나타나는 플라스틱의 탈색을 예방하기 위하여 15분 UV 처리 후 2시간의 무처리 시간을 주고, 다시 3분을 처리한 결과, 97%의 치사율을 보임을 알 수 있었다. 한편, 멸균기에서 칫솔 위치에 따른 멸균효과는 UV light를 직접적으로 받는 위치의 칫솔에만 국한되어 멸균이 되어 이의 개선점이 제시되었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.460-463
• /
• 2005

We studied the nematic liquid crystal (NLC) alignment capability by the Ultraviolet (UV) alignment method on a a-C:H thin -film , and investigated electro-optical performances of the UV aligned twisted nematic (TN)- liquid crystal display (LCD) with the UV exposure on a-C:H thin film surface. A good LC alignment by UV irradiation on a a-C:H thin -film surface was achieved. Monodomain alignment of the UV aligned TN-LCD can be observed. The good electro-optical (EO)characteristics of the UV aligned TN-LCD was observed with oblique UV exposure on the a-C:H thin film surface for 1min.

• 공업화학
• /
• 제26권3호
• /
• pp.326-330
• /
• 2015

고분자 막은 다양한 응용분야에 적용되고 있다. 기존에 고분자 막은 옥외환경에 노출되지 않는 형태로 적용되어 왔으나 최근 대기환경 측정용도, 해수에서 유용금속 추출용 등의 옥외에 적용되는 고분자 막 시스템들이 보고되고 있다. 이에 옥외환경에서의 고분자 막의 특성 연구가 필요하게 되었으며 이러한 측면에서 촉진 자외선 노출 실험 및 이에 대한 영향 연구는 고분자 막의 내후성을 예측할 수 있는 정보를 제공할 수 있다. 본 연구에서는 폴리설폰 비대칭성 막과 폴리프로필렌 부직포 형태의 막에 대해 촉진 자외선 노출을 실시하고 이에 대한 열적, 기계적 특성, 몰폴로지, 그리고 색차변화 특성에 대한 영향을 보고한다. 실험 결과를 통해서 고분자 막의 자외선 노출에 대한 효과는 막 제조시 사용한 고분자 종류 뿐 만 아니라 막의 형태에도 영향을 받는다는 것을 확인하였다. 본 연구는 옥외용도에 적용하는 고분자막에 대한 중요한 정보를 제공할 수 있을 것으로 기대한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.214-217
• /
• 1999

Polymeric composite insulators have been in use for outdoor insulation. However, our knowledge about their long-term performance in a outdoor environment is still very limited. Especially, these insulator are subjected to the environmental stress such as ultraviolet radiation. Hence, in this paper. the influence of UV radiation on the aging of the shed materials was evaluated. For the aging evaluation, these insulators studied by experiment methods such as contact angle measurement. oxidation induced time. SEM/EDX, FTRI-ATR, tracking test for the different insulator samples. With the increased UV exposure time, samples are shown to exhibit degradation comparable to those of new ones

• 펄프종이기술
• /
• 제36권5호
• /
• pp.36-43
• /
• 2004

The behaviors of deterioration in the mechanical and optical properties of paper during sunlight exposure are mainly attributed to UV irradiation. The effect of different additives (anti-UV agents) on paper properties during exposure was studied. The results showed negligible changes in the mechanical properties of samples prepared with two different ways, whereas the shielding ability was increased when the additives were applied to the surface of hand sheets. Also, the paper which is treated with anti UV agents can keep freshness more effectively of agricultural products from UV irradiation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 춘계학술대회 논문집 디스플레이 광소자 분야
• /
• pp.181-184
• /
• 2000

A new photo-alignment material, copoly (PM4Ch-ChMA), copoly (poly (4-methacryloyloxy) chalcone-chalconemethacryl) was synthesized and the electro-optical (EO) characteristics for the photo-aligned vertically aligned (VA)-LC display (LCD) were investigated. The monodomain alignment of the NLC for the photo-aligned VA-LCD by linearly polarized UV exposure on the photo-dimerized copoly (PM4Ch-ChMA) surfaces was observed. Excellent voltage-transmittance characteristics for the photo-aligned VA-LCD by UV exposure for 1 min. on the copoly (PM4Ch-ChMA) surfaces were achieved. The response time of the photo-aligned VA-LCD by UV exposure on for 1 min. the copoly (PM4Ch-ChMA) surfaces was about 39.3 ms. The response time for the photo-aligned VA-LCD decreased with increasing UV exposure time.

• 한국가구학회지
• /
• 제26권4호
• /
• pp.428-434
• /
• 2015

In this study, we received each wood plastic composites (WPC) from three manufacturers. These WPCs were evaluated regarding their physical and mechanical properties of both before and after accelerated weathering by ultraviolet (UV) irradiation. The total time of exposure of the WPCs to UV irradiation was 1800 h. The water absorption, volumetric swelling and shrinkage of WPCs did not affected by UV irradiation. Among the mechanical properties, there was no significant differences in bending strength and screw withdrawal resistance of UV treated WPCs compared with those of reference WPCs. However, surface hardness of WPCs showed decrease under UV irradiation. Stereoscopic microscopy observation revealed deterioration of the surface layer polymer in all weathered WPCs by UV. Exposure of the WPCs to UV irradiation caused decomposition and disappearance of the polymer layer. From this result, we can estimate that damage of polymer by UV led to a decrease in the surface hardness of the WPCs. The wood flours retained original shape after accelerated weathering by UV irradiation.

• 대한가정학회지
• /
• 제45권10호
• /
• pp.73-81
• /
• 2007

The purpose of this study was to increase the ultraviolet-light (UV)-cut ability of cellulose fabrics (cotton, ramie, and rayon) dyed with safflower yellow colorants. For this purpose, samples treated with UV-cut agent and tannic-acid were compared with the untreated samples after UV exposure in terms of K/S value, color changes(${\Delta}E$), SEM, and strength retention. The K/S value rapidly decreased after 28 days exposure, whereas the K/S value of the samples treated with both UV-cut agent and tannic-acid decreased to less than that of the untreated samples. In color changes, $L^*$ increased while $a^*$ and $b^*$ decreased, indicating less red and yellow character in color. This induced a change in the hue, value and chroma values. However the color change(${\Delta}E$) of the samples treated with both UV-cut agent and tannic-acid was less than that of the untreated samples. Scanning electron microscopy (SEM) pictures showed a severe degradation by exposure in all samples. Tensile strength rapidly decreased after 28 days for cotton and rayon, and after 21 days for ramie. However, the strength retention of the samples treated with UV-cut agent and tannic-acid was higher than that of the untreated samples.

• Current Photovoltaic Research
• /
• 제6권3호
• /
• pp.81-85
• /
• 2018

The photovoltaic modules installed in the actual field are affected by various external environments and the electrical performance output value is generally lowered compared to initial output value. The most of photovoltaic modules consists of low iron glass, encapsulant (EVA), back sheet, frame and junction box assembly based on the solar cells. In this paper, the characteristics of encapsulant which is an important constituent material of photovoltaic module were verified by maximum power determination, electro luminescence images, yellowness index measurement, and gel content measurement after ultraviolet (UV) irradiation exposure. The most commonly installed 72 cells crystalline photovoltaic modules were tested after various UV exposure of 0, 15, 30, and $60kWh/m^2$ and compared with the reference module. After UV exposure of $15kWh/m^2$, which is the current international test condition, a small amount of change was observed in yellowness index and electroluminescence, while a gell content rapidly increased. At a cumulative dose of $60kWh/m^2$, which will be a new international test condition in the near future, however, the yellowness index increased sharply and showed the greatest output power drop.