• Nuclear Engineering and Technology
• /
• v.55 no.9
• /
• pp.3383-3387
• /
• 2023

A new dyed polyvinyl alcohol (PVA) film dosimeter based on 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MMT) tetrazolium dye is proposed in this study for measuring high gamma radiation dose. Gamma cell irradiator that contains Co-60 gamma-ray source was used to expose the novel MMT-PVA films to different doses up to 25 kGy. The changed in optical property of irradiated and unirradiated films were characterized by UV-Vis spectrophotometer. The results show that the dose sensitive and the linear range of irradiated films were increased considerably with increase of MMT concentration from 1 to 5 mM. The dose response of dyed PVA film changed substantially with changing relative humidity (12-74%) as well as irradiation temperature (10-40 ℃). The absorbance of the unirradiated films does not change up to 10 days in dark while a significant increase in their absorbance was reported for similar films under fluorescent light. The irradiated dosimeters that kept in dark showed a perfect stability for 54 days. It was found that no obvious impact of dose rate on the irradiated MMT-PVA film dosimeters.

• Journal of Soil and Groundwater Environment
• /
• v.14 no.2
• /
• pp.26-32
• /
• 2009

In this study, the degradation of BTEX (benzene, toluene, ethylbenzene, xylene) was tested in both (Fe$^{3+}$+chelating agent)/H$_2$O$_2$system [Fe(III) 1 mM, oxalate 6 mM, H$_2$O$_2$ 3%, and pH 6] and UV/(Fe3++ chelating agent)lHzOz system [UV dose 17.4 kWhlL, Fe(III) 1mM, oxalate 6 mM,H$_2$O$_2$ 1%, and pH 6]. The types of chelating agents used in experiments were catechol, NTA, gallic, acetyl acetone, succinic, acetate, EDTA, citrate, malonate, and oxalate and the optimum chelating agent for BTEX degradation was determined. The results showed that acetate was the optimum chelating agent for BTEX degradation in both (Fe$^{3+}$+chelating agent)/H$_2$O$_2$ and UV/(Fe$^{3+}$+chelating agent)/H$_2$O$_2$ system, and UV radiation enhanced the degradation of BTEX with any types of chelating agents. Moreover, UV/(Fe$^{3+}$+chelating agent)/H$_2$O$_2$ system, which chelating agent was acetate, removed effectively mixtures of BTEX and MTBE (methyl tert-butyl ether) when the concentration of both BTEX and MTBE was 200 mg/L, respectively. In this system, BTEX was degraded completely and 85% of MTBE was degraded at the reaction time of 180 min. Therefore, UV/((Fe$^{3+}$+chelating agent)/H$_2$O$_2$ system with acetate as a chelating agent removed not only BTEX but also BTEX and MTBE, effectively.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.7
• /
• pp.1307-1318
• /
• 2000

The purpose of this study is to investigate the degradation characteristics of oxalic acid and citric acid by $UV/H_2O_2$ oxidation. For this purpose, the effects of pH, $H_2O_2$ dosage and the concentration of each compounds on the degradation of oxalic acid and citric acid by $UV/H_2O_2$ were investigated. Oxalic acid was effectively degraded at the wavelength of 254 nm, while the degradation efficiency of citric acid was very low at the same wavelength. It was also found that both organic substances were not degraded by the injection of $H_2O_2$ only. The optimum pH of degradation of oxalic acid and citric acid was 4 and 4 to 6, respectively. In the case of $UV/H_2O_2$ oxidation, the degradation efficiency was increased by increasing $H_2O_2$ dosage. The degradation efficiency decreased when the dose of $H_2O_2$ exceeds 200 mg/L. From these results, it can be concluded that the optimum reaction conditions for the degradation of oxalic acid and citric acid by $UV/H_2O_2$ oxidation were pH 4 and 200mg/L of $H_2O_2$.

• Journal of Korean Society of Water and Wastewater
• /
• v.18 no.3
• /
• pp.377-384
• /
• 2004

In the present study, a feasibility of an advanced oxidation process using UV/Hydrogen peroxide($H_2O_2$) system equipped with a medium pressure lamp for secondary effluent reclamation was investigated. Initial concentration of $H_2O_2$ and pH were changed to determine the optimum operation condition for the system. The removal efficiency of color was than 80% with 14.3mg/L of initial $H_2O_2$ and 5 minute of contact time in the UV/$H_2O_2$ system. The color removal was analyzed using first-order reaction equation. The dependence of rate constant (k) on initial $H_2O_2$ represented the rational relationship with maximum value. Residual $H_2O_2$ caused increase of effluent COD, since analyzing agent, dichromate, reacted with $H_2O_2$ in the sample. Therefore, excess initial concentration of $H_2O_2$ would significantly affect effluent COD measurement. At pH variation experiment, both residual $H_2O_2$ and color showed peak in the neutral pH range with the same pattern. Effect of $H_2O_2$ dose also enhanced color removal but raised residual $H_2O_2$ problem in the continuous operation UV system. In conclusion, these results indicated that medium pressure UV/$H_2O_2$ system could be used to control color in the secondary effluent for reclamation and reuse.

• Journal of Radiation Protection and Research
• /
• v.20 no.2
• /
• pp.71-78
• /
• 1995

To develop methods to reduce radiation risk and apply such knowledge to improvement of radiation protection, the effects of cobaltous chloride known as bioantimutagen on the function of E. coli RecA protein involved in the repair of DNA damage were examined. The results demonstrated two distinct effects of cobaltous chloride on the RecA protein function necessary for the strand exchange reaction. Cobaltous chloride enhanced the ability of RecA protein to displace SSB protein from single-stranded DNA and the duplex DNA-dependent ATPase activity. RecA protein was preferentially bound with UV-irradiated supercoiled DNA as compared with nonirradiated DNA The binding of RecA protein to UV-irradiated supercoiled DNA was enhanced in a dose-dependent manner. It is likely that studies on the factors affecting repair efficiency and the DNA repair proteins may provide information on the repair of ionizing radiation-induced DNA damage and the mechanism for DNA radioprotection.

• Polymer(Korea)
• /
• v.38 no.3
• /
• pp.391-396
• /
• 2014

Polymer microneedles can be fabricated by a micromolding method, an easy and cost-effective method. However, it is not easy to achieve uniform coating with an aqueous coating solution due to hydrophobic surface of polymer microneedles. 3-Dimensional coating polymer microneedles could deliver more than twice as much dose as in-plane metal microneedles by increasing coating area and the number of microneedles per unit area. A uniform coating was not obtained by addition of coating additives in the coating solution. The satisfied coating was achieved by treatment of surface of polymer microneedle with metal deposition and UV/ozone, and UV/ozone treatment was an ultimate surface treatment method based on biological safety. Calcein coating polymer microneedles were prepared by using UV/ozone treatment and followed dip-coating, and they delivered calcein in porcine skin successfully after 15 min of insertion.

• Macromolecular Research
• /
• v.13 no.4
• /
• pp.327-333
• /
• 2005

pH-sensitive hydrogels were studied as a drug carrier for the protection of insulin from the acidic environment of the stomach before releasing it in the small intestine. In this study, hydrogels based on poly(ethylene oxide) (PEO) networks grafted with methacrylic acid (MAA) or acrylic acid (AAc) were prepared via a two-step process. PEO hydrogels were prepared by ${\gamma}-ray $ irradiation (radiation dose: 50 kGy, dose rate: 7.66 kGy/h), grafted by either MAA or AAc monomers onto the PEO hydrogels and finally underwent irradiation (radiation dose: 520 kGy, dose rate: 2.15 kGy/h). These grafted hydrogels showed a pH-sensitive swelling behavior. The grafted hydrogels were used as a carrier for the drug delivery systems for the controlled release of insulin. Drug-loaded hydrogels were placed in simulated gastric fluid (SGF, pH 1.2) for 2 hr and then in simulated intestinal fluid (SIF, pH 6.8). The in vitro drug release behaviors of these hydrogels were examined by quantification analysis with a UV-Vis spectrophotometer.

• Journal of Photoscience
• /
• v.9 no.2
• /
• pp.482-484
• /
• 2002

UV irradiation activates various intracellular signaling pathways causing cell death in a DNA damage-dependent and an independent manner. As DNA photoproducts, major forms of DNA damage, are maximally formed by UV light at 260-nm, short wavelength UV (UVC) is more harmful than middle wavelength UV (UVB). However, the differences or similarities in responses of DNA damage-independent intracellular signaling molecules to UVB and UVC are not elucidated. We examined activation of signaling molecules towards apoptosis in normal human fibroblastic cells after irradiation with UVB or UVC at a dose generating the equal amount of DNA photoproducts. Both UVB and UVC induced transient phosphorylation of ERK and sustained phosphorylation of p38. Phosphorylation of p53 at Ser15 and at Ser392 residues were also observed, which were inhibited by a phosphoinositide 3-kinase inhibitor, wortmannin. In contrast, an antioxidant N-acetyl-cysteine and a p38 inhibitor SB203580 suppressed only Ser392 phosphorylation, suggesting that UV-induced oxidative stress and p38 activation were involved in the phosphorylation of this site. The apoptic signals such as mitochondrial cytochrome C release and annexin V binding were then observed. Overall, no difference was found in chronological responses of p53, MAPK, and apoptosis between UVB-irradiated and UVC-irradiated cells. These results suggested that DNA damage-independent intracellular signaling molecules similarly responded to UVB and UVC when the equal level of DNA photoproducts were generated.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.1
• /
• pp.161-166
• /
• 2016

We studied the effect of $Co^{60}$ gamma-radiation on the FBGs by a variation of grating the fabrication parameters. The FBGs were fabricated in a different UV KrF laser intensity using the same boron co-doped photo-sensitive fiber and exposed to gamma-radiation up to a dose of 33.8 kGy. According to the experimental data and analysis results, We confirmed that the laser intensity for grating inscription has a highly effect on the radiation sensitivity of the FBGs and the radiation-induced Bragg wavelength shift by the change of laser process condition showed a difference more than about 30 %.

• The Korean Journal of Zoology
• /
• v.25 no.2
• /
• pp.55-62
• /
• 1982

DNA synthesis, unscheduled DNA synthesis, excision of pyrimidine dimers and phtoreactivation were determined in UV-irradiated differentiating muscle cells at various times of primary culture of 12 day chick embryos and results obtained were as follows. The rates of UV-induced unscheduled DNA synthesis were increased as increase of UV dose. And the rates were gradually decreased as the increase of time after culture, but at higher doses the decreasing tendency was remarkable. The patterns of DNA replication were changed drastically as a function of time so that in the seven day cultures the rate of $^3$H-thymidine incorporation was found to be 0.2% of the original activity. The pattern of inhibition of DNA replication by UV damage demonstrated that in cells of earlier stages there were no remarkable changes, but in cells of later stages there was significant fluctuation. Photoreactivation and the excision of pyrimidine dimer in the one day cultures showed that photoreactivation occurred immediately after UV-irradiation, but excision of pyrimidine dimer was gradually and slowly occurred. These results indicate that the differentiation of embryonic muscle cells accompanies the gradual reduction of DNA replication and unscheduled DNA synthesis, and that the photoreactivation is rapid process compared to excision repair.