• 제목/요약/키워드: UV absorption spectrum

검색결과 182건 처리시간 0.025초

${\zeta}-Carotene$의 산화개열산물 (Oxidative Cleavage Products of ${\zeta}-Carotene$)

  • 김선재
    • 한국식품과학회지
    • /
    • 제32권5호
    • /
    • pp.985-990
    • /
    • 2000
  • ${\zeta}-Carotene$를 dichloromethane에 용해하고 dry ice 상에서 ozonolysis을 행하였다. Ozonolysis에 의해 생성된 화합물은 silica gel chromatography를 행하여 분획하고, photodiode array detector를 이용하여 ODS-HPLC로 분석하였다. Toluene에 ${\zeta}-carotene$을 용해하고 $37^{\circ}C$, 72시간 자동산화시킨 결과, 다수의 carbonyl 및 acidic화합물이 생성되었다. ${\zeta}-Carotene$의 자동산화로부터 생성된 carbonyl 화합물의 대부분은 ozonolysis에 의하여 얻어진 산화개열산물이 나타내는 HPLC상의 거동과 분광학적 특성이 서로 잘 일치하였다. 또한 ${\zeta}-carotene$의 자동산화에 의해 생성된 중앙개열 acidic 화합물은 생물활성을 나타내는 4,5-didehydrogeranyl geranyl acid 표준품과 동일한 분광학적 특성을 나타냈다. 이러한 결과는 in vitro상의 산화적 조건하에서 ${\zeta}-carotene$ 자동산화에 의해 eccentric cleavage가 생성됨을 알 수 있었다.

  • PDF

녹차 추출액 염색 견포의 천연 매염제 처리 효과(I)-천연 매염제 분석 및 색상 변화를 중심으로- (The Effect of Natural Mordants on the Silk Fabrics Dyed with Green Tea Extracts(I) - Analysis of Natural Mordants and the Effect on Color Changes -)

  • 최석철;정진순;천태일
    • 한국염색가공학회지
    • /
    • 제11권3호
    • /
    • pp.15-22
    • /
    • 1999
  • This study investigated the mordanting effect of natural mordants such as camellia ash, bean chaff ash and pyrolignite of iron(Iron(II) Acetate) on silk fabrics dyed with green tea extracts. Experimental variables include the conditions of extraction and dyeing, and types of natural mordants. Inorganic ion contents In natural mordants were analysed by Induced Coupled Plasma Atomic Emission Spectrometer. In the ash Al, Fe, Si and Mn were in % unit, Cr and Ni were detected in ppm unit, and in the aqueous extracts of the ash all the metal ions were in ppm unit. On the other hand, fairly high content of Al(2.13% ) in camellia ash extract and Fe(7.91% ) in the aqueous extracts of pyrolignite iron were detected. The absorbance intensity of green tea extracts in UV-Visible spectrum increased with the temperature and time of extraction. The maximum absorption wavelength of the extracts appeared at 272.5nm and 210.5nm. The US values of silk fabrics dyed with green tea extracts were increased with temperature and time of dyeing. Surface color of silk fabric dyed with green tea extracts was 9.1YR, but it was changed from 7.9YR to 7.5YR by camellia ash extract and 7.4YR to 6.4YR by bean chaff ash extract with increase in mordant concentration. Pre-mordanted and post-mordanted fabrics with pyrolignite of iron were changed from 1.4YR to 1.1R and 7.2P to 4.2P, respectively.

  • PDF

RF 스퍼터링으로 증착된 a-Si$_{1-x}$C$_{x}$: H 박막의 결합구조와 광학적 성질에 미치는 증착변수의 영향 (Effects of Deposition Parameters on the Bonding Structure and Optical Properties of rf Sputtered a-Si$_{1-x}$C$_{x}$: H films)

  • 한승전;권혁상;이혁모
    • 한국표면공학회지
    • /
    • 제25권5호
    • /
    • pp.271-281
    • /
    • 1992
  • Amorphous hydrogenated silicon carbide(a-Si1-xCx : H) films have been prepared by the rf sputtering using a silicon target in a gas mixture of Argon and methane with varying methane gas flow rate(fCH) in the range of 1.5 to 3.5 sccm at constant Argon flow rate of 30sccm and rf power in the range of 3 to 6 W/$\textrm{cm}^2$. The effects of methane flow rate and rf power on the structure and optical properties of a-Si1-xCx : H films have been analysed by measuring both the IR absorption spectrum and the UV transmittance for the films. With increasing the methane flow rate, the optical band gap(Eg) of a-Si1-xCx : H films increases gradually from 1.6eV to the maximum value of 2.42eV at rf power of 4 W/$\textrm{cm}^2$, which is due to an increases in C/Si ratio in the films by an significant increase in the number of C-Hn bonds. As the rf power increases, the number of Si-C and Si-Hn bonds increases rapidly with simultaneous reduction in the number of C-Hn bonds, which is associated with an increase in both degree of methane decomposition and sputtering of silicon. The effects of rf power on the Eg of films are considerably influenced by the methane flow rate. At low methane flow rate, the Eg of films decreased from 2.3eV to 1.8eV with the rf power. On the other hand, at high methane flow rate, that of films increased slowly to 2.4eV.

  • PDF

Effect of extraction conditions on the stability and safety of sericin

  • Ji Hae, Lee;Hyun-Bok, Kim;HaeYong, Kweon
    • International Journal of Industrial Entomology and Biomaterials
    • /
    • 제45권2호
    • /
    • pp.93-98
    • /
    • 2022
  • To assess the feasibility of silk sericin for non-textile application, the storage stability and biological safety of sericin were examined. It was extracted at 37℃, 70℃, 100℃, and 121℃ for 1, 3, and 5 h to elucidate the effect of extraction condition on the stability and safety of silk sericin. The solubility was increased till approximately 26% with extraction temperature of 121℃ for 1 h. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) showed that the molecular weight distribution depended on the extraction conditions. Extracted sericin displayed typical UV absorption bands upon spectrometric analysis. To examine the reproducibility of its obtained conformation, sericin was extracted thrice and its circular dichroism (CD) spectra was measured each time. Most CD spectra showed reproducibility regardless of temperature and time except under 100℃ extraction condition. The diversity of CD spectrum showed gradual reduction and was finally coincident with extraction time from 1 to 5 h. Notably, sericin has a negative peak of approximately 200 nm attributed to random coil conformation, regardless of extraction condition. However, at the 100℃ extraction condition, sericin showed both bands to be negative bands of approximately 200 and 220 nm, respectively. Sericin was centrifuged to determine the stability of storage conditions. The sericin extracted at 100℃ and 121℃ for 1 h was found to form gel rapidly within 1 h, but at 121℃ condition, the gel fraction was approximately 20% within 1 h which retained its phase regardless of storage time. The gel fraction of sericin extracted at 100℃ for 5 h increased with time, however at the 121℃ for 5 h condition, the gel fraction was measured to be less than 10% regardless of increase in storage time. PetriflimTM AC plates test showed that sericin was safe from aerobic bacteria activity by extraction under high temperature.

카올리나이트 KGa-2 (표준 점토)의 인산염 흡착-탈착 특성 (Phosphate Adsorption-Desorption of Kaolinite KGa-2 (Source Clay))

  • 조현구;최재호;문동혁;김순오;도진영
    • 한국광물학회지
    • /
    • 제21권2호
    • /
    • pp.117-127
    • /
    • 2008
  • 카올리나이트 KGa-2 (표준 점토)의 인산염 흡착-탈착 특성을 규명하기 위하여 벳치(batch) 흡착 실험을 실시하였으며, 흡착 상태를 알아보기 위하여 ATR-FTIR (Attenuated Total Reflectance-Fourier Transform Infrared) 분광분석을 실시하였다. 인의 함량은 UV-VIS-IR 분광분석 기를 사용하여 측정하였으며, 이 때 파장은 820 nm를 이용하였다. pH 4에서 pH 9 범위 내에서 카올리나이트 KGa-2의 인산염 흡착량은 pH가 증가하면 대체적으로 증가하는 경향을 나타내지만, 인산염 농도에 따라 매우 다른 형태를 보여준다. 카올리나이트 KGa-2의 인산염 흡착 특성은 랑미어 흡착등온선, 템킨 흡착등온선, 프로인드리히 흡착등온선 순으로 잘 부합하며, 랑미어 최대 흡착능은 $204.1{\sim}256.5\;mg/kg$, 평균간은 232.5 mg/kg으로서, 카올리나이트 KGa-1b에 비하여 높은 인산염 흡착능을 가진다. 카올리나이트에 흡착된 대부분의 인산염이 탈착되기보다, 광물 내에 고착되는 경향을 나타내지만 이에 대해서는 후속적인 실험이 필요한 것으로 판단된다. ATR${\sim}$FTIR 스펙트럼에서 카올리나이트에 의한 흡수피크의 위치가 인 피크와 거의 중첩되고, 카올리나이트에 의한 흡수 피크의 강도가 인 피크에 비하여 월등히 크기 때문에 카올리나이트에 흡착된 인에 의한 피크를 카올리나이트 자체에 의한 피크로부터 분리하는 것이 거의 불가능하였다.

은 나노입자 합성을 위한 Bacterial Cellulose 생산 세균의 분리 및 특성 (Isolation and Characterization of Bacterial Cellulose-Producing Bacteria for Silver Nanoparticle Synthesis)

  • 유지연;장은영;손용준;박수연;손홍주
    • 한국미생물·생명공학회지
    • /
    • 제46권2호
    • /
    • pp.120-126
    • /
    • 2018
  • 환경친화적으로 항균성이 부여된 상처치료용 BC 드레싱을 개발하기 위한 기초연구로서, 은 이온에 대해 내성이 있으면서 은 나노입자를 생합성할 수 있는 초산균을 분리 및 동정하였다. 나아가 실험균주에 의한 BC 생산 조건을 조사하였다. 부패된 포도껍질로부터 분리된 G7 균주는 0.1 mM $AgNO_3$ 존재 하에서 생육할 수 있었으며, 16S rRNA 유전자의 염기서열 분석에 의거하여 Acetobacter intermdius로 동정되었다. 탄소원으로 2% glucose, 질소원으로 2% yeast extract, 보조탄소원으로 0.115% acetic acid가 함유된 배지에서 BC 생산량이 최대였다. 최적배지에서 생성된 BC의 구조적 특성을 FT-IR 및 XRD를 사용하여 조사한 결과, 생성된 BC는 전형적인 천연 cellulose와 동일한 cellulose I인 것으로 확인되었다. G7 균주를 0.1 mM $AgNO_3$ 가 함유된 최적 배지에서 배양한 결과, 배양액의 색깔이 적갈색으로 변하였으며, 이것은 은 나노입자가 생성되었음을 의미한다. 은 나노입자의 합성유무를 UV-Vis 스펙트럼 분석에 의하여 확인한 바, 425 nm에서 은 나노입자의 고유한 흡수스펙트럼이 관찰되었다. 또한, 생성된 BC를 주사전자현미경으로 관찰한 결과, 표면과 기공에 은 나노입자가 생성되어 있음을 재확인하였다.

졸-겔법에 의한 c-축 배향성을 가진 고투과율 ZnO 박막의 제조 (Sol-gel Derived-highly Transparent c-axis Oriented ZnO Thin Films)

  • 이영환;정주현;전영선;황규석
    • 한국안광학회지
    • /
    • 제13권1호
    • /
    • pp.71-76
    • /
    • 2008
  • 목적: 저온에서 열처리에 의해 소다-라임-실리카 유리 위에 강한 UV방사 나노결정 ZnO박막을 단순하고 효율적 방법으로 개선하고자 한다. 방법: 소다-라임-실리카 유리 위에 코팅되고 전열처리 및 300$^{\circ}C$의 후열처리를 행하여 제조된 나노 결정질 ZnO 박막의 결정 구조적, 표면 형상적 및 광학적 특성을 X-선 회절 분석, 전계방사 주사형 전자 현미경, 원자간력 현미경, ultra violet - visible - near infrared spectrophotometer 및 photoluminescence를 이용하여 분석하였다. 결과: 가시광 영역에서 높은 투과율과 자외부에서 뚜렷한 흡수밴드를 갖는 c-축으로 고배향된 ZnO 박막을 300$^{\circ}C$의 후열처리를 통하여 얻을 수 있었다. 비교적 뚜렷한 near band edge 발광을 보이는 photoluminescence 스펙트럼이 나타났으며, 결함에 의한 완만한 녹색 발광은 거의 관찰되지 않았다. 결론: 앞으로 본 연구는 300$^{\circ}C$ 이하의 저온에서 저렴하고 쉽게 ZnO을 기초로한 광전기 소자에 적용될 것이다.

  • PDF

적변삼 외피에서 지질, 페놀성물질 및 철 성분의 축적에 관한 연구 (Accumulation of Crude Lipids, Phenolic Compounds and Iron in Rusty Ginseng Root Epidermis)

  • 이태수;목성균;천성기;윤종혁;백남인;최정
    • Journal of Ginseng Research
    • /
    • 제28권3호
    • /
    • pp.157-164
    • /
    • 2004
  • 인삼재배지에서 나타나는 적변삼 외피세포 조직의 특성과 화학성분을 조사하였던 바 그 결과를 요약하면 다음과 같다. 1. 적변외피는 현미경 관찰결과 적색이 아닌 황색으로 보였으며, 적변외피의 세 포층수는 10∼13층으로 건전외피의 5∼6층에 비해 2배 정도 많았고, 외피층의 두께에 있어서는 적변외피가 179 $\mu\textrm{m}$로서 건전외피의 55$\mu\textrm{m}$에 비해 3.2배 정도 더 두꺼웠다. 2. 착색도는 적변외피가 건전외피에 비해 5.5배 정도 짙게 나타났으며, 적변물질의 각 추출분획별 용해도는 비극성 보다는 극성용매에서 높았고, 또한 UV-spectrum은 275∼280nm에서 흡광 최대를 나타냈다. 3. 적변외피는 지질성 물질은 물론 산불용성 에스테르화 페놀물질, 산불용성 결합 페놀물질, 산불용 축합성 페놀물질, 불용성 결합 페놀물질 및 유리 페놀 물질 함량이 건전외피에 비해 많았으며 철의 함량에 있어서도 적변외피가 2,220 ppm으로 건전외피의 820 ppm 보다 2.7배 정도 많았다. 4. 적변삼은 인삼뿌리가 분포된 근권환경의 어떤 외적환경에 의해 뿌리가 stress를 받을 때 자체방어 물질인 phenol 물질이 외피로 배출되면서 외피의 지질성 물질과 polymerization되고 이때 철(Fe)이 체놀성 물질과 강하게 chelating 되는 것으로 추정된다.

Bacteriorhodopsin과 flavin 복합 LB막을 이용한 색채인식기능의 인공감광소자 (Bacteriorhodopsin/Flavin Complex LB Films-Based Artificial Photoreceptor for Color Recognition)

  • 최현구;정우철;민준홍;이원홍;최정우
    • KSBB Journal
    • /
    • 제14권6호
    • /
    • pp.643-650
    • /
    • 1999
  • 인간시각계의 색채인식기능을 모방하여, 가시광선영역의 빛에 의해 전기신호를 발생시키는 생체분자인 bR과 flavin을 LB막으로 제작하고, 이를 이용하여 개발된 인공감광소자의 색채인식기능을 검증하였다. bR과 flavin은 LB막 상태에서 고유의 특성을 유지할 수 있었으며, 가시광선 영역의 입력광에 대해 안정한 전기신호를 발생시켰다. AFM image와 광전류의 크기를 바탕으로 bR과 flavin LB막의 제작을 위한 최적 조건을 얻을 수 있었다. bR과 flavin을 차례로 적층하여 bR/flavin 복합 LB박막을 제작하였고, 이를 이용하여 감광소자를 제작하였다. 광전류 data를 바탕으로 얻어진 action spectrum을 분석함으로써, 가시광선 영역에서 얻어지는 신호의 형태가 입력되는 빛의 파장 대(색)에 따라 다름을 알 수 있었고, 입력되는 빛의 파장과 측정된 광전류의 크기와의 상관관계를 도출할 수 있었다. 입력되는 빛의 색채(파장)에 따라 나타나는 광전류의 형태 및 크기를 비교하고 제시된 관계식을 이용함으로써, 제안한 소자가 R, G, B 뿐만 아니라 가시광선 영역의 7가지 기본 색에 대해 색채식별능력이 있음을 검증할 수 있었다.

  • PDF

Pseudomonas aeruginosa KLP-2가 생산한 Pyocyanine의 항균활성 및 생리화학적 성상 (Physico-Chemical Properties and Antimicrobial Activity of Pyocyanine Produced by Pseudomonase aeruginosa KLP-2)

  • 박은희;이상준;차인호
    • 생명과학회지
    • /
    • 제11권5호
    • /
    • pp.483-488
    • /
    • 2001
  • 최근 다양한 분야에서 생물학적 제제개발에 관한 연구가 활발한다. 본 연구에서는 생물학적 제제개발을 위한 일련의 연구로 Pseudomonas aeruginosa KLP-2가 생산하는 항균성 물질을 동정하고, 생리화학적 특성을 확인하였다. 본 항균성 물질을 전제하여 FAB-MS로 확인한 결과 pyocyanine으로 동정되었으며, 진청색의 needles 성상을 나타내었고 chloroform, methanol, ethyl acetate와 같은 용매에 높은 용해도를 나타내었다. Pyocyanine의 UV spectrum은 methanol에서 최대 흡광치(318 nm)를 보였고, FAB-MS로 확인한 결과 m/z 211에서 protonated molecular ion(M+H)$^{+}$ 이 관찰되었으며, 분자식은 $C_{13}$H$_{10}$ N$_{2}$O로 확인되었다. Pyocyanine 은 Bacillus cereus, Bacillus subtilis, Micrococcus luteus, Rodococcus equi, Staphylococcus aureus, Streptococcus faecalis, E. coli. Kegionella peneumophila, Shigella flexneri, Shigela boydii, Shigella sonnei, NAG Vibro cholerae, Vibrio parahaemolyticus, Vibro vulnificus, Yersinia enterocolitica 및 Saccharomyces cerevisiae 등의 다양한 세균에 대하여 항균활성을 보여 비교적 넓은 항균범위를 나타내었으며, 특히 Legionella pneumophila에 대하여 0.5$\mu$g의 pyocyanine을 함유한 disk가 48mm의 억제환을 타나내어 가장 높은 항균활성을 보였다.

  • PDF