• 조명전기설비학회논문지
• /
• 제19권8호
• /
• pp.19-23
• /
• 2005

본 연구의 목표는 안정된 출력과 높은 효율을 갖는 저압 UV램프의 구동시스템을 설계하는 것이다. UV램프 시스템은 반도체공정, 살균 등 그 적용범위가 대단히 넓은 전력설비의 하나이며 고부가가치의 제품을 생산하기 위해서는 출력의 안정화 기술은 필수적이다. 본 연구에서 저압 UV램프의 구동시스템 설계 목표는 변환효율 90[%], 출력안정도 ${\pm}7.5[%]$, 램프출력은 300[W] 이상으로, 연구목표에 상응하는 결과를 얻을 수 있었으며 국내시장 선점에 유리할 것이고, 제품의 생산비를 낮추는 시도를 계속한다면, 수출도 가능할 것으로 예상된다. 또한 부가적인 보호회로가 개발되면, 자외선램프용 전자식 안정기의 신뢰성을 크게 재고시킬 것이다.

• 한국응용과학기술학회지
• /
• 제31권3호
• /
• pp.422-439
• /
• 2014

본 연구에서는 자외선 차단제품에서 오일의 극성도, 에멀젼의 종류, 제품의 점도, 증점제의 종류 그리고 광안정제 등이 자외선 차단 효율에 미치는 영향을 조사해 보았다. 그 결과 오일의 극성도가 높으면 자외선 차단 효과는 높게 측정되었으며(Butyloctyl salicylate: SPF 44.10, PA 7.93), 반대로 오일의 극성도가 낮으면 자외선 차단 효과는 낮게 측정되었다(Dimethicone: SPF 16.40, PA 5.57). 에멀젼의 종류는 O/W 에멀젼보다 유기 자외선 차단제가 외상에 존재하는 W/O 에멀젼에서 자외선 차단 효율이 더 높게 측정되었다. 제품의 점도는 높아질수록 자외선 차단 효율이 비례적으로 상승하는 경향을 나타내었으며, 증점제의 종류 및 유화입자 크기는 자외선 차단 효과에 미치는 영향이 크지 않았다. 또한 광안정제의 함유 여부도 자외선 차단 효율에 영향을 미치는 중요한 인자 중의 하나로 나타났다. 이러한 결과들은 자외선 차단제의 추가적인 증량이 없어도 자외선 차단 효율을 더 높일 수 있음을 의미하는 것으로, 앞으로 자외선 차단제품 개발 시 경제적 효율성을 높이는데 큰 도움이 될 것으로 사료된다.

• 상하수도학회지
• /
• 제10권4호
• /
• pp.64-72
• /
• 1996

The effect of $O_3$, $O_3/pH$, and $O_3/H_2O_2$, $O_3/UV$, and $H_2O_2/UV$ advanced oxidation process(AOP) were investigated for the treatment of tetrachloroethylen(PCE) at various condition. The removal efficiency of 10, 20, and 30ppm PCE by ozonation were almost same, only about 60%. And pseudo first-order rate constants, ko for overall oxidation was about 0.097($min^{-1}$). In the $O_3/pH$ AOP experiment for the 20ppm PCE, the removal rate of PCE increased with the increase of pH. However, mineralization rate of PCE at pH 7 was higher than at pH 10. In the $O_3/H_2O_2$ AOP, the removal rate of PCE was the highest at peroxide-to-ozone dosage ratio of about 0.9, which PCE was removed over 99.95%. Despite 42% of PCE was directly photolyzed by the UV irradiation, the removal efficiency of PCE by $O_3/UV$ AOP was only about 70%. In $H_2O_2/UV$ AOP, the removal efficiency of PCE increased to about 98% in proportion to the $H_2O_2$ injection concentration at constant UV intensity of 5W/l.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.840-843
• /
• 2004

UV molding is a process for integrating micro/nano polymeric optical components on optoelectronic modules. In the present study, a microlens array for vertical cavity surface emitting laser(VCSEL) to fiber coupling was designed, integrated and tested. At the design stage, design variables ware optimized to maximize the coupling efficiency, and tolerance analysis was carried out. At the integration stage, the UV transparent mold was fabricated and the microlens array on VCSEL array was integrated by UV molding process. Finally the coupling efficiency of VCSEL to fiber was measured and analyzed.

• KSBB Journal
• /
• 제25권1호
• /
• pp.33-40
• /
• 2010

Conventional disinfectants and disinfection method are expensive, hazardous and often require long periods of exposure. Recently, there is growing interest in complex disinfection process as a disinfection technique in medical instruments such as endoscope, hand piece bur to improve the disinfection efficiency and conveniency. The aim of this study was to evaluate the performance of a new complex process for the purpose of disinfection of Escherichia coli in water. Three single process (electrolysis, UV and ultrasonic process) was combined dual and triple disinfection process. The order of disinfection performance for E. coli in dual process lie in: Electrolysis + UV > Electrolysis + Ultrasonic > UV + Ultrasonic process. Disinfection efficiency of E. coli and degradation of N, N-Dimethyl-4-nitrosoaniline (RNO, indicating material of OH radical formation) of dual process was higher than that of the triple process (Electrolysis + UV + Ultrasonic process). In electrolysis + UV process, disinfection tendency was well agreed with RNO degradation tendency.

• Journal of Korean Society for Atmospheric Environment
• /
• 제16권E호
• /
• pp.39-46
• /
• 2000

Volatile Organic Compounds (VOCs) are considered as the precursors of atmospheric ozone and photochemical smog formation. In particular, chemical plants have produced a lot of VOCs and thus they have been forced to reduce or remove air emissions from the on-site chemical facilities. For the effective removal of VOCs produced in the chemical plants, the authors employed a titanium oxide(TiO$_2$) mediated photo-catalytic oxidation method. The initiation methods employed in this study to produce oxygen radicals for th photo-catalytic oxidation of the VOCs were Ultra-Violet(UV), Non-Thermal Plasma(NTS), and a combination of Uv and NTP. This study focused on a comparison of the removal efficiencies of VOCs as a function of the initiation method such as NTP and/or UV techniques. Removal efficiency change of VOCs as was investigated as a function of the wavelength of the UV lamp(254, 302, and 365 nm) and the degree of TiO$_2$ coating (10 and 30%). In this study, it was identified that removal efficiencies if the VOCs under the normal air environment were much better than those under the nitrogen gas environment containing small amount of oxygen. Removal efficiency by NTP technique was much better than the UV or the combination of UV and NTP techniques. In a comparison if UV wavelengths employed, it was found that shorter wavelength showed better removal efficiency, compared with longer ones. When the removal efficiencies of VOCs were compared in terms of the degree of TiO$_2$ coating, the higher TiO$_2$coating showed better removal efficiency that the lower TiO$_2$ coating

• 공업화학
• /
• 제16권4호
• /
• pp.570-575
• /
• 2005

하수방류수 살균 소독에 이용되는 UV 램프를 기존의 전극용보다 효율을 높이고 수명이 긴 무 전극 UV 램프를 제작하고 그 성능을 알아보았다. 우선 활성물질을 변화시키면서 제조한 램프의 UV 강도 및 온도의 변화를 실험 하였다. 그 결과 활성물질이 Hg/In의 무게비 95/5로 만든 램프를 250 min간 운전한 결과 UV 강도 $300{\mu}W/cm^2$ 및 온도 $200{\sim}250^{\circ}C$로 가장 안정적인 결과를 나타내었다. 그러나 무전극 램프를 장시간 발광시켰을 경우 램프의 온도가 상승하기 때문에 이를 방지하기 위해 실제 하수처리공정에 적용할 수 있는 냉각이 가능한 이중관 형태로 제작하여 UV 강도와 온도 변화특성을 알아보았다. 또한 제작된 무전극 UV lamp를 하수 방류수의 살균 소독을 위하여 대장균(E-coli.)으로 실험한 결과에서도 99.9% 이상의 살균효율을 보였다.

• 상하수도학회지
• /
• 제31권1호
• /
• pp.73-81
• /
• 2017

The UV/chlorine process is a UV-based advanced oxidation process for removing various organic pollutants in water. The process is becoming increasingly popular because of its effectiveness in practice. It is important to the safe and efficient operation of a UV/chlorine process that the optimal operating conditions for both target removal objective and saving energy are determined. Treatment efficiency of target compounds in UV/chlorine process was mainly affected by pH and scavenging factor. In this study, kinetic based mathematical model considering water characteristics and electrical energy dose calculations model was developed to predict of treatment efficiency and optimal operating conditions. The model equation was validated for the UV/chlorine process at the laboratory scale and in pilot tests at water treatment plants.

• 한국물환경학회지
• /
• 제21권3호
• /
• pp.267-273
• /
• 2005

Dye wastewater generally contains strong color and non-biodegradable materials. Therefore, the conventional wastewater treatment plant can hardly meet the regulation of wastewater effluent water. In this study, a pilot plant of the conventional process followed by advanced oxidation process (AOP), was set up to treat the dying wastewater. The treatment efficiencies on the various candidate processes, such as ozone alone, UV alone, ozone/UV, $ozone/H_2O_2$, $H_2O_2/UV$ and $ozone/UV/H_2O_2$, were investigated in the various ozone and $H_2O_2$ doses. As the results, the $ozone/H_2O_2$ process, among the tested processes, showed the highest efficiency for removing color and $COD_{Cr}$. For color removal, the ozone alone process was enough without combining UV or $H_2O_2$. No significantly enhanced efficiency for removing color and $COD_{Cr}$ by UV irradiation was observed because of the very low transmittance of UV light in dye wastewater.

• 한국환경과학회지
• /
• 제22권9호
• /
• pp.1089-1095
• /
• 2013

The degradation of 3-chlorophenol(3-CP) by various AOPs(Advanced Oxidation Processes) including the ultraviolet / hydrogen peroxide, the Fenton and the ultraviolet(UV)-Fenton process has been conducted. The highest removal efficiency for 3-CP in the aqueous phase was obtained by the UV-Fenton process among the AOPs. In the UV-Fenton process, The removal efficiency of 3-CP decreased with increasing pH in the range of 3 to 6, and it decreased with increasing initial concentration. As the intermediates of 3-CP by UV-Fenton reaction, 3-chlorocatechol, 4-chlorocatechol, and chlorohydroquinone were detected thus the degradation pathways were proposed.