• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.199.2-199.2
• /
• 2015

전이금속 칼코겐화합물(TMD)은 2차원 박막 물질로, 그래핀과 함께 차세대 사물인터넷에 적용할 수 있는 전자소자의 소재로 활용될 것으로 기대되고 있다. 특히 TMD는 그래핀과 다르게 1.2 eV 이상의 넓은 밴드갭을 지녀, 기존 실리콘 기반 반도체 소자를 대체할 차세대 물질로 각광받고 있다. TMD는 또한 실리콘 등의 3차원 반도체보다 광전효율이 뛰어나며, 이를 활용한 광전소자의 개발 및 연구가 활발히 진행되고 있다. 그러나 TMD는 그 두께가 나노미터 단위로 매우 얇아 광흡수율이 매우 떨어지는 단점이 있다. 우리는 이러한 TMD 기반 광전소자의 광흡수율을 향상시키기 위해 광전효율이 매우 뛰어난 페로브스카이트(Perovskite)를 TMD 채널 위에 덮음으로써, 이종접합 광전소자를 구현하였다. TMD 물질은 이황화 몰리브데넘($MoS_2$)을 선택하였으며, 광흡수층으로 선택한 페로브스카이트는 $MAPbI_3$을 스핀 코팅을 통해 TMD 채널 층에 접합하였다. 우리는 Photoluminescence 및 UV-Vis 측정을 통해 페로브스카이트 및 페로브스카이트/$MoS_2$ 층의 광특성을 측정하여 페로브스카이트에서 생성된 광캐리어가 확산되어 $MoS_2$에 전달되는 것을 확인하였다. 우리는 추가로 4가지 서로 다른 파장대의 레이저(520, 655, 785, 850 nm)를 이용하여 페로브스카이트 광흡수층이 있을 때와 없을 때의 $MoS_2$ 광검출기의 성능 변화를 관찰하였다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.1
• /
• pp.12-20
• /
• 2010

Metamictization and color change in zircons from Cambodia and Tanzania were investigated. Elements analysis to detect radioactivity of elements such as U and Th, and spectroscopic analysis using UV-VIS and Fourier transform infrared spectroscopy were performed. According to the UV-VIS spectroscopic analysis, it was perceived that many and high intense absorption peaks appeared in blue and colorless zircons, while less and low intense absorption peaks appeared in uranium contained green and yellow zircons. It was found that those stones have made progress to the metamictization. After heat treatment, we could detect opposite results. As the results of FTIR spectroscopy analysis, in the metamict green and yellow zircon, it is showed that 3-phonon combination mode bands of $[SiO_4]^{4-}$ internal vibration in the region of 3100~3400 $cm^{-1}$ are broad and some of them disappear. However, the disappeared bands are observed again due to restored crystal lattice by the heat treatment. Also, $U^{4+}$ peaks that can detect the uranium content in zircon appears at near 4800 $cm^{-1}$ in the green and yellow samples. From this investigation, we could observe the metamictization effect and color change in uranium-bearing zircon by heat treatment using spectroscopic analysis.

• Journal of the Mineralogical Society of Korea
• /
• v.22 no.4
• /
• pp.385-393
• /
• 2009

The spectroscopic characteristics of Madagascar tourmaline were investigated by UV-Vis and FTIR spectroscopy. Physical features were similar to other region's tourmalines. The green and blue samples showed strong absorption band in the 714~743 nm due to $Fe^{3+}$, pink samples showed strong absorption band in the 510~530 nm due to $Mn^{3+}$, brown samples showed strong absorption at 324 nm due to $Mn^{2+}-Ti^{4+}$ IVCT and the colorless samples only revealed weak absorption at 406~413 nm or no absorptions due to low quantity of Mn. Combination of the stretching and bending mode cationic hydroxyl units (metal-OH) are observed in the 4300~4500 $cm^{-1}$. The parallel tube-shaped inclusions which contain hematite were detected generally. This investigation revealed that Cu was not detected but Fe and Mn were detected in the Madagascar tourmalines, and the various colors appear according to the amount of those impurity elements.

• Analytical Science and Technology
• /
• v.19 no.3
• /
• pp.239-243
• /
• 2006

This method is used for the determination of itraconazole in human plasma by liquid-liquid extraction and high performance liquid chromatography. Felodipine was used as an internal standard. After extraction of the plasma with diethyl ether, the centrifuged upper layer was then transferred. The supernantant was evaporated and then reconsituted with mobile phase. The mobile phase was composed of 10 mM ammonium acetate adjusted to pH 7 by phosphoric acid with a flow rate of 0.2 mL/min. A C18 reversed-phase column with a pre-column was used as the analytial column. Linear detection responses were obtained for itraconzole concentration range for 2~1,000 ng/mL. The correlation coefficient of linear regression($R^2$) was 0.9991, limit of quantification (LOQ) was 2 ng/mL, reproducibility was less than 10.8 %, and accuracy was 97.2~108.2%. This method has been successfully applied to the pharmacokinetic study of itraconazole in human plasma.

• Applied Chemistry for Engineering
• /
• v.29 no.1
• /
• pp.97-102
• /
• 2018

In this work, the surface of gold nanoparticles (AuNPs) was modified with small molecules including mercaptoundecanoic acid (MUA) and L-lysine for the development of highly sensitive lateral flow (LF) sensors. Uniformly sized AuNps were synthesized by a modified Turkevich-Frens method, showing an average size of $16.7{\pm}2.1nm$. Functionalized AuNPs were then characterized by transmission electron microscopy, UV-vis spectroscopy, X-ray photoelectron spectroscopy, and Fourier transform infrared spectroscopy. The stable conjugation of AuNPs and antibodies was obtained at pH 7.07 and the antibody concentration of $10{\mu}g/mL$. The functionalized AuNP-based LF sensor exhibited lower detection limit of 10 ng/mL for hepatitis B surface antigens than that of using the bare AuNP-based LF sensor (100 ng/mL).

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.1
• /
• pp.16-22
• /
• 2015

Alkaloids of Vinca minor L. were characterized by HPLC equipped with the photo diode array detector and compared their UV/vis absorption spectra with an index material such as vincamine. UV/vis absorption spectra of more than 9 compounds belong to various classes such as flavonoids were shown and characterized. Extracts with ethanol or hot water were tested against the DPPH (2,2-diphenyl-1-picrylhydrazyl) free-radical to investigate their antioxidant activity. Based on the results, those extracts show about 14-15% of antioxidant activity of quercetine and vitamin C used as standards.

• Korean Journal of Medicinal Crop Science
• /
• v.9 no.1
• /
• pp.21-25
• /
• 2001

Major saponins in ginseng were analysed using reverse phase high performance liquid chromatography with binary mobile phase gradient control system instead of normal phase column. The optimum condition were as following : reverse phase column; ${\mu}{\beta}ondapak\;C_{18}$ column (Waters, $3.9mm{\times}300\;mm,\;5{\mu}m$), methyl cyanaide/water binary mobile phase gradient control system, solvent flow rate; 1.5 ml/min, and UV($203{\mu}m$ ) detector. The complete separation of ginsenoside $Rb_1,\;Rb_2,\;Rc,\;Rd,\;Re,\;Rf\;and\;Rg_1$ was achieved within 55 min. The Regression coefficients of the calibration curves for seven ginsenosides were 0.99.

• Applied Chemistry for Engineering
• /
• v.8 no.2
• /
• pp.315-319
• /
• 1997

In this study, the optimum analytical conditions for determination of distribution of propylene oxide in a nonionic surfactant and separation of fatty alcohols were investigated by Reversed Phase High Performance Liquid Chromatography. To analyse the distribution of propylene oxide (PO) and carbon chain length of a fatty alcohol, we derivatized samples for the purpose of using a UV detector. Also, we studied the influences of columns and mobile phase composition to obtain the optimum separation conditions. In our experiment, Waters Symmetry $C_8(3.9{\times}150mm)$ column was used. And the optimum condition were obtained by gradient elution with methanol and water as the mobile phase. In the plot of log k' vs composition of water in the binary phase, the linerality was very good. We ploted the calibration curve to conform the quality of fatty alcohol, a good linerality was obtained.

• Analytical Science and Technology
• /
• v.11 no.6
• /
• pp.436-439
• /
• 1998

Ginseng saponins were analysed using reversed-phase high performance liquid chromatography with several columns. The optimum conditions were as following : reverse phase column; Novapak $C_{18}$ ODS column ($3.9mm{\times}150mm$, $5{\mu}m$), acetonitrile/water binary mobile phase gradient controller system, solvent flow rate; 1.5 mL/min, and UV (203 nm) detector. The complete separation of ginsenoside $Rb_1$, $Rb_2$, Rc, Rd, Re, Rf and $Rg_1$ was achieved within 50 min. The regression coefficients of the calibration curves for seven ginsenosides were 0.98~0.99.

• Analytical Science and Technology
• /
• v.17 no.2
• /
• pp.98-107
• /
• 2004

In this study, $^1H$ NMR spectroscopy and HPLC were used to identify the type and quantity of each component in an acrylic coating materials applied for an automotive part. By the $^1H$ NMR analysis, it was found that this acrylic coating contained about 88.40 wt% of poly methyl methacrylate (PMMA), 7.05 wt% of methyl methacrylate (MMA), and 2.36 wt% of allyl methacrylate. Polymer additives such as a benzotriazole light stabilizer (Hisorb 328), an oxanilide light stabilizer, butylated hydroxy toluene (BHT), and dimethyl phthalate (DMP) were also identified and measured quantitatively from the $^1H$ NMR spectra. However, only two light stabilizers were identified by reverse phase (RP) HPLC analysis using Bondapak C18 column, methanol mobile phase, and a PDA (Photodiode array) detector. The contents of two light stabilizers in the acrylic coating were measured by a quantitative analysis through UV-Vis spectroscopy and compared with the NMR data. The analytical informations from $^1H$ NMR spetra were better than those from HPLC-PDA plot.