• Applied Biological Chemistry
• /
• v.32 no.1
• /
• pp.30-36
• /
• 1989

Some chelating agents are evaluated as an antioxidant for the autoxidation of soybean oil. Soybean oil is autoxidized under a mild condition (the flow rate of 67ml $O_{2}/min$ and $50^{\circ}C$). The antioxidant effect is measured by active oxygen method, and the spectral change of autoxidized soybean oil examined. The antioxidant effect of chelating agents is increased in order of diphenic acid, naphthoquinone, pyromellitic acid, quinolinic acid and naphthalic acid, and particularly the effect is low in diphenic acid and naphthoquinone. It is found that the effect is more clearly demonstrated by NMR rather than IR and UV and that the effect is dependent on the functional group and geometric molecular structure of chelating agents.

• Korean Journal of Medicinal Crop Science
• /
• v.5 no.2
• /
• pp.113-118
• /
• 1997

Phytochemical analysis on rice bran and its pitch was performed by the tool of TLC, UV- and IR-spetroscopy, so that it was found that they contained ${\gamma}-oryzanol$ and free sterol. GC-MS analysis of free sterol revealed that it was composed of ${\beta}-sitosterol$, campesterol and stigmasterol. Successive phytochemical analysis of ${\gamma}-oryzanol$ revealed that it was composed of ferulic acid ester of triterpene and sterol, respectively. Triterpene moieties of ${\gamma}-oryzanol$ were identified as follows: cycloartanol, cycloartenol, 24-methylenecycloartanol and unknown triterpene; And sterol moieties were found to be identical with free sterols. In addition, characteristic absorption band in UV spectrum (220-340 nm) was exclusively due to ${\gamma}-oryzanol$. Thus, it was suggested that rice brans of nearly all species of Oryza sativa can be quantitatively analyzed by UV absorption spectrometry, even when water soluble pigments was contained in the rice bran.

• Korean Journal of Food Science and Technology
• /
• v.28 no.1
• /
• pp.109-116
• /
• 1996

The relationship between antioxidant activities and physicochemical properties of several fractions obtained from freeze-dried (FD) coffee were investigated. The nine kinds of fraction were consecutively extracted from FD coffee with solvents in increasing order of polarity, and the higher polarity of the solvent the higher extraction yield of the fraction. The antioxidant activities of the fractions were determined by Rancimat and oven test on edible oils. The antioxidant activities of the fractions increased in the order of acetone>ethanol>methanol>50% methanol/water>water fraction, and the antioxidant activities of them were higher on lard than on soybean oil. The antioxidant activity of each fraction was strongly related to the contents of total phenol, total nitrogen content and acidity, whereas color intensity, reducing power, carboxylic acid content showed little contribution to the activity. All fractions had three peaks maxima at 208, 275 and 324 nm on UV-visible spectra, but the only one at 324 nm was linealy proportional to the antioxidant activities of the fractions.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.22 no.1
• /
• pp.55-63
• /
• 2020

This study aimed to investigate responses of plant growth and photosynthesis to different kinds of covering materials with selective light transmit for red leaf lettuce (Lactuca sativa L.). Experimental pot design was attached UV blocking filter, red filter, blue filter, and green filter. The kinds of covering materials showed significant results for plant growth especially control, UV blocking filter, and red filter. The photosynthetic rate and anthocyanin content of red leaf lettuce were higher in control and UV blocking filter than others. The quality of red leaf lettuce was low in red, green, and blue film treatments because of too low anthocyanin content.

• The Korean Journal of Pesticide Science
• /
• v.19 no.1
• /
• pp.1-4
• /
• 2015

The current official perfluorochemicals (PFCs) analysis method is established with hydrophilic-lipophilic balance (HLB) solid phase extraction (SPE) clean-up method with LC-tandem mass spectrometry ($MS^n$). Herein the HLB clean-up method from the official method by Korean government was modified with Envi-Carb$^{TM}$ to improve the clean-up efficiency for agricultural water and the unexpected UV disturbance in the water was effectively removed by the adsorbent treatment without a significant disturbance of quantitation. And quadrupole time of flight mass spectrometry (qTOFMS) was suggested to the available $MS^n$ instruments for the residue analysis of PFCs based on the ng/L of quantitation limits in water as well.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.11
• /
• pp.86-91
• /
• 2021

Recently, functional clothes that can reduce deposition and/or penetration of fine dust have been developed. However, there are no methods to quantitatively evaluate the performance of these clothes. In this study, we developed a method to contaminate a fabric using fine dust and established an approach to quantitatively assess the degree of particle contamination on the fabric surface. Silicate powder was chosen as the particle to simulate fine dust because silicate particles are fluorescent under UV light; therefore, they can be distinguished from any color of non-fluorescent fabric surface. A camera with a high-resolution lens system was used to scan the surface of the contaminated fabric surface, and the degree of particle contamination of the fabric surface was analyzed in terms of the pixels corresponding to the area of the fabric surface contaminated by silicate particles. Finished or unfinished nylon fabrics as well as cotton fabrics were contaminated with silicate particles, and their surfaces were scanned using the established camera. The proposed assessment method was found to be useful for quantitatively comparing the degree of particle contamination of the fabrics.

• Applied Chemistry for Engineering
• /
• v.27 no.3
• /
• pp.299-306
• /
• 2016

In this study, new hydroxyapatite powder surface composites were investigated for protective effects against ultraviolet rays. Hydroxyapatite (HAp) is biocompatible and does not cause nebula phenomenon on skin. We investigated the surface modification of hydroxyapatite to improve UV block and skin usage. Dimethicone, lauroyl lysine, triethoxycaprylylsilane and silica were used as coating agents for the surface modification of HAp. To prepare the composite complex of the modified surface, the dimethicone, lauroyl lysine and triethoxycaprylylsilane were prepared by a dry process, and silica by a hydrothermal synthesis method. The HAp-silica was chosen as the best composite powder when measuring its sun protection levels. We investigated the characteristics of the surface of HAp-silica by SEM, particle size analyzer and energy dispersive spectrometry (EDS). Additionally, the stability in the formulation, UV block effect, and safety in BB creams were investigated. In conclusion, HAp-silica prepared by the modification of HAp complex surface improved the skin usage and UV block effect by enhancing the white cloudy phenomenon. These results indicate that HAp-silica may be used for UV block cosmetics.

• Applied Chemistry for Engineering
• /
• v.24 no.5
• /
• pp.499-506
• /
• 2013

As the usuage of tempered glass for touch panel increased rapidly with the development of industry, the amount of UV curable coating solution used to protect glass surfaces during a tempered glass manufacturing process increased as well. The UV curable coating has advantages compared to thermal curing such as shortened curing time and non-solvent. Appropriated polymer and monomer were used as an acid polymer to grant an alkali peeling ability. The monomers were 2-hydroxyl methylacrylate, 1,6-hexanediol diacrylate and dipentaerythritol hexaacrylate which have acryl groups of 1, 2, and 6, respectively. The combination of three different types of photoinhibitors were used and bisphenol A epoxy diacrylate was used as an oligomer. In this study, experiments were carried out by controlling the amount of photoinitiator, oligomer, and additive while maintaining the constant content of the acid polymer and the acrylic monomer. The changes in physical properties according to the additive content were investigated. It was found that the combination of photoinitiators was necessary to achieve the hardness above 4H and it was possible to control the delamination type of the coating film from a sheet to pieces by the addition of TPO as an initiator. The increase in oligomer contents increased the hardness and adhesiveness alongside dissection time. Talc content of 20 wt% showed the best results.

• Korean Journal of Optics and Photonics
• /
• v.25 no.4
• /
• pp.216-220
• /
• 2014

We have synthesized a $CaMgSi_2O_6:Eu^{2+}$ blue phosphor via a solid-state reaction method. The $CaMgSi_2O_6:Eu^{2+}$ phosphor has monoclinic structure with a space group of C2/c (15), and an emission band peaking at 450 nm (blue) due to the $4f^7-4f^65d$ transition of the $Eu^{2+}ion$. The emission intensity at $100^{\circ}C$ is 54% of the value at room temperature. A white LED was fabricated by integrating a UV LED (400 nm) with our blue phosphor plus two commercial green and red phosphors. The white LED shows a color temperature of 3500 K with a color rendering index of 87 (x = 0.3936, y = 0.3605), and a luminous efficiency of 18 lm/W. The white LED shows a luminance maintenance of 97% after operation at 350 mA for 400 hours at $85^{\circ}C$.

• Polymer(Korea)
• /
• v.37 no.1
• /
• pp.5-14
• /
• 2013

In this paper the effect of UV (ultraviolet) exposure on HDPE (high density polyethylene)-smooth and f-PP (flexible polypropylene) geomembranes is evaluated under UVB-313 (ultraviolet wavelength 290-315 nm) exposure. Tensile property, melt flow index (MFI), oxidation induction time (OIT), both standard-OIT and high pressure-OIT and Fourier transform infrared spectroscopy/attenuated total reflectance (FTIR/ATR) results are discussed. Although tensile properties of the exposed geomembrane samples remained unchanged, the depletion of antioxidants was found higher for f-PP than for HDPE geomembrane. Arrhenius model by extrapolation was used on the data to predict the antioxidant lifetime to a typical site temperature of $20^{\circ}C$. There was no significant difference between the MFI value of the virgin and UV exposed HDPE geomembrane samples but a decrease in MFI was found in f-PP geomembrane that signifies that crosslinking has occurred. From FTIR spectra, the small peak (near $1750\;cm^{-1}$) observed in the spectrum of UV exposed sample corresponds to a carbonyl (C=O) linkage, which suggests that oxidation has occurred in the polymer structure, and another new band for f-PP between 3100 and $3500\;cm^{-1}$ is attributed to a hydroxyl bond and/or hydroperoxide bond.