• 한국입자에어로졸학회지
• /
• 제6권4호
• /
• pp.165-172
• /
• 2010

Titania is widely used as an effective photocatalyst for the photodegradation of environmental pollutants in air. In this study, novel N-doped $ZrO_2/TiO_2$ photocatalysts were synthesized via sol-gel method and characterized by UV-Vis spectrophotometer, transmission electron microscope, and X-ray diffractometer. N-doped $ZrO_2/TiO_2$ photocatalysts were nano-sized with an average particle size of about 20 nm. The XRD pattern of N-doped $ZrO_2/TiO_2$ photocatalysts showed both anatase and rutile phases. The photocatalytic activity of N-doped $ZrO_2/TiO_2$ photocatalysts was evaluated by degradation of NO under UV and visible light irradiation at various parameters such as amount of photocatalyst, concentration of NO, and intensity of light. The photocatalytic activity of N-doped $ZrO_2/TiO_2$ photocatalysts was effective for the enhancement of the degradation of NO and higher than that of $TiO_2$ photocatlysts under UV and visible light irradiation.

• 한국재료학회지
• /
• 제22권2호
• /
• pp.91-96
• /
• 2012

AC and ZnS modified $TiO_2$ composites (AC/ZnS/$TiO_2$) were prepared using a sol-gel method. The composite obtained was characterized by Brunauer-Emmett-Teller (BET) surface area measurements, X-ray diffraction (XRD), energy dispersive X-ray (EDX) analysis, scanning electron microscope (SEM) analysis, and according to the UV-vis absorption spectra (UV-vis). XRD patterns of the composites showed that the AC/ZnS/$TiO_2$ composites contain a typical single and clear anatase phase. The surface properties as observed by SEM present the characterization of the texture of the AC/ZnS/$TiO_2$ composites, showing a homogenous composition in the particles showing the micro-surface structures and morphology of the composites. The EDX spectra of the elemental identification showed the presence of C and Ti with Zn and S peaks for the AC/ZnS/$TiO_2$ composite. UV-vis patterns of the composites showed that these composites had greater photocatalytic activity under visible light irradiation. A rhodamine B (Rh.B) solution under visible light irradiation was used to determine the photocatalytic activity. The degradation of Rh.B was determined using UV/Vis spectrophotometry. An increase in the photocatalytic activity was observed. From the photocatalytic results, the excellent activity of the Y-fullerene/$TiO_2$ composites for the degradation of methylene blue under visible irradiation could be attributed to an increase in the photo-absorption effect caused by the ZnS and to the cooperative effect of the AC.

• 상하수도학회지
• /
• 제12권3호
• /
• pp.55-64
• /
• 1998

The degradation efficiency of chlorophenolic compounds in $TiO_2/H_2O_2$ combined system was compared with that of in $TiO_2$ sole system. As a result, the addition of hydrogen peroxide in photocatalytic oxidation reaction greatly enhanced the degradation efficiency of chlorophenolic compounds due to the availability of the hydroxyl radical formed on the $TiO_2$ surface. The hydrogen peroxide under UV illumination produces hydroxyl radicals that appear to be another source of hydroxyl radical formation. These results indicated the $TiO_2/H_2O_2$ combined system shows higher degradation efficiency than the $TiO_2$ sole system. Compared to another oxidation reaction, hydrogen peroxide assisted photocatalytic oxidation is more promising in practical aspect.

• 펄프종이기술
• /
• 제40권5호
• /
• pp.53-59
• /
• 2008

This study was carried out to investigate the effect of photocatalysis using $TiO_2$ and UV applied for the COD reduction of wastewater in linerboard mill. Trials were done to obtain the optimum addition amounts of $TiO_2$ and $H_2O_2$ to the wastewater and find an appropriate pH condition for photocatalysis on $TiO_2$ for degrading COD. The photocatalytic reaction was applied to the wastewater collected after secondary activated sludge treatment in WWTP of linerboard mill. The optimum application of photocatalysis reaction was obtained under the addition conditions of 2 g/L of $TiO_2$ and 200 mg/L of $H_2O_2$ at pH 3.0, respectively. The removal efficiency of $SCOD_{Cr}$ by photocatalytic treatment was 86.4 % and higher than Fenton treatment in which removal efficiency was 67.4 %. It was concluded that the photocatalytic process using $TiO_2$ and UV could be applied to the wastewater treatment in linerboard mill and also to the dramatic drop-off in NBDCOD load from wastewater of tertiary treatment in WWTP.

• 한국물환경학회지
• /
• 제26권4호
• /
• pp.707-712
• /
• 2010

Nitrogen-doped $TiO_2$ particles have been successfully prepared using titanium tetraisopropoxide as the Ti source and urea as the nitrogen source. As-prepared nitrogen-doped $TiO_2$ was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Brunauer-Emmett-Teller method (BET) and ultraviolet-visible light (UV-vis) absorption spectra techniques. Photocatalytic degradation of Methylene Blue (MB) has been carried out in both solar light (UV-vis) and the visible region (${\lambda}=420nm$). Nitrogen-doped $TiO_2$ exhibits higher activity than the commercial $TiO_2$ photocalyst, particularly under visible-light irradiation because bandgap of nitrogen-doped $TiO_2$ becomes remarkably decreased.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.227.1-227.1
• /
• 2015

산업이 발달하면서 다양한 화학물질이 배출되고 이로 인하여 환경이 오염되고 있으며, 특히, 대부분의 유기 화합물은 대기오염에 많은 영향을 주는 물질로 알려져 있다. 최근 유기 화합물을 제거하기 위해서 UV와 가시광에서 반응하는 광촉매 연구가 진행되고 있다. 본 연구에서는 밴드갭에 변화를 주는 doped $TiO_2$와 가시광에서 반응하는 조촉매를 이용하여 광촉매의 특성을 향상시키는 coupled $TiO_2$를 제조하였다. Doped $TiO_2$를 제조하기 위해서 비금속 물질인 질소(nitrogen)을 사용하였고, coupled $TiO_2$는 graphine oxide(GO)를 환원하여 $TiO_2$-RGO 촉매를 제조하였다. N-$TiO_2$와 $TiO_2$-RGO의 광학 특성을 평가하기 위해서 UV/Vis 분광광도계를 사용하였다. Methylene blue(MB)와 methyl orange(MO)가 분해되는 반응을 통해서 N-$TiO_2$와 $TiO_2$-RGO의 광촉매 특성을 평가하였다. 또한, MB와 MO 분해 테스트에 395 nm long pass filter를 이용하여 가시광에서의 광촉매 활성을 평가하였다.

• 청정기술
• /
• 제16권1호
• /
• pp.46-50
• /
• 2010

본 연구에서는 새집증후군의 대표적 원인물질인 수중 부유 톨루엔을 효율적으로 분해하기 위해 Sn원소를 티타니아 골격에 삽입하여 고온 고압에서 용매열(solvothermal)법으로 Sn-$TiO_2$ 나노 광촉매를 제조하였다. 제조한 Sn-$TiO_2$의 물리적 특성은 X-ray 회절분석법, 투과전자현미경, 주사전자현미경, 자외선-가시선 분광 광도계를 통하여 분석하였다. Sn-$TiO_2$의 광촉매 활성은 수중 부유 톨루엔 광분해반응을 통해 확인하였고, 반응 전후의 수중 부유 톨루엔 농도는 자외선-가시선 분광광도계를 이용하여 측정하였다. 수중 부유 톨루엔 광분해반응 결과 0.01 mol% Sn-$TiO_2$촉매가 순수 $TiO_2$ (anatase) 광촉매보다 활성이 향상되었으며. 500ppm 수중 부유 톨루엔은 300분 이내에 완전히 분해되었다.

• 한국결정성장학회지
• /
• 제12권1호
• /
• pp.7-10
• /
• 2002

$TiO_2$ 박막을 금속유기화합물인 Titanium-naphthenate의 코팅-열분해법으로 제조하였다. 출발물질은 Ti-naphthenate를 toluene에 희석한 용액을 사용하였으며 기판은 slide glass를 사용하였다 Titanium-naphthenate 용액을 spin-coating법으로 기판에 코팅하고 $450^{\circ}C$에서 열터리하여 $TiO_2$ 박막을 제조하였다 제조한 박막의 특성을 UV/Vis, XRD 및 SEM 등으로 박막의 투과율, 굴절률, 결정상 및 표면 형상을 분석하였다. Slide glass 위에 제조한 TiO$_2$ 박막은 투과율은 70~90%이며 420nm에서의 굴절율은 2.7이었다. $TiO_2$박막은 anatase상을 나타내었고 실타래 형상의 주름을 가진 표면을 나타내었다

• 분석과학
• /
• 제19권4호
• /
• pp.301-308
• /
• 2006

본 연구에서 $CCl_4$용해 방법을 이용하여 피치 코팅한 $TiO_2$(anatase형)시료를 제조하였으며, 피치와 $TiO_2$의 비율이 피치 처리한 $TiO_2$시료의 광활성에 미치는 영향에 대하여 고찰하였다. BET 비표면적은 피치의 함량에 의존하였으며 피치의 함량이 증가함에 따라 증가하는 특성을 보였다. 시료의 표면상태 및 원소분석은 SEM와 EDX를 통하여 분석하였으며, 미세구조는 XRD를 통해서 연구하였다. 또한 제조한 광촉매의 광활성으로 UV/VIS를 조사한 것을 특성분석을 하였다. SEM사진으로 보면 피치의 첨가량이 많기 때문에 피치의 분포상태를 분명하게 관찰할 수 있으며, EDX원소 분석결과는 피치 코팅한 $TiO_2$ 광촉매에서 C, O, S와 Ti 같은 네 가지 원소가 존재하였다. 코팅과정 후에도 $TiO_2$ 상은 anatase형을 나타내고 있었다. 피치 코팅한 $TiO_2$은 처리하지 않는 $TiO_2$보다 MB의 UV광분해 효력이 더 우수하였다. 그리고 시료에 $TiO_2$양이 감소함에 따라 MB의 UV광분해 효력이 감소하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.234-234
• /
• 2008

Chemically homogeneous $Ba_{0.6}Sr_{0.4}TiO_3$ (BST) sols were synthesized using barium acetate, strontium acetate, and titanium isoproxide as starting materials. BST thin films of thickness 340 nm were deposited on Pt/$TiO_2/SiO_2$/Si and alumina substrates using spin coating method. The technique used for the processing of these films was Ultraviolet (UV) sol-gel photoannealing, using phto-sensitivity precursor solutions and UV-assisted rapid thermal processing(UV-RTP). The crystallization behaviour of the BST sols and thin films was studied by differential thermal analysis (DTA) and X-ray diffraction (XRD). Variation of permittivity and dielectric loss were measured in LCR-meter, model HP 4394A.