• 전기학회논문지
• /
• 제61권11호
• /
• pp.1656-1661
• /
• 2012

UV inspection technology is being used for predictive maintenance of power facility together with IR-thermography and ultrasonic devices. In this paper, the UV corona camera design, fabrication, and perform a simple test to be take advantage of the diagnostic equipment. The UV corona camera developed a $6.4^{\circ}{\times}4.8^{\circ}$ of the field of view as a conventional camera to diagnose a wide range of slightly enlarged, and power equipment to measure the distance between the camera and the distance meter has been attached. The transmission between 250 to 280nm was 11% ($12.5%{\times}88%{\times}98%$) by combing the transmission on absorption film, window and other filter(UG 5, nickel sulphate and so on). In a distance of 5m with the UV corona camera it is possible to detect partial discharge with a PD level of 2.5pC and a RIV level of $3.6dB{\mu}V$.

• 미생물학회지
• /
• 제3권2호
• /
• pp.9-14
• /
• 1965

The enzyme-producing potentials of industrially important strains of Aspergillus spp. were studied. Irradiation of three original isolates of Aspergillus oryzae to ultra-violet rays resulted in the production of mutants which differed from the parent riboflavin and vitamin $B_{12}$ in culture media. 1. Irradition three strains of Aspergillus oryzae to ultraviolet light produced mutants and two strains of them were selected for soy sauce brewing. 2. The two strains are the physiological mutants of Aspergillus oryzae. Both were found to have superior enzyme activity to their relatives. 3. Aspergillus oryzae UV-induced mutant 172-722 and 569-713 were more powerful than others in the production of riboflavin and vitamin $B_{12}$. The enzyme activity of these strain were high and decreased only slightly even in 20 percent solution of NaCl. 4. Aspergillus oryzae UV-induced mutant 172-722 had more powerful protease producibility in wheat bran media than in modified Czapek's solution. On the contrary, Aspergillus oryzae UV-induced mutant 569-713 had more powerful producibility of saccharogenic and dextrinogenic amylase in modified Czapek's solution than in mold bran. 5. Aspergillus oryzae UV-induced mutant 172-722 formed the spore rapidly and Aspergillus oryzae UV-induced mutant 569-713 did ordinarily. 6. It is found from the results that Aspergillus oryzae UV-induced mutant 172-722 is valuable material for the manufacture of soy sauce because of its high protease activity in 20 percent solution of NaCl. Aspergillus oryzae UV-induced mutant 569-713 is suitable for soy bean mash and for fermented red pepper sauce for its high saccharogenic and dextrinogenic amylase activity in 20 percent solution of sodium chloride.

• 폴리머
• /
• 제36권3호
• /
• pp.315-320
• /
• 2012

아크릴 공중합체의 구조와 다관능성 단량체의 관능성 및 함량을 조절하여 반도체 제조공정에 적합한 자외선 경화형 점착제를 제조하였다. 아크릴 공중합체는 점착력을 부여하는 기본수지로 사용되었고 다관능성 단량체는 광가교 특성으로 인하여 3차원 가교구조와 가교밀도를 변화시키기 위해 사용하였다. 아크릴 공중합체는 단량체 조성에서 2-ethylhexyl acrylate의 함량이 감소할수록 자외선 조사 후의 박리 점착력이 감소하였다. 광경화 특성을 갖는 다관능성 단량체의 탄소 이중결합 관능성이 증가할수록 자외선 조사 후 가교밀도가 증가하여 박리 점착력이 감소하였고 박리 후 웨이퍼 표면에 남게 되는 점착제 잔사물도 크게 감소하였다. 6관능성 단량체를 20 phr 포함하는 광가교형 감압점착제가 자외선 조사 전 점착력이 높고, 자외선 조사 후 박리 점착력이 낮고, 박리 후 웨이퍼 표면에 남게 되는 점착제 잔사물이 가장 적었다.

• 한국인쇄학회지
• /
• 제22권1호
• /
• pp.29-38
• /
• 2004

With increasing interests in environment matters over the world, incessant efforts to develop products which meet these environmental requirements have been made also in paint industry. Among the efforts in this field, UV(Ultra Violet) curing system is focused as one of most potential system. It is because this system not only proved to be environmentally friendly compared with heat curing system or other system but also has economical merit of smaller facility, less energy consumption, and better productivity. Superior properties in many application is surely one of its dominant merit. With these advantage UV system is applied to a variety of industrial fields and expected to have continuous growth in the future. As practical application of UV system has shown lasting progress, R&D on basic material of this system keeps up with. This is a study on photo-initiator that is a fundamental substance in UV curing method and amine, its aid for better effect. After reviewing on them in the aspects of function, economy, and stability, optimal foumula is pursued through experiments when applied to real products.

• 소성∙가공
• /
• 제18권4호
• /
• pp.310-316
• /
• 2009

Micro lens array(MLA) is widely used in information technology(IT) industry fields for various applications such as a projection display, an optical power regulator, a micro mass spectrometer and for medical appliances. Recently, MLA have been fabricated and developed by using a reflow method having the processes of micro etching, electroplating, micro machining and laser local heating. Laser thermal relaxation method is introduced in marking of microdots on the surface of densified glass. In this paper, we have proposed a new direct fabrication process using UV laser local thermal-expansion(UV-LLTE) and investigated the optimal processing conditions of MLA on the surface of negative photo-resist material. We have also studied the 3D shape of the micro lens obtained by UV laser irradiation and the optimal process conditions. And then, we made chrome mold by electroplating. After that, we made MLA using chrome mold by hot embossing processing. Finally, we have measured the opto-physical properties of micro lens and then have also tested the possibility of MLA applications.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1939-1943
• /
• 2008

Deformation of a mold is measured and analyzed in alignment and curing processes of UV-Imprint Lithography. We are focused on mold deformation caused by a UV resin, which is laminated between a mold and a target glass-panel. The UV resin is viscous in case of liquid state, and the resin will be solidified when being exposed by the ultra-violet light. The viscosity of the resin causes shear force on the mold during the alignment process. Moreover, the shrinkage during phase change from liquid to solid may cause residual stress on the mold. The experiments for measuring temperature and strain are made during alignment and curing process. Strain-gages and thermocouples are used for measuring the strain and variation of temperature on several points of the mold, respectively. The deformation of mold is also simulated and analyzed. The simulation results are compared with the experiments. Finally, sources of alignment errors in large area UV-nanoimprint lithography are discussed.

• 한국도로학회논문집
• /
• 제13권4호
• /
• pp.93-101
• /
• 2011

본 연구는 칼라아스팔트 포장의 표면 색채를 보수하기 위하여 사용되는 칼라코팅 공법에 대한 평가를 버스전용 차선에서 실시한 실내외 시험에 관한 연구이다. 교통과 시간의 경과에 따라 칼라아스팔트 표면은 탈변색, 마모가 발생하여 표면 색상에 손상이 발생하게 된다. 총 9개 공법에 대하여 평가를 실시하였다. 실내시험 항목으로 UV시험, 부착성능 및 타버시험장치를 사용하여 내마모시험을 실시하고 현장시험으로는 BPT를 이용한 미끄럼저항시험과 현장 육안조사를 실시하였다. 실험 결과 각 공법들은 서로 다른 공학적 특징을 보였는데 이러한 결과는 각 공법에 사용한 주재료와 관련이 있는 것으로 판단하였다. 고무에폭시를 주재료로 사용한 공법이 평가된 공법 중에서 만족할만한 결과를 보였으나 100일 후 현장 추적조사 결과 모든 공법이 탈변색, 마모, 벗겨짐 현상이 심하게 발생하여 코팅공법으로 적합하지 않으며 추후 적용하기 위해서는 연구가 필요한 것으로 나타났다.

• 한국전기전자재료학회논문지
• /
• 제24권12호
• /
• pp.996-1001
• /
• 2011

A bushing is very important because it must supply the high voltage to the power equipment. Generally, the surface of bushing is contaminated with rain, dust, salt and others. A bushing with contaminations at air are serious problem in insulation. Therefore, it is important to understand the inspection and diagnoses of the safety. The ultra-violet rays(UV) camera has attracted interest from the view point of easy judgement. In this paper, we will report on the corona discharge characteristics on bushing model with contaminations. Also, UV images of discharge in air are analyzed using prototype UV camera of Korea. These results are studied at both AC and DC voltage under a non-uniform field.

• Journal of Photoscience
• /
• 제7권2호
• /
• pp.53-58
• /
• 2000

We performed the cloning of a chalcone synthase (CHS) gene, the key enzyme in the anthocyanin biosynthesis, from the cDNA library constructed with grape suspension cells irradiated UV-B. The PCR fragment was used to cloning the CHS gene. One CHS cDNA clone containing an open reading frame and a partial stilbene synthase (STS)cDNA, the stilbene-type phytoalexin, were isolated. The CHS cDNA clone (VCHS) showed 87% sequence homology with VvCHS (V.vinifea) and 72.3% identity with VSTSY(V.vinifea). its amino acid sequences were longer than any other CHS genes as 454 residues. Two genes were weakly expressed in white light irradiated cells, but highly induced in UV-B irradiated condition during 32 hours. Interestingly, the STS was quickly and abundantly expressed from 2 hours when supplemented with jasmonic acid (JA) and the maximum expression was observed at 4 hours and then gradually decreased. But, the additional UV-B or white light quickly degraded the STS expression than only JA treated grape suspension cells. The CHS also was rapidly induced with JA and the synergistical effect was observed at the addigional light treatment of UV-B or white light. These results are indicated that CHS and STS have different response mechanisms against the environmental stresses.

• Environmental Engineering Research
• /
• 제22권4호
• /
• pp.426-431
• /
• 2017

Some phototoxicity of titanium dioxide nanoparticles ($TiO_2$ NPs) has been reported in recent years in studies with fish embryos or larvae. However, it is necessary to focus on the potential effects of embryonic exposure due to irreversible abnormalities and mortalities observed in sac-fry, and to expand various fish embryos to generate multiple test species. The aim of this study was to evaluate the effects of $TiO_2$ NPs under different irradiation conditions in exposed Oryzias latipes (O. latipes) at the embryonic and sac-fry stages. The effects of different irradiation conditions were observed using ultra-violet (UV) and visible light, and the corresponding effects were monitored by determining cumulative mortality and abnormality. O. latipes were exposed for 8 d to 0, 1, 5, 10, or 50 mg/L $TiO_2$ NPs under UV ($4,818.86mW/m^2$ at the bottom of clear vials) or visible light, after which the embryos were transferred to NP-free embryo-rearing solution until 16 days post fertilization (dpf). Abnormalities of embryos and sac-fry increased at high $TiO_2$ NP concentrations under UV irradiation, compared to control samples treated with visible light or UV irradiation alone. This work provides information regarding the phototoxicity of $TiO_2$ NPs using O. latipes at the embryonic and sac-fry stages.