• Physical Therapy Korea
• /
• v.16 no.4
• /
• pp.37-43
• /
• 2009

This study compared the electromyographic activities and input performance of computer operators using a computer mouse and a trackball. Muscle activities were assessed at the upper trapezius (UT), middle deltoid (MD), extensor digitorum (ED), and first dorsal interosseous muscle (FDI). Twenty-six healthy subjects were recruited, and the test order was selected randomly for each subject. The task set was to click moving targets on a Windows program. The EMG amplitude was normalized using the percentage of reference voluntary contraction for UT and MD and the percentage of maximal voluntary contraction for ED and FDI. To analyze the differences in EMG activity, a paired t-test was used. UT muscle activities were significantly greater when the computer mouse was used (p<.05). FDI muscle activities were significantly greater when the trackball was used (p<.05). Using a trackball can reduce the load on the UT during computer work and help to prevent and manage work-related musculoskeletal disorders.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.6 no.1
• /
• pp.78-82
• /
• 2010

The feeder pipe of Main Primary Heat Transfer System in Wolsong Nuclear Power Plant was inspected by the Ultrasonic Phase Array technique in 2010. It is the first time to apply this method to the construction at Nuclear Power Plant in Korea. The time required for UT technique is less than RT method. The UT method doesn't need to evacuate personnel who works nearby inspecting area and doesn't need to wait developing of film. For these reasons, the UT method is the fastest method among the volumetric inspections. As a result of the examination, it became clear that main defect of the feeder pipe is the Lack of fusion in the welded area. Moreover, the rate of defect was reduced gradually as improvement of welder's skill. If welding machine has problem, the defect has tended to same pattern(occurred same position in the welding area) but these defects were founded without specific rules. For these reasons, the creation of defect is dependent on the skill of worker not on the automatic welding machine. This evaluation of defect signal and collecting data would be useful to further examination in ISI.

• Journal of Biomedical Engineering Research
• /
• v.7 no.2
• /
• pp.113-116
• /
• 1986

We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies.

• Journal of Astronomy and Space Sciences
• /
• v.37 no.1
• /
• pp.29-34
• /
• 2020

On 21 August 2017, during 16:49 UT and 20:02 UT period, a total solar eclipse started. The totality shadow occurred over the United States in time between ~17:15 UT and ~18:47 UT. When the solar radiation is blocked by the moon, observations of the ionospheric parameters will be important in the space weather community. Fortunately, during this eclipse, two Swarm satellites (A and C) flied at about 445 km through lunar penumbra at local noon of United States in the upper ionosphere. In this work, we investigate the effect of the solar eclipse on electron density, slant total electron content (STEC) and electron temperature using data from Swarm mission over United States. We use calibrated measurements of plasma density and electron temperature. Our results indicate that: (1) the electron density and STEC have a significant depletion associated with the eclipse; which could be due to dominance of dissociative recombination over photoionization caused by the reduction of ionizing extreme ultraviolet (EUV) radiation during the eclipse time (2) the electron temperature decreases, compared with a reference day, by up to ~150 K; which could be due to the decrease in photoelectron heating from reduced photoionization.

• Physical Therapy Korea
• /
• v.20 no.3
• /
• pp.27-35
• /
• 2013

The aim of this study was to compare the electromyographic (EMG) activity levels of the scapular upward rotators [upper trapezius (UT), lower trapezius (LT), and serratus anterior (SA)] and other scapular muscles [posterior deltoid (PD), levator scapulae (LS), and infraspinatus (IS)] during isometric lower trapezius exercises. Twenty males with no medical history of shoulder pain or upper extremity disorders were recruited for this study. EMG activity was recorded from the UT, LT, SA, PD, LS, and IS while subjects performed three different exercises: Prone arm lift (PAL), Backward rocking diagonal arm lift (BRDAL), Modified Prone Cobra (MPC). One-way analysis of variance (ANOVA) was used to determine any significant differences among the three exercises. A lower relative activation of UT, LT, and SA was seen with the MPC than with the other exercises (p<.05). The relatively lower activation of the UT identified, the MPC exercise as the preferred choice for preferential strengthening the LT (p<.05). However, a higher activation in the PD, LS, and IS occurred with the MPC than with the other exercises (p>.05). The recruitment pattern of synergist varied depending on the exercise posture. These findings suggest that exercise posture is an important factor in the selection of strengthening exercise for weak muscle.

• Corrosion Science and Technology
• /
• v.11 no.5
• /
• pp.173-178
• /
• 2012

To manage the wall thinning of carbon steel piping in nuclear power plants, the utility of Korea has performed thickness inspection for some quantity of pipe components during refueling outages and determined whether repair or replacement after evaluating UT (Ultrasonic Test) data. When the existing UT data evaluation methods, such as Band, Blanket, PTP (Point to Point) Methods, are applied to a certain pipe component, unnecessary re-inspecting situations may be generated even though the component does not thinned. In those cases, economical loss caused by repeated inspection and problems of maintaining the pipe integrity followed by decreasing of newly inspected components may be generated. EPRI (Electric Power Research Institute) in USA has suggested several statistical methods, TPM (Total Point Method), LSS (Least Square Slope) Method, etc. to distinguish whether multiple inspecting components have thinned or not. This paper presents the analysis results for multiple inspecting components over three times based on both NAM (Near Area of Minimum) Method developed by KEPCO-E&C and the other methods suggested by EPRI.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.8
• /
• pp.1908-1916
• /
• 2015

In reacting to disasters, rationality only relies on human experience leads to huge lose. Accordingly, in order to prepare for national emergency due to diverse and complicated disaster, the government needs to transfer into cooperation-based disaster management system using smart UT. Hence, this paper analyzes current disaster management systems' problems and considers resolution in fulfilling the requirement in safety. Then, it suggests service structure for technically effective UT utilization and considers u-Gov's role in preparing unpredictable disasters.

• Corrosion Science and Technology
• /
• v.12 no.4
• /
• pp.185-190
• /
• 2013

In the present study, $Ni-TiO_2$ composite coatings were electrodeposited in a sulfamate bath containing $TiO_2$ particles. The influence of the ultrasonic treatment on the co-deposition of $TiO_2$ particles in the coating and the hardness of the electrodeposited $Ni-TiO_2$ composite has been investigated. Three different ultrasonic treatments (pretreatment before the electrodeposition (pre-UT), pretreatment + applied during the electrodeposition (UT), and the electrodeposition without the ultrasonic treatment (w/o UT)) were performed. The $Ni-TiO_2$ composite coatings are characterized using scanning electron microscopy (SEM), image analyzer, and hardness tester. Comparison of results indicates that the volume fraction is more important factor than the agglomerated particle size in terms of the strength improvement, and the strength of the electrodeposited $Ni-TiO_2$ composite coatings is enhanced with pre-UT condition.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.1
• /
• pp.96-107
• /
• 2014

Tracking the tactical object is a fundamental affair in network-equipped modern warfare. Geodetic coordinate system based on longitude, latitude, and height is suitable to represent the location of tactical objects considering multi platform data fusion. The motion of tactical object described as a dynamic model requires an appropriate filtering to overcome the system and measurement noise in acquiring information from multiple sensors. This paper introduces the filter suitable for multi-sensor data fusion and tactical object tracking, particularly the unscented transform(UT) and its detail. The UT in Unscented Kalman Filter(UKF) uses a few samples to estimate nonlinear-propagated statistic parameters, and UT has better performance and complexity than the conventional linearization method. We show the effects of UT-based filtering via simulation considering practical tactical object tracking scenario.

• Journal of the Korean Society of Physical Medicine
• /
• v.10 no.2
• /
• pp.9-16
• /
• 2015

PURPOSE: The objective of this study was to identify the effects of shoulder abduction strength and EMG activities of the selected scapular and shoulder muscles during isometric shoulder abduction. METHODS: Thirty-four healthy young females were recruited for this study. Surface EMG equipment with inline force sensor was used to determine the shoulder abductor strength and the activity of the serratus anterior (SA), upper trapezius (UT), lower trapezius (LT), and middle deltoid (MD) during three shoe heel height conditions: (1) barefoot, (2) 3-cm shoe heel height, and (3) 7-cm shoe heel height. RESULTS: Isometric shoulder strength showed statistically significant difference among the conditions (p<0.05), and post-hoc test showed lower strength during the 7-cm condition ($49.98{\pm}17.56kg$) than during the barefoot ($44.97{\pm}20.15kg$) and 3-cm conditions ($36.59{\pm}17.07kg$). Furthermore, EMG activities of the SA, UT, and MD appeared to be statistically significantly different among the conditions, with lower values in the 7-cm condition compared to the barefoot condition (p<0.05). EMG ratios (MD/UT and SA/UT) were lower during the 7-cm condition than during the barefoot condition (p<0.05). CONCLUSION: These findings suggest that isometric shoulder abduction strength and EMG activities of scapular and shoulder muscles may be adversely changed with increasing shoe heel height.