• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2609-2612
• /
• 2003

This paper describes a 64 channel signal generator/analyzer module that is useful for verification and testing of digital circuits. It can perform logic analyzer function and signal generator function at the same time. The 64 Channel module is implemented with single FPGA chip for miniaturization, and an USB interface is used to increase portability of the module. Multiple modules can be used in parallel for the verification of large scale circuits. Moreover, since the module is implemented as a PC based system, one can configure convenient GUI(Graphic User Interface) environment.

• Journal of Broadcast Engineering
• /
• v.22 no.5
• /
• pp.665-670
• /
• 2017

In this paper, we propose an implementation technology for an active attenuator with the maximum attenuation of -110dBm in the frequency band of 50MHz to 2,15GHz. It provides USB interface to connect to PC providing GUI that sets signal frequency and attenuation step of minimum 1dB. As it attenuates the input signal level down to -110dBm, circuit and equipment design technologies are applied to control both internal and external electro-magnetic noises.. Through the performance test, it is assured that it attenuates input signal level down to -110dBm for the input signal levels of -10 to -30dBm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.8
• /
• pp.1721-1728
• /
• 2009

Future computer interface was interchanged with person's hands or eyes from traditional mouse. In this research, I developed glove type radio mouse using gyro sensor that is replaced mouse cursor movement with persons's hand movement. Introducing a mobile sensor network technology based on bluetooth, radio mouse connected to computer system wirelessly for overcoming wire mouse's activity restrictions. Also, using USB port interface made be easy to install and to use. Developed glove type radio mouse was confirmed in the possibility of using as well as an input pointing device for presentations or games that needed many kinds of user interaction.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.505-508
• /
• 2000

본 논문에서는 16채널 혹은 8채널의 센서를 통해 들어오는 저주파대역의 아날로그 신호를 수집하고. 수집된 데이터를 실시간으로 처리하기 위한 고속의 신호처리 기능이 결합된 통합 DSP (Digital Signal Processor)시스템을 구현하였다. 구현된 시스템은 휴대가 용이하도록 소형으로 설계되어 있으며 노트북 등의 이동형 장비에 활용되도록 USB 인터페이스를 채택하였으며, 장치간의 네트워크 구성이 가능하도록 Ethernet 인터페이스를 추가하였다 Digital Signal Processor는 Texas Instrument 사의 TMS320C6701 부동소수점 연산방식의 고성능 DSP를 사용하여 16채널의 실시간 신호 분석이 가능하게 하였으며, ICP 센서 구동용 전류 공급부를 내장하여 센서 선택의 폭을 넓히었고, programmable gain amplifier인 PGA202증폭기를 사용하여 입력신호가 작을 경우 최대 1000배, 즉 60dB까지 입력신호를 증폭하여 수집 및 분석할 수 있다. 200kSPS의 샘플링 레이트와 16bit resolution을 가지는 AD976 A/D converter를 사용하여 채널당 0～6kHz의 신호대역폭을 가지며,differential 입력시 8 채널,single ended 입력시 16 채널의 입력 신호의 수집 및 분석이 가능하다. Windows 응용프로그램에서는 사용자가 원하는 입력신호 및 스펙트럼 실시간 분석, 입력신호 기록 및 저장, RPM 측정 및 분석, 외부 트리거 및 레벨 트리거를 이용한 입력신호 제어와 수집된 데이터를 바탕으로 원하는 제어가 가능한 응용프로그램 제작에 활용될 라이브러리가 포함된다.

• Journal of Biomedical Engineering Research
• /
• v.31 no.3
• /
• pp.251-257
• /
• 2010

This paper reports a noble instrument that helps physically disabled people to access computers. There have been numerous attempts to develop such a methodology, but most of them require an additional space for workstation often including access program installation. The additional space also needs to be carefully designed to consider each specific disabled area. This study aims to develop a system that removes the spacial limitation by putting the integrated computer interface using the wheelchair controller. The implementation of the computer workstation is performed by utilizing an USB interface. The developed equipment will take an important role to support various social lives for the users and eventually to improve their quality of life.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.311-314
• /
• 2003

This paper describes a virtual instrument system with faulty sensor reconstruction mechanism based on personal computer. This system consists of sensor control board using 16bit RISC machine, error signal reconstruction algorithm based on principal component analysis and auto tunned GUI interface according to the attached sensors. USB module is used for fast communication between PC and sensor controller. To show the veridity of the proposed system, the proposed system was applied to the developed sun tracker with 8 solar sensors.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.9
• /
• pp.602-606
• /
• 2015

This paper presents a ZigBee wireless communication system for remote diagnosis in overhead distribution power lines. The system is divided in three parts in the functional aspect - a host computer module, a remote controller module and a diagnostic system module. The host computer module designed as USB interface transmits control signals and receive data measured by sensor. The remote controller module operates the diagnostic system. Diagnostic system module communicates with internal main controller and host computer USB. Multiple communication channel is adopted for simultaneous operations of several diagnostic system. Dedicated protocol for each module is developed. The system is designed with a focus on low cost and small size suitable for lightweight and small diagnostic system.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.1
• /
• pp.97-110
• /
• 2019

Recently, the 4th Industrial Revolution has been emerged and various products are developed and commercialized in preparation of the communication failure. Many solutions are underway in Back-Up Network for IDC Servers, but not in the personal or sensor for low-power system use. Therefore we used the OpenWRT Firmware in Raspberry Pi which can be easily obtained in online market, and it created a low-power load balancer. Therefore, we developed the device that uses LTE Antenna based on USB Interface for communication fault notification and important data. The equipment used in this paper is easy to buy in online shop for anyone. Also, it can be applied in other vendors' boards by using USB. We hope that this paper will contribute to the stability of individual sensor networks.

• Journal of Aerospace System Engineering
• /
• v.13 no.4
• /
• pp.1-9
• /
• 2019

Integration of satellites with diverse missions, such as broadcast-communication, earth, meteorologicaland marine observations, and navigation, is vulnerable. The problems of the currently constructed ground station network were analyzed by constructing the test environment. Based on this, we designed a network that was capable of operating multiple satellites by one ground station. In addition, we proposed an interface and network configuration method with domestic and foreign ground stations. The network linking the domestic and foreign ground stations was composed of KREONET (Korea Research Environment Open Network) and GLORIAD (Global Ring Network for Advanced Application Development) of the KISTI(Korea Institute of Science and Technology Information). The internal network consists of VPN (Virtual Private Network), DMZ(De-Militarized Zone), and 1-way USB and so forth. By constructing the network by using the proposed method, harmful data, such as virus inflow and infection, can be blocked.

• Journal of Internet of Things and Convergence
• /
• v.8 no.3
• /
• pp.63-68
• /
• 2022

Due to COVID-19, many paradigm shifts in existing manufacturing facilities and the expansion of non-face-to-face services are accelerating worldwide. A representative technology is digital twin technology. Such digital twin technology, which existed only conceptually in the past, has recently become feasible with the construction of a 5G-based network. Accordingly, this paper designed and implemented a part of the USB process to enable digital twins based on OPC UA communication, which is a standard interlocking structure, between real object objects and virtual reality-based USB process in accordance with this paradigm change. By reflecting the physical characteristics of real objects together, it is possible to simulate real-time synchronization of these with real objects. In the future, this can be applied to various industrial fields, and it is expected that it will be possible to reduce costs for decision-making and prevent dangerous accidents.