• Journal of Korea Multimedia Society
• /
• v.15 no.3
• /
• pp.345-355
• /
• 2012

The WiMedia Alliance has specified a Distributed Medium Access Control (D-MAC)/WUSB protocol based on UWB for high speed wireless home networks and WPANs. In this paper, we propose a novel SoQ-based cooperative communication protocol adaptive to current UWB link transmission rate and QoS measure. The proposed SoQ-based cooperative communication protocol has compatibility with current WiMedia D-MAC/Wireless USB standard and is executed at each device according to a SoQ-based Relay Node Selection (RNS) criterion.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.653-655
• /
• 2013

This paper is the study of Multiple External Storage Configuration for the Android based Set-top Box system. Because of Mobile OS, Android has limitation in media streaming, recording and playing for Set-top box function with only support external storage device Micro-SD card. In this paper, we research for the Multiple External Storage configuration for external disk drive, USB Memory, SD card. in Android System with Multi-Volume Management system implementation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.111-113
• /
• 2021

USB storage devices, which are represented by removable storage media, are widely used even nowadays when cloud services are common. However, since they are cases where hidden areas are created and exploited in USB storage devices. This research is needed to detect and analyze them from an Anti-forensic point of view. In this paper, we analyze a program that can be exploited as Anti-forensic because it can create a hidden partition and store files there, and the file system created by it from a digital forensic point of view.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.205-207
• /
• 2021

The way to develop an IoT device is to mount the sensor required by the application on a platform such as Arduino or Raspberry Pi, and write the sensor driver and application. At this time, if the driving driver for the sensor has already been written and the application can access the driver as a standardized API, then Plug&Play of the sensor will be possible. The old way to do this is because the sensor interface is too complicated to use on the current platform. In this paper, when a standardized sensor and driver with a USB terminal are plugged into the Raspberry Pi, we propose a method for automatically installing the driver. Application developers can get sensor values through Linux's file access API without worrying about sensor drivers. The proposed technique is currently being implemented on Raspberry-Pi.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.9C
• /
• pp.652-660
• /
• 2008

Applications running under embedded systems require various device drivers designed for different types and versions of the OS to manage resources effectively. In this paper, an automated device driver generator system which can generate the device drivers to be used in newer versions the target OS is proposed. In the proposed system, the structures of device drivers of specific OS are designed in the templates and stored in a library, and the target device drivers are generated by adding codes to the stored templates. Once device drivers are generated, they are registered into the kernel. The experimental results show that data transfer time has been slightly increased when compared against manually created drivers for TFT-LCD driver, USB interface keyboard/mouse driver, and AC'97 controller drivers. The code size for the generated drivers after compilation has also been increased slightly when compared with manually designed device drivers.

• Journal of Advanced Navigation Technology
• /
• v.13 no.4
• /
• pp.503-508
• /
• 2009

In this paper, we have designed the auxiliary input device which based on hand-motion recognition. It is aimed at some individually specified person such as the disabled, rehabilitation patient, and the aged. The gyro sensor is used to recognize the hand-motion in 3D space, and communication bandwidth for transceiver is also set to the 2.4GHz. Prototype board includes a set of modules; Gyro sensor, RF transmitter/receiver, MCU for signal processing and USB connector etc. Some experiments are conducted so as to verify the prototype, and as a result, mouse-based curser motion as well as program control are well operated just same as the design specification.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.6
• /
• pp.1-8
• /
• 2013

In this paper, we design and implement a firmware for low-cost small PCR devices. To minimize machine code size, the proposed firmware controls real-time tasks simultaneously only with support of the hardware interrupt, but without support of the operating system program. The proposed firmware has the host-local structure in which the firmware receives operation commands from PC and sends operation results to PC through usb communication. We implement a low-cost small PCR device with the proposed firmware loaded on microchip PIC18F4550 chip, and verify that the implemented PCR device significantly reduces cost and volume size of existing commercial PCR devices with a similar performance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.11
• /
• pp.2031-2038
• /
• 2008

A small-area and high-speed authentication/security processor (WUSB_Sec) IP is designed, which performs the 4-way handshake protocol for authentication between host and device, and data encryption/decryption of wireless USB system. The PRF-256 and PRF-64 are implemented by CCM (Counter mode with CBC-MAC) operation, and the CCM is designed with two AES (Advanced Encryption Standard) encryption coles working concurrently for parallel processing of CBC mode and CTR mode operations. The AES core that is an essential block of the WUSB_Sec processor is designed by applying composite field arithmetic on AF$(((2^2)^2)^2)$. Also, S-Box sharing between SubByte block and key scheduler block reduces the gate count by 10%. The designed WUSB_Sec processor has 25,000 gates and the estimated throughput rate is about 480Mbps at 120MHz clock frequency.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.465-468
• /
• 2014

The image processing device sold by the market, which increases the comfort of the driver Around-View of the camera. This system while driving or when parked, came about to prevent accidents caused by driver error or disable the visibility of the system. However, it did not spread widely to the driver due to the problem of the high installation cost and complex installation process from the system for easy operation. Due to problems such as first, expensive equipment and second, the development environment is difficult and third, inconvenient installation process, it is not out because of the prohibitively high cost burden and difficult development environment, programmers and operators. I think if this is solved even one problem of this system would be able to access the user are a little more affordable. In this paper The AVM(Around-View Monitoring) system is proposed, the two problems that minimize expensive equipment, the installation process is inconvenient problem of the three aforementioned systems. Solved the problem caused by a lot of the cost by using low-cost USB device, and a rear camera. Was developed to facilitate the installation is possible by considering the inconvenient installation. Reducing the price paid by consumers because of the system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.2
• /
• pp.191-198
• /
• 2014

As an NMEA 2000 is a standard for communicate to other electronic equipment, it implemented a Universal gateway based on this ship's network. To implement a NMEA 2000 based Universal gateway, it is porting a NMEA 2000 stack source and CAN device driver source to board, and then it connected a board that equip with various communication protocol(CAN, RS232, USB, Ethernet port). To verify converted ship's data to a developed gateway, it connected pc based simulater program and monitoring program to a developed board. so we can see a ship's data through NEMA 2000 network. We verified a gateway performance and analyzed a generated ship's data from simulator program through a monitoring program that was connected a gateway and NMEA 2000 network. so it was designed, implemented to allow monitoring through utilizing a communication method that user wants.