• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.187-190
• /
• 2009

Recently, automotive companies have invested in vehicle weight reduction and clean car development because of oil price rises and environmental problems. In particular, USA car makers have developed the vehicle spending 1 liter per 34km complying with PNGV(Partnership for a new generation of vehicle) and Europe car makers have developed the vehicle spending 3 liters per 100km. The USA government announced "The green car policy" in order to boost production of more fuel effective cars in 2009. According to the policy, it will be restricted to sell the car which spends more than 1 liter per 14.9km by 2020. To satisfy the current situations on automotive market, hydroforming technology has widely adapted vehicle structures such as engine cradle, chassis frame, A pillar, radiator support, etc. However, automotive companies have to consider formability and performance to improve and maximize the benefit from this technology in advance of detail design. The paper deals with one of the vehicle weight reduction methods using tube hydroforming technology and platform commonality in front suspension. FEA simulation is also introduced to evaluate hydro-formability and NVH performance at the beginning of design stage which is the best way to reduce the failure cost.

• 한국유기농업학회지
• /
• 제9권1호
• /
• pp.1-16
• /
• 2001

With increasing global concern that intensively synthetic-chemical based farming systems accelerated the decline in environmental quality, the sustainability of modem agriculture became the subject of great concern. It is well known that the movement of Community Supported Agriculture(CSA) has been contributed significantly to the development of organic agriculture in USA and Japan. It was supposed that CSA could be one of the best way to promote the movement of organic agriculture since there is little reliability on the organically grown food by consumer. In this paper it was focussed to study the movement of CSA in USA and Europe in order to provide an idea for establishment and movement of CSA in Korea to support the organic agriculture. In a CSA system, the farmer grows food for a group of shareholders who pledge to buy a portion of the farm's crop that season. This arrangement gives growers up-front cash to finance their operation and higher prices for produce, since the middleman has been eliminated. For most shareholder for CSA saving money is a secondary consideration, but fresh safe products and environmentally sound farming system. People become shareholder of CSA since they expect an organic farming which can ; \circled1protect the environment, minimize pollution, promote health, \circled2replenish and maintain long-term soil fertility by providing optimal conditions for soil biological activity, \circled3maintain diversity within the farming system and its surroundings and protect plant and wildlife habit, \circled4recycle materials and resources to the greatest extent possible within the farm and its surrounding community, \circled5maintain the integrity of organic food and processed products through each step of the process from planting to consumption, \circled6develop and adopt new technologies with consideration for their long range social and ecological impact. In all CSAs, the farmer develops a crop plan and a budget, which details costs for a growing season, including fair wages for the farmers. Experienced Information on increasing shareholder retention, the future of CSA, and getting started such as ideas for ongoing marketing, printed materials that set realistic expectations, working members, production, pick-up and delivery, setting prices, and receiving feedback were also briefly introduced.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2001년도 Proceedings of 6th International Joint Symposium on Microeletronics and Packaging
• /
• pp.45-47
• /
• 2001

Due to pressure from threatened legislation in Europe, consumer and governmental pressure in Japan, and glob머 market considerations in the US, there is a rapidly growing interest in lead-free solderinger, Although the move to lead free soldering seems inevitable, many problems will arise in production assembly. It is generally acknowledged that the lead-free solders available offer a much s smaller process window than lead/tin, related mainly to the higher soldering temperatures which naturally result from increases of liquidus temperatures of at least 300 C. However, raising reflow temperatures from the current 220-2300 C to 250 2600 C will lead to problems with the boards and components as well as i increasing oxidation effects. There is a need to keep reflow temperatures low without reducing solderablity. Some results on benefits of inert atmospheres are discussed in this paper. For example, testing in a nitrogen atmosphere, with 300 ppm oxygen, by the N National Physical Laboratory (NPU has revealed clear benefits for ine$\pi$mg lead-free alloys, by restoring the solderability to lead/tin levels, by enabling lower soldering temperatures. However, there has been little testing over a range of oxygen levels in nitrogen and this is an important issue in determining n nitrogen supply and oven costs. Some results are reported here from work by NPL conducted for BOC in w which solderability was evaluated for tin기ead and tin/silver/copper eutectic a alloys in a wetting balance over a range of oxygen levels form 10 ppm to 21% ( (air). The studies confirm that acceptable wetting times occur in inert atmospheres a at soldering temperatures 20 to 300 C lower than are possible in air.

• 대한치과보철학회지
• /
• 제39권2호
• /
• pp.220-229
• /
• 2001

This study was performed to evaluate the fracture resistance of three improved die stone materials according to water/powder ratio. There are lots of handling conditions which affect the physical properties of improved dental stone, and it's well known that the water/powder ratio significantly affect the strength of die stone. If water/power ratio was incorrect, following disadvantages were showed : (1) susceptibility to dimensional change due to abrasion, (2) limited reproduction of fine detail, (3) lack of strength. The maxillary master casts were made of additional silicone impressions(Exaflex, GC America. Inc. USA). Three type IV die stones such as Fuji Rock (GC Europe Intreleuvenlaan, Leuven, Belgium), Velmix(Kerr, Manufacturing company, USA), and Crytal Rock( Maruishi Gypsum Co. Ltd, Japan) were tested. A total of 160 casts were prepared, separated, and tested on the Instron Testing Machine(Model 4201, Co. USA). The obtained results of this study were as follows : 1. Fuji Reck and Velmix less 3ml than the water/power ratio of manufacturer's instruction showed the highest resistance to fracture. According to increasing water/powder ratio, fracture resistance was significantly increased(P<0.05). Crystal Rock showed the highest fracture value when it was mixed with the water/power ratio of manufacturer's instruction. 2. Water/powder ratio of the manufacturer's instructions and less 3ml than that showed lower fracture value of hand mix than that of vacuum mix. Water/powder ratio of more 3ml, 6ml than manufacturer's instructions was not significantly different between hand mix and vacuum mix(p>0.05). 3. Velmix had the highest viscoelastic value among three die materials when it was mixed with the manufacturer's instruction. Viscoelasticity was decreased according to increasing water/powder ratio.

• World Technopolis Review
• /
• 제4권2호
• /
• pp.62-78
• /
• 2015

The importance of university technology transfer has widely been brought to the center of attention over the last decades. Research and practice thereby often concentrate on issues related to patenting and licensing or entrepreneurship but abstract away from relationship- and network-focused initiatives. In this paper, we argue that efforts to systematically develop close, long-term collaboration partnerships - although complex and resource intensive - are likely to be more beneficial for both universities and industry in the long run. Drawing on data derived from interviews with technology transfer executives of 22 leading European and U.S. universities, we analyze and discuss well-established practices of network and relationship management and their possible impact on technology transfer success. Our findings indicate that dedicated relationship management approaches can yield a sustainable competitive advantage for universities. We thereby shift the focus away from transaction-orientation towards more forward-looking relationship-centric approaches and discuss their institutionalization in great detail.

• 한국식물생명공학회:학술대회논문집
• /
• 한국식물생명공학회 2005년도 추계학술대회 및 한일 식물생명공학 심포지엄
• /
• pp.3-8
• /
• 2005

Torenia hybridacv. Summerwave Blue and Violet mainly produce delphinidin. Down regulation of their flavonoid 3'-hydroxylase and flavonoid 3',5'-hydroxylase (F3'5'H) genes and over expression of rose or pelargonium dihydroflavonol 4-reductase (DFR) cDNA yielded pelargonidin-based bright pink flowers. Nierembergia cv. Fairybells lack pink color as they produced only delphinidin and flavonols. Pelargonidin-based pink flowers were achieved by down regulation of F3'5'H and flavonol synthase genes and over expressing rose DFR cDNA. Introduction of petunia F3'5'H and DFR cDNAs into white carnations deficient in DFR activity produced violet carnations, which arc now commercialized in the USA, Canada, Australia, Europe and Japan. Introduction of pansy F3'5'H and iris DFR cDNAs and down regulation of rose DFR gene produced rose flowers which accumulates delphinidin imparting novel violet color.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2004년도 총회 및 춘계학술발표회
• /
• pp.158-161
• /
• 2004

Chlorinated aliphatic hydrocarbons (CAHs) especially perchlorethylene (PCE) and trichlooethylene (TCE) are common groundwater contaminants in Korea. PCE and TCE were often reductively dechiorinated in an aquifer. Several isolates dechlorinate PCE to TCE or cis-1,2 dichloroethylene (c-DCE) were obtained from contaminated and pristine sites in USA and Europe. However in Korea, no information on indigenous microorganism being involved in reductive dechlorination of PCE and TCE is available and different dechlorinating microorganisms might be reside in Korea, since geochemical, and hydrogeological conditions are different, compared to those in the other sites. So we evaluate that: 1) if reductive dechlorinating microorganisms are present in PCE-contaminated site in Korea, 2) if so, what kinds of microorganisms are present; 3) to what extent PCE is reductively dechlorinated. As a results in some PCE-contaminated aquifers in Korea other dechlorinating microorganisms but Dehalococcoides ethenogenes may be responsible for PCE dechlorination. More detailed molecular works are required to evaluate that different dechlorinating microorganisms would reside in Korea.

• 한국공작기계학회논문집
• /
• 제16권3호
• /
• pp.56-63
• /
• 2007

Modern diesel vehicle has to comply with the EURO IV, V regulation with low level of particulate matter and smoke emission Moreover, emission standards of each countries are becoming stringent in advanced countries such as USA and Europe. Because Bio-diesel is similar to diesel fuel, it is essential to judge the environmental and health effects deriving from the use of Bio-diesel in diesel engine. The deterioration characteristics of emission in accordance with aging vehicles must be regulated for Bio-diesel. Therefore, under 1200 driving hours, 220,000km driving distance condition and full load, the deterioration characteristics of emission were estimated. We could reduce sulfur contents of fuel, particulate matter and smoke emission by using Bio-diesel and conform the influence of engine performance, emission, and fuel consumption by Bio-diesel deterioration

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.705-708
• /
• 2007

RDF means Refuse Derived Fuel, it is made pellets with combustible materials in municipal waste and RDF use a renewable energy instead with natural coal. RDF Technology is a essential one to treat municipal waste steadily and secure a energy source in Korea. Already RDF Technology commercialize in Japan, USA, Europe and there are many of RDF production plants and utilization facilities. The first RDF plant was constructed in Wonju Korea in October 2006 and is good operation. Government accelerate establishment of concerning laws and support to develop technology and spread RDF plants and utilization facilities.

• 한국가구학회지
• /
• 제20권2호
• /
• pp.122-135
• /
• 2009

The objective of this work was to research click profile of laminate flooring by comparison of click and bonding laminate floorings, especially base on the click profile shape, bonding strength and international patents. Non-glue locking system has been used since laminate flooring was developed. For the reason of environment and saving installation time, the manufacturer in Europe and USA has developed click profile for laminate flooring. Each manufacturer has patent on each click profile. Although each click profile has good lock strength as shape, Berryand Unilin company's click profile systems showed higher locking strength than others. Korean laminate flooring company pay the fee of patent for using European and American manufacturer's click profile. From this work, we grope Korean style laminate flooring and click profile through research on the click profile shape, bonding strength and patents of European and American manufacturers.