• 대한정형도수물리치료학회지
• /
• 제29권2호
• /
• pp.69-75
• /
• 2023

Purpose: This study examined the distance between the coracoid process and the humeral head using an ultrasonography device when shoulder active contraction were applied according to the guided direction in the end range of shoulder mobilization. This study aims to provide essential data on treating shoulder disease patients. Methods: The subjects of this study were 20 adults with healthy shoulder joints. ultrasonography (US) equipment was used to examine shoulder joint mobilization under two conditions: (1) anteroposterior (AP) joint mobilization and (2) superoinferior (SI) joint mobilization. Shoulder active contraction was assessed in the end range. The distance between the coracoid process and the humeral head was measured. A linear probe was used for US; the frequency was set to 7.5MHz, and the US image display method was set to B-mode. The US measurement values were measured in (1) the starting position, (2) the end range position, and (3) the end range position of the shoulder active contraction, and the moving distance was drawn in a straight line through the US image. The distance was determined as the measurement value, and the average values were compared. Reults: The results were as follows: (1) the measured AP Joint mobilization increased by an average of .52cm from the end range of the joint mobilization with shoulder active contraction; (2) the measured SI Joint mobilization increased by an average of .49cm from the end range of the joint. Conclusion: When shoulder mobilization is applied, the distance between the coracoid process and the humeral head increases when muscle contraction occurs through shoulder active contraction in the end range, according to the therapist's guidance. Therefore, shoulder mobilization combined with shoulder active contraction is an effective treatment method for patients with shoulder injuries.

• 한국군사과학기술학회지
• /
• 제4권2호
• /
• pp.70-83
• /
• 2001

The required standards for environmental tests for communication and electronic equipment used currently in the army are not standards into which the Korean climate and use environment are taken into consideration. But the environmental testing standards of the U.S. army at the time of its establishment(MIL-STD-810) “A” version has been used without taking into consideration the Korean domestic situation and conditions by simply translating the US standards. Adherence to these standards may limit the ability to supply materials in case of emergency since the increase in the manufacturing costs according to excessively strict standards induces an increase in the acquisition cost of military equipment, unnecessarily high maintenance and repair expenses are consumed, and stocks of parts for the military use have to be retained at all times.

• 한국전기전자재료학회논문지
• /
• 제19권12호
• /
• pp.1149-1153
• /
• 2006

We developed the equipment palpating cell proliferation using a high brightness LED. This equipment was fabricated using a micro-controller and a high brightness LED, and designed to enable us to control light irradiation time, intensity, frequency and so on. Especially, to control the light irradiation frequency, FPGA was used, and to control the change of output value, TLC5941 was used. Control stage is divided into 30 levels by program. Consequently, the current value could be controlled by the change of level in Continue Wave(CW) and Pulse Width Modulation(PWM), and the output of a high brightness LED could be controlled stage by stage.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.95-95
• /
• 2010

Because of the environmental matters the importance of the city railroad is as time goes by increasing. The case of obstacle of the power equipment which supplies electric power to city railroad will occur social and economical enormous loss. Thus, I studied on the preventing method in advance which makes it possible for us to maintain facilities efficiently. The main check points of the power facilities are voltage, current, humidity, partial discharge, move current. These points are gathered by sensor and transmitting to data acquisition device. These data are used to check equipment status in real time. In this paper I described in brief test process and results of the detection system.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1930-1936
• /
• 2010

Because of the environmental matters the importance of the city railroad is as time goes by increasing. The case of obstacle of the power equipment which supplies electric power to city railroad will occur social and economical enormous loss. Thus, I studied on the preventing method in advance which makes it possible for us to maintain facilities efficiently. The main check points of the power facilities are voltage, current, humidity, partial discharge, move current. These points are gathered by sensor and transmitting to data acquisition device. These data are used to check equipment status in real time. In this paper I described in brief test process and results of the detection system.

• 한국정밀공학회지
• /
• 제16권4호통권97호
• /
• pp.85-94
• /
• 1999

Reconfiguration, expansion, or new establishment of FMS requires the availability of a shop floor control (SFC) system relevant to the FMS since it is closely related with the hardware component of FMS. Due to the expensive cost of its development, significant research efforts have been made to develop an SFC system that is reusable. This paper presents Abstract Machine Tool (AMT) approach applied to develop an SFC sytem that is reusable without additional programming. The AMT model enables us to design the SFC system independently of the hardware-dependent attributes of euqipment; an AMT models a workstation by abstraction and presents an equipment-independent interface to machining cell controller. Specifically, we describe how we formalize the interfaces among equipment in order to build an AMT and how we design the machining cell control software based on AMT models. We also present MACHINIST the machining cell control system for IAE-FMS plant as an implementation example.

• 설비공학논문집
• /
• 제20권4호
• /
• pp.252-259
• /
• 2008

The purpose of this study is to estimate the movement of microbial contaminant caused by bio-attack using bio-agent such as bacillus anthracis for preventing contaminant diffusion. multizone simulation was carried out in the case of three types of bio-attack scenario in the government building. Simulation results show that severe contaminant diffusion is brought about in all cases of bio-attack scenario in one hour, though pollution boundaries have different mode according to bio-attack scenarios. Simulation results also show that immune building technology such as filter and UVGI technology gives us powerful alternatives to meet the emergent situation caused by unexpected bio-attack.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.934-939
• /
• 2004

The Korea high-speed rail, based on the French design. It also implements new concept to increase the strength of bridge deck by adding an impact factor (dynamic intensity factor) in static load. In order to assure the dynamic stability, SYSTRA and Jeseph Penzien, a professor in CEC (the US) conducted a dynamic stability review on design phase. Analyzing the review results, they developed design criteria for dynamic behavior. This study deal with operating PSC box GIRDER equipped with measurement equipment or measured data of Seoul $\∼$ Taejeon, P.S.C BOX GIRDER bridge and steel comsition bridge equipped with measurement equipment based on structual knowledge about configuration of measuring sensor, response analysis of structure when train runs was performed by using measured data of PSC box girder to directly compare with design criteria. moreover, the dynamic stability with comparison of high-speed rail construction criteria was reviewed and analyzed based on historical records.

• 수산경영론집
• /
• 제51권1호
• /
• pp.19-36
• /
• 2020

The purpose of this paper is to analyze the productivity of the costal fisheries in Jeonnam Province. In this study, the operational characteristics and Cobb-Douglas production function of coastal fisheries were examined based on a research on the actual condition of costal fisheries (RACF). The statistical analysis of RACF data reveals that Cobb-Douglas production function consists of the three variables: fishing quantity per ton-age, the number of fisherman per ton-age and fishing equipment cost per ton-age. The results of this study show us that the relation and productivity between labor and capital of the operational equipment in the coastal fisheries. If extensive comparable biological and market data become available, analysis model can be widely applied to yield more accurate results.

• 한국소음진동공학회논문집
• /
• 제20권7호
• /
• pp.685-692
• /
• 2010

A hybrid mount for shipboard machinery installed on naval ships was developed. The mount is combined with a rubber mount and a piezostack actuator. The rubber mount is one of the most popular and effective passive mounts to have been applied to various vibration systems to date. The piezostack actuator is featured by a fast response time, small displacement and low power consumption. Through a series of experimental tests conducted in accordance with MIL-M-17185A(SHIPS), MIL-M-17508F(SH), and MIL-S-901D which are US military specifications related to the performance requirements of the mount, it has been confirmed that the hybrid mount shows more effective performance for use in naval ships.