• Korean Journal of Food Science and Technology
• /
• v.32 no.3
• /
• pp.726-735
• /
• 2000

This study was conducted to investigate the biological activities of polysaccharide extracted from the fruit body and cultured mycelia of Phellinus linteus IY001. All fractions were extracted by hot water, in the next, Fr. I, Fr. II, Fr. III and Fr. IV were polysaccharide obtained by ethanol precipitation or ultrafiltration. The highest antitumor activity against sarcoma 180 in ICR mice was observed in Fr. III and Fr. IV at the level 85%, but the antitumor activity had no connection with their anticomplementary activity in vitro, it might probably be due to extraction of hot water. All fractions promoted the production of nitric oxide and $TNF-{\alpha}$ in macrophage, addition of Fr. I and Fr. II resulted in production of nitric oxide$3(5.9{\sim}37.6\;{\mu}M)$ and of the $TNF-{\alpha}$ production($8,696.2{\sim}9,420pg/ml)$. All fractions inhibited the lipid peroxidation induced by $AsA/Fe^{2+}$, $ADP/NADPH/Fe^{3+}\;and\;CCl_4/NADPH$ in rat liver microsomes, and Fr. III showed the electron donating ability stronger than tocopherol in assay system using DPPH. From these results, it is suggested that all fractions contain immunoregulatory components which may protect cellular materials from the oxidative damages by their radical scavenging activities.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.22 no.3
• /
• pp.175-183
• /
• 2012

Objectives: This study developed a harmonized method for risk assessment based on the Hazard & Risk Evaluation of Chemicals (HREC) according to the Industrial Safety and Health Act (ISHA). Methods: Three preliminary studies, performed during 2010 and 2011 by the Occupational Safety and Health Research Institute and three academic research groups, were compared. The differences in risk assessment, especially in the dose-response assessment method, were analyzed. A new harmonized method for dose-response assessment was suggested and its applicability for the HREC was examined. Results: Considering the various steps of each dose-response assessment, the equivalent steps in quantitative correction, uncertainty factor 2 (UF2) for intra-species uncertainty, and UF3 for the experimental period in the uncertainty correction were relatively high. Using our new method, the total correction values (quantitative correction plus uncertainty correction) ranged from 72~15,789 to 30~60, and the ratio of the threshold limit value (TLV) to the reference concentration decreased from 12.8~1900 to 5.4~11.8. Furthermore, when we performed risk characterization by our new method, hazard quotient (HQ) values for chloroethylene, epichlorohydrin, and barium sulfate became 3.0, 14.1, and 1.13 respectively, whereas three previous studies reported HQ values of 7.1, 4580, and 87.3 considering reasonable maximum exposure (RME) conditions. HQs of the three chemicals were calculated to be 0.6, 2.4, and 0.1 respectively, when compared to their TLVs. Conclusions: Our new method could be applicable for the HREC because the total correction values and the ratio of TLVs were within reasonable ranges. It is also recommended that additional risk management measures be applied for epichlorohydrin, for which the HQ values were greater than 1 when compared with both reference values and the TLV. Our proposed method could be used to harmonize dose-response assessment methods for the implementation of risk assessment based on the HREC according to ISHA.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.44 no.4
• /
• pp.455-463
• /
• 2018

Skin elasticity has been known to be influenced by the change of dermal components such as collagen, elastic fiber, and glycosaminoglycans. However, it is unclear whether the uppermost epidermis may affect the mechanical characteristics of elasticity. In present study we tried to find the role of stratum corneum when determining the elastic property under skin bioengineering measurement with $Cutometer^{(R)}$. A total of 10 healthy volunteers aged 25-40 years were investigated by the parameters reflecting the skin elasticity from face and volar forearm. Within various ranges of suction pressure, R0 (=Uf), R7 (=Ur/Uf) and R8 (=Ua) were obtained to explore the depth-associated elasticity. In addition, these parameters were re-measured after the skin was fully hydrated. As results, we found that the measurement of depth-associated elasticity was possible as using various suction pressure. And the R7 parameter was significantly lower from face than those from forearm in before hydration (p < 0.05). Also, we found that the hydration of stratum corneum could affect skin elasticity. Especially, the R7 parameter at 300 mbar suction pressure of face skin showed significantly increased values than that of before hydration (p < 0.05). Interestingly, measured data from the face before and after hydration manifested relatively higher variation than from the forearm. These results suggest that it is possible to evaluate the skin elasticity considering the changes of stratum corneum and epidermis by using various suction pressure and skin hydration.

• Korean Membrane Journal
• /
• v.9 no.1
• /
• pp.57-63
• /
• 2007

Amphiphilic graft copolymer from poly(vinylidene fluoride) (PVDF) was synthesized using atom transfer radical polymerization (ATRP) for composite nanofiltration membranes. Direct initiation of the secondary fluorinated site of PVDF facilitates grafting of tert-butyl methacrylate (tBMA). Amphiphilic PVDF-g-PMAA graft copolymer with a 51:49 wt ratio was obtained by hydrolyzing poly(tert-butyl methacrylate) (PtBMA) to poly(methacrylic acid) (PMAA). Wide angle X-ray scattering (WAXS) and differential scanning calorimetry (DSC) confirmed the decrease of crystallinity of PVDF upon graft copolymerization. Composite nanofiltration membranes were prepared from PVDF-g-PMAA as a top layer coated onto PVDF ultrafiltration (UF) support membrane. The morphology and hydrophilicity of membranes were characterized using scanning electron microscopy (SEM) and contact angle measurement. The rejections of composite membranes were 80.2% for $Na_2SO_4$ and 28.4% for NaCl, and the solution flux were 9.5 and $14.5\;L/m^2\;h$ at 1.0 MPa pressure.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.4
• /
• pp.444-455
• /
• 2017

This study was conducted to evaluate the effect of panel density and resin content on properties of medium density fiberboard (MDF) to obtain some insights on MDF properties as a function of panel density and resin content. MDF panels with different panel densities such as 650, 700, 750 and $800kg/m^3$ were manufactured by adjusting the amount of wood fibers in the mat forming. MDF panels were also fabricated by spraying 8, 10, 12, and 14% of urea-formaldehyde (UF) resins onto wood fibers in a drum-type mechanical blender to fabricate MDF panels with a target density of $650kg/m^3$. As the panel density and resin content increased, the internal bonding (IB) strength of MDF panel consistently increased. Modulus of rupture (MOR), modulus of elasticity (MOE) and screw withdrawal resistance (SWR) had a similar trend to the IB strength. In physical properties, thickness swelling (TS) and water absorption (WA) decreased with an increase in both panel density and resin content. In addition, the formaldehyde emission (FE) which increased as the panel density and resin content became greater. In overall, the panel density of MDF had more significant effect than the resin content in all properties of MDF panels, indicating that it was better to adjust the panel density rather than the resin content for MDF manufacture.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1998.05a
• /
• pp.221-228
• /
• 1998

2차원 노심핵설계 코드 HELIOS를 이용하여 $^{7}$ LiF-BeF$_2$-ThF$_4$-$^{233}$ UF$_4$ 용융염 핵연료와 흑연(Graphite) 감속재로 구성된 AMBIDEXTER(Advanced Molten-salt Break-even Inherently-safe Dual-mission EXperimental and TEst Reactor) 원자로의 육각주형 로심격자에 대해 핵적 자활성 요건의 설계해석을 수행하였다. AMBIDEXTER 원자로는 액체 핵연료의 유동성을 이용한 온라인 핵연료 정화ㆍ처리ㆍ재생의 연속공정을 도입하여 노내의 잔류 핵분열 생성물질의 포화양을 최소로 유지시키고 중성자 경제성을 극대화하므로 높은 전환율을 얻는 설계이다. 핵연료 내에 잔류하는 핵분열생성물질의 포화농도에 대응하는 연소도를 등가연소도로 정의할 때, 열출력 250MW$_{th}$ AMBIDEXTER 원자로의 등가연소도 374MWD/TeH.E.의 평형 로심 모델에 대해 핵적 자활성을 지배하는 주요 핵설계 인자로서 용융염 핵연료의 $^{233}$ U Mole 분율, 흑연-대-용융염의 체적비, 노심격자 간격 및 출력 밀도의 변화에 따른 임계도 및 전환율을 평가하였다. 그 결과, $^{233}$ U Mole 분율과 혹연-대-용융염 체적비를 좌표축으로 하는 2차원상공간에서 핵적 자활성 요건 상태함수는 각 노심격자간격에 대해 완만한 선형 함수로 표현할 수 있음을 확인하였다.

• Journal of Korean Society of Rural Planning
• /
• v.3 no.1
• /
• pp.68-76
• /
• 1997

The purpose of this study is to suggest the spatial model which can be applied to the tourism farm plan. This study includes : (1) the analysis of existing facilities and activities of 22 tourism farms in Kyunggido and (2) the survey questionnaire about user's attitudes in 3 tourism farms. The results can be summarized as follows : 1) The .Major activities in the tourism farm are the resting/playing based on the natural environment and group meeting. 2) Average area is 17879.4uf (5418 坪). The most frequent facility is restaurant and lodge. 3) It is necessary to propose various types of tourism farm considering both natural conservation and development of rural region and users'various wants. The tourism farms are officially classified into four types Natural education type, Mind and body training type, Weekend farm type, Recreation type. 4) The space for tourism farm is divided into an area of production, and area of processing, and an area of convenience/recreation. 5) It is desired the convenience facilities are located in front of a farm, and the area of production is located at the back of a farm, and simple rest facilities are located all of the farm. 6) The weekend farm model and processing/convenient facility model are proposed in this study. Three types of the weekend farm models are proposed - simple type, composite type, and garden type. Three types of the processing/convenient models are proposed one building type, adjacent building type, and scattered building type.

• Journal of Korean Society of Water and Wastewater
• /
• v.20 no.3
• /
• pp.403-410
• /
• 2006

The objective of this study was to evaluate the possibility of sedimentation basin omission when installed hybrid membrane filtration process in the field plant with the capacity of $500m^3/day$ for 11 months in the "G", water purification plant in Seoul. In order to evaluate the possibility of the sedimentation basin omission, we measured the change of DOC by coagulant dosage. Dosage of PAC(power activated carbon) 4mg/L and coagulant($AI_2O_3$ 10%) 1.67mg/L were compatible to meet the water quality. Also according to the experiment without settlement process, optimization G values were determined to be 300/s, 64/s, and 32/s at the mixing tank, the first flocculator and the second flocculator, respectively. The test was performed under the conditions PAC-coagulation-no settlement-MF. As a result, a dosage of 4.0mg/L as PAC and 0.86 to 1.22mg/L as $Al_2O_3$(10%) in the condition of flux of 62.5LMH were determined to keep TMP value less than $1.0kg_f/cm^2$.

• Membrane Journal
• /
• v.19 no.2
• /
• pp.104-112
• /
• 2009

Ultrafiltration membranes (UF) were manufactured by the conventional phase inversion method using an additives with N-methyl-2-pyrrolidinone as a solvent. Characteristics of performance could be controlled by the preparation conditions and the operating methods. The fouling resistance was observed by the relative ratio of permeate flux $(J_t)$/pure water flux $(J_o)$. Compared with the anion charged membranes and its original polyamide membrane, fouling resistance to the protein was increasing in proportion to the ion exchange capacity. The relative flux for the bovin serum albumin (BSA) solution increased as pH value further away from isoelectric point of BSA. The hydrophilicity of a membrane, the pH condition, and the operating temperature played the important role in the membrane permeations.

• Food Science and Preservation
• /
• v.24 no.4
• /
• pp.542-549
• /
• 2017

In this study, a peptide exhibiting antioxidant activity was isolated from sandfish (Arctoscopus japonicus) roe hydrolysate (SRH) in order to evaluate their practical uses as materials for manufacturing functional foods. The A. japonicus roe protein was hydrolyzed using Collupulin MG, and isolation of antioxidant peptide was performed using ultrafiltration (UF), prep-HPLC, and RP-HPLC. The SRH with a molecular weight below 3 kDa constituted about 38% of the whole hydrolysate, and the fraction with a molecular weight below 3 kDa showed significantly greater antioxidant activity compared to the original SRH and other fractions. The isolation fold of the antioxidant peptide isolated from SRH throughout the four-step procedure was 7.11-fold, and protein yield was 14.8%. The DPPH radical scavenging activity of isolated antioxidant peptide was above 90% at a concentration of 1.0 mg/mL, which was similar to that of the Trolox at a concentration of 0.1 mg/mL. These results suggested that the antioxidant peptide derived from A. japonicus roe could be a useful additive for producing functional foods and protein supplements. However, it is necessary to perform further study the structural characteristics of this antioxidant peptide isolated from A. japonicus roe.