• 대한지역사회영양학회지
• /
• 제24권3호
• /
• pp.208-222
• /
• 2019

Objectives: This study examined the usage status and the degree of satisfaction of university foodservice (UF) perceived by international students in Busan. Methods: A questionnaire survey was conducted on the utilization of UF, improvement requirements, preference type and recipe, as well as the importance and satisfaction of UF quality attributes as perceived by international students (n=604) at universities in the Busan area between April and June 2017. Results: UF was 'generally satisfied' or 'very satisfied' in about 35.4% of the study population, and 'not very satisfied' or 'not satisfied at all' in approximately 11.5%. Approximately 21.7% said that UF contributed to dietary life 'very much' or 'quite significantly' and 36.4% said 'not very much' or 'not at all'. The largest demand for improvement of UF was 'variety of menu' (52.0%). The most leftover food in UF was kimchi (30.3%) and broth/stew (19.2%), and the major reason for having leftover was 'not to one's taste' (27.8%). After dividing the foodservice quality attributes into 5 factors - food quality and price, sanitation, convenience, physical environment, and service environment - and analyzing the importance and satisfaction of each factor, it was shown that satisfaction was generally lower than the degree of importance. Sanitation factor was high for both importance and satisfaction of UF, while convenience factor was high for the importance but low for satisfaction of UF. Four variables in the food quality and price factor ('food taste', 'freshness of food', 'nutritive value of food', and 'reasonable price') and 3 variables in the convenience factor ('variety of menu', 'prompt food service', and 'display of the meals for the day') had high importance but low satisfaction, showing the need for an improvement on these areas. Conclusions: Based on the study results, it is necessary to improve the food quality, as well as the price and convenience factors, and to provide various menus to increase the satisfaction of UF in international students.

• Journal of the Korean Wood Science and Technology
• /
• 제12권1호
• /
• pp.3-10
• /
• 1984

본(本) 연구(硏究)는 토란분말(土卵粉末) 및 밀가루 분말(粉末)을 알카리와 반응(反應)시켜 제조(製造)한 접착제(接着劑)를 합판용(合板用)으로 개발(開發)코저 실시(實施)하였다. 토란(土卵) 및 밀가루 접착제(接着劑) 대(對) 요소수지(尿素樹脂)의 비(比)를 각각(各各) 0:100, 10:90, 20:80, 30:70, 40:60, 50:50, 60:40, 80:20, 100:0으로 혼합(混合)하여 합판접착(合板接着)에 적용(適用)하였으며 또한 비교실험(比較實驗)을 위하여 요소수지(尿素樹脂)에 대한 통상적(通常的)인 증량방법(增量方法)인 밀가루 분말(粉末) 대(對) 요소수지(尿素樹脂)와의 증량비(增量比)를 10:90, 20:80, 30:70, 40:60, 50:50으로 혼합(混合)한 접착제(接着劑)로 합판(合板)을 제조(製造)하여 그 접착력(接着力)을 비교(比較) 분석(分析)하였다. 토란접착제(土卵接着劑)에 요소수지(尿素樹脂)를 30:70의 비(比)로 혼합(混合)한 것이 상태(常態) 및 내수접착력(耐水接着力)에서 가장 우수한 토란접착제(土卵接着劑)에 요소수지(尿素樹脂)를 혼합(混合)하여 제조(製造)한 합판(合板)의 상태접착력(常態接着力)은 혼합비(混合比) 60:40 까지는 같은 혼합비(混合比)의 밀가루 접착제(接着劑)를 혼합(混合)한 것과 밀가루 분말(粉末)을 증량(增量)한 것보다 높은 값을 나타냈다. 밀가루 접착제(接着劑)에 요소수지(尿素樹脂)에 혼합(混合)한 합판(合板)의 상태접착력(常態接着力)은 밀가루 분말(粉末)을 증량(增量)한 것과 비교(比較)하여 혼합비(混合比) 20:80(밀가루 접착제(接着劑) : 요소수지)까지는 비슷한 값을 보이다가 혼합비(混合比) 30:70에서부터는 높은 값을 나타내고 있다. 토란접착제(土卵接着劑) 및 밀가루 접착제(接着劑)를 요소수지(尿素樹脂)에 혼합(混合)한 합판(合板)의 내수접착력(耐水接着力)은 혼합비(混合比) 40:60(토란(土卵) 및 밀가루 접착제(接着劑) : 요소수지(尿素樹脂)) 까지는 밀가루 분말(粉末)을 증량(增量)한 것보다 훨씬 높은 값을 나타내었다. 토란접착제(土卵接着劑)를 혼합(混合)한 것은 밀가루 접착제(接着劑)를 혼합(混合)한 것과 비교(比較)하여 전혼합비(全混合比)에서 높은 내수접착력(耐水接着力)을 보였다. 밀가루 분말(粉末)을 직접(直接) 증량제(增量劑)로 가용(使用)한 것보다 알카리와 반응(反應)시켜 만든 토란접착제(土卵接着劑) 및 밀가루 접착제(接着劑)를 혼합(混合)한 것이 상태(常態) 및 내수접착력(耐水接着力)을 상당(相當)히 증진(增進)시킬 수 있었는데 이것은 제조(製造)된 접착제(接着劑) 자체(自體)가 접착성(接着性)을 갖기 때문에 나타난 결과(結果)로 생각된다.

• Journal of the Korean Wood Science and Technology
• /
• 제35권5호
• /
• pp.76-86
• /
• 2007

This study was conducted to investigate the effects of formaldehyde to urea (F/U) mole ratio on thermomechanical curing of UF resin adhesives with different F/U mole ratios. Thermomechanical curing of these UF resin adhesives was characterized using parameters of dynamic mechanical analysis (DMA) such as the gel temperature, maximum storage modulus, and peak temperatures of storage and loss modulus. As the F/U mole ratio decreased, the gel temperature of UF resin adhesives increased. The maximum storage modulus as an indicator of the rigidity of UF resin adhesives decreased with decreasing F/U mole ratio. The peak temperature of tan $\delta$ increased with decreasing F/U mole ratio, indicating that the vitrification occurred faster for high F/U mole ratio of UF resin adhesives than for the one of lower F/U mole ratio. These results partially explained the reason why UF resin adhesives with lower F/U mole ratio resulted in relatively poor adhesion performance when they were applied.

• 동아시아식생활학회지
• /
• 제10권5호
• /
• pp.394-403
• /
• 2000

The functional properties of sesame protein concentrate(SPC) using different size of ultrafiltration(UF) membranes were examined and compared with those of conventional acid-precipitated sesame protein concentrate. The protein contents of SPC by UF with molecular size of 10K, 30K and look dalton membranes were 84.2%, 82.7%, and 76.4%, respectively, and that of acid-precipitated SPC was 88.7%. The nitrogen solubility of SPC by UF was higher than that of conventional SPC at various pH levels. Especially, it showed three-fold increase at near isoelectric point. However, water absorption capacity and fat absorption capacity of SPC by UF were decreased. For emulsion and foam properties, there were no significant differences between SPC by acid precipitation and SPC by UF method. At various pH levels, SPC by membrane with pore size of 30K dalton showed the highest emulsion properties. The SPC by UF had slightly higher viscosity than defatted sesame flour and SPC by acid precipitation.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2003년도 생물공학의 동향(XII)
• /
• pp.334-338
• /
• 2003

막분리 공정을 모형시설에 도입 후 약 2년간에 걸쳐 막의 구성을 달리하여 운영하였으며, 원수 및 처리수의 수질특성을 조사하였다. 원수의 수질특성은 친수성 물질이 53%, 소수성 물질 28% 나머지는 반친수성물질로 구성된 것으로 조사되었으며, UF 및 NF 처리수의 분자량 분포를 조사한 결과 원수와 달리 큰 분자량을 갖는 부분이 제거된 것을 볼 수 있었다. UF와 NF의 막분리 공정운전 결과를 종합해 본 결과, UF막인 GH(2500Da)와 GM(8000Da) 경우 GM이 생산량 및 운전특성에서 GH에 비해 우수한 결과를 보여 주었으며, NF막인 HL$(150{\sim}300Da)$과 GM의 비교 운전한 결과 NF막인 HL의 유기물 제거 효과가 우수한 것을 보여 주고 있다. 그러나 UF막인 GM의 경우 MWCO가 8000Da로 NF막인 HL에 비해 큼에도 불구하고 유기물 제거 면에서 상당히 우수한 유기물 제거 효과를 보여 주었으며, 소독부산물의 생성능 평가에서도 50%이상의 양호한 제거 효과를 보여 주었다.

• 한국식품과학회지
• /
• 제22권7호
• /
• pp.780-785
• /
• 1990

유채박 단백질의 효과적인 추출 및 정제공정을 확립하기 위하여 추출용매를 비교했으며, 1% SHMP 용매로 추출한 후 등전침전, 산세척, UF농축 처리에 의하여 정제한 단백질의 수율 및 glucosinolate와 phytate 잔존량을 조사하였다. 추출조건은 1% SHMP(pH 8.0) 용매가 가장 적당하였으며, glucosinolate 및 phytate 제거를 위한 정제효과 면에서는 2회 산세척시와 1회 산세척 및 UF(100K) 농축 처리한 공정이 가장 효과적 이었다. 수율과 단백질 함량은 2회 산세척의 경우는 37.1% 및 75.3%이었으며, 1회 산세척과 UF(100K) 농축의 경우는 42.1% 및 72.4%였다. 따라서 glucosinolate와 phytate 제거효과와 단백질의 수율면을 고려한 결과 가장 효과적인 정제공정은 등전침전${\rightarrow}$1회 산세척(pH 3.5)${\rightarrow}$중화(pH 7.5)${\rightarrow}$ UF(100K) 농축 처리하는 방법이다.

• Journal of the Korean Wood Science and Technology
• /
• 제45권4호
• /
• pp.471-481
• /
• 2017

As the molecular weight (MW) of urea-formaldehyde (UF) resins had a great impact on their properties, this work was conducted to study effect of analytical parameters of gel permeation chromatography (GPC) on the MW measurement of UF resins. GPC parameters such as flow rate, column, detector temperature, and sample injection temperature were selected to compare number-average molecular weight (Mn), weight-average molecular weight (Mw), molecular weight distribution (MWD) and polydispersity index (PDI) of two UF resins with different viscosities. As expected, UF resin with higher viscosity resulted in greater Mn and Mw than those of low viscosity UF resin. When the flow rate increased, both Mn and Mw of UF resins decreased and MWD became narrower. By contrast, both Mn and Mw increased and MWD became wide when the column, detector, and sample injection temperature increased. The column, detector, and sample injection temperature of $50^{\circ}C$ at a flow rate of $0.5m{\ell}/min$ resulted in the highest MW and broadest MWD for the GPC analysis. These results suggest that the apparent molecular size or a hydrodynamic radius of UF resin molecules dissolved in the mobile phase affect to Mn, Mw and MWD.

• Membrane and Water Treatment
• /
• 제5권1호
• /
• pp.15-29
• /
• 2014

Reverse Osmosis (RO) desalination has gained wide and increasing acceptance around the world as a straightforward undertaking to alleviate the alarming water crisis. An enhanced monitoring of the quality of the water feeding in seawater RO (SWRO) plant through the application of an effective pretreatment option is one of the keys to the success of RO technology in desalination plants. Over the past 10 years, advances in ultrafiltration (UF) membrane technologies in application for water and wastewater treatment have prompted an impetus for using membrane pretreatment in seawater desalination plants. By integrating SWRO plant with UF pretreatment, the rate of membrane fouling can be significantly reduced and thus extend the life of RO membrane. With the growing importance and significant advances attained in UF pretreatment, this review presents an overview of UF pretreatment in SWRO plants. The advantages offered by UF as an alternative of pretreatment option are compared to the existing conventionally used technologies. The current progress made in the integration of SWRO with UF pretreatment is also highlighted. Finally, the recent advances pursued in UF technology is reviewed in order to provide an insight and hence path the way for the future development of this technology.

• Current Research on Agriculture and Life Sciences
• /
• 제32권3호
• /
• pp.125-130
• /
• 2014

This study used transmission electron microscopy (TEM) to investigate the micro-morphological features of two formaldehyde to urea (F/U) mole ratio liquid urea-formaldehyde (UF) resins with three hardener levels as a function of the curing time. The micro-morphological features of the liquid UF resins were characterized after different curing times. As a result, the TEM examination revealed the presence of globular/nodular structures in both liquid UF resins, while spherical particles were only visible in the low F/U mole ratio resins. The high F/U mole ratio liquid UF resins also showed extensive particle coalescence after adding the hardener, along with the appearance of complex filamentous networks. When the resins were cured with a higher amount of hardener and longer curing time, the spherical particles disappeared. For the low mole UF resins, the particles tended to coalesce with a higher amount of hardener and longer curing time, although discrete spherical particles were still observed in some regions. This is the first report on the distinct features of the crystal structures in low F/U mole ratio UF resins cured with 5% hardener and after 0.5 h of curing time. In conclusion, the present results indicate that the crystal structures of low F/U mole ratio UF resins are formed during the curing process.

• Annals of Clinical Microbiology
• /
• 제21권4호
• /
• pp.75-79
• /
• 2018

배경: 요배양검사는 요로감염 진단을 위한 표준검사로 가장 흔히 의뢰되는 미생물 배양 검사 중 하나이다. 소변 자동분석기는 감염과 관련된 많은 정보를 제공한다. 최근 개발된 Sysmex UF-5000 (Sysmex, Japan)은 유세포분석 방법에 의해 세균, 효모균, 백혈구 등의 입자를 정량적으로 측정하고, 그람 염색성 정보를 제공한다. 저자들은 UF-5000을 이용하여 불필요한 요배양검사를 얼마나 선별할 수 있는지 평가하였다. 방법: 요배양검사가 의뢰된 453 검체 중 비뇨기과/신장내과 의뢰 검체를 제외한 126 검체를 대상으로 요시험지봉검사와 UF-5000으로 검사를 시행하여 요배양검사 결과와 비교하였다. 소변 배양은 집락수가 $10^4CFU/mL$ 이상인 경우 양성으로 판정하였다. 결과: UF-5000의 세균 수 $50/{\mu}L$이하, 효모양 세포 $100/{\mu}L$ 이하를 기준으로 했을 때 분석 대상 요배양의 38.1% (48/126), 전체 요배양 453건의 10.6%를 불필요한 요배양검사로 선별해 낼 수 있었다. 결론: UF-5000에서 산출된 세균 및 효모양 세포의 수로 음성 배양 결과를 예측할 수 있으며 약 10%의 불필요한 배양검사를 줄일 수 있다.