• Journal of Ginseng Research
• /
• v.25 no.2
• /
• pp.94-100
• /
• 2001

The influence of cultivation condition and harvest time on the storage stability of the fresh ginseng (50g) individually packaged in a soft film bag (ONY/LDPE/L-LDPE; 200$\times$300 mm, 90㎛) was investigated. When the fresh ginsengs were divided into four groups of direct-planted ginseng on the paddy soil(PD), transplanted ginseng on the upland(UT) and each group was stored at 25$\^{C}$ for 40 days, the quality deterioration rate was the highest in PD group while PT, UD and UT groups exhibited similar quality patterns from each other. When each group was stored at 10$\^{C}$, the quality deterioration rate was also the highest in PD group and the other three groups exhibited similar quality patterns from each other till 90 days passed after storage. However, the quality deterioration rate of UT group was 54% which was higher than UD group or PT group 180 days after storage. When the fresh ginseng harvested between September of 1997 and October of 1998 was individually packaged with the soft film and stored at 25$\^{C}$ for 12 days, the quality deterioration rate was the lowest in the group harvested in October while relatively high in the groups harvested between July and September.

• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.9
• /
• pp.433-444
• /
• 2005

In video-on-demand(VOD) systems, a broadcast-based scheduling mechanism is known to be a very efficient technique for disseminating popular videos to very large client populations. The main motivations of broadcasting scheduling mechanisms are that they scale up extremely well and they have very modest bandwidth requirements. This paper proposes a new dynamic broadcasting scheduling mechanism, named FDBS (fast dynamic broadcasting scheme), and proves its correctness. This paper also evaluates the performance of FDBS on the basis of a simulation approach. The simulation results indicate that FDBS shows a superior performance over UD, CBHD, and NPB in terms of the average response time with very reasonable bandwidth requirements.

• Composites Research
• /
• v.34 no.6
• /
• pp.421-425
• /
• 2021

In this study, thermoplastic composites were manufactured using a thermoplastic resin (PEEK) with the same melting temperature and a highly heat-resistant carbon UD tapes with different carbon fibers (Type A, Type B). And the bonding characteristics and mechanical characteristics of each of the two produced thermoplastic composites by induction heating welding were examined. The bonding characteristics and mechanical characteristics of the thermoplastic composites were performed using C-Scan and B-Scan, which is a non-destructive inspection, and the single lap shear test, respectively. The temperature of the carbon composites surface was monitored using a thermal image camera.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.11
• /
• pp.39-46
• /
• 2022

In this paper, we propose a multi-task model that can simultaneously predict general-purpose tasks such as part-of-speech tagging, lemmatization, and dependency parsing using the UD Korean Kaist v2.3 corpus. The proposed model thus applies the self-attention technique of the BERT model and the graph-based Biaffine attention technique by fine-tuning the multilingual BERT and the two Korean-specific BERTs such as KR-BERT and KoBERT. The performances of the proposed model are compared and analyzed using the multilingual version of BERT and the two Korean-specific BERT language models.

• Journal of Animal Science and Technology
• /
• v.51 no.5
• /
• pp.345-352
• /
• 2009

This study utilized 332,625 records of linear type scores consisting for 15 primary traits, 22,175 final score and 84,612 pedigree information of 22,175 Holstein cows from 1993 to 2007 in Korea to estimate genetic parameters for 16 type traits. Genetic and error (co)variances between two traits selected from 16 traits were estimated using bi-trait pairwise analyses with DFREML package. The estimated heritabilities for stature (ST), strength (STR), body depth (BD), dairy form (DF), rump angle (RA), thurl width (TW), rear legs side view (RLSV), foot angle (FA), fore udder attachment (FUA), rear udder height (RUH), rear udder width (RUW), udder cleft (UC), udder depth (UD), front teat placement (FTP), front teat length (FTL) and final score (FS) were 0.31, 0.21, 0.25, 0.10, 0.29, 0.19, 0.09, 0.06, 0.12, 0.13, 0.12, 0.08, 0.26, 0.20, 0.28 and 0.15, respectively. ST had the highest positive genetic correlation with BD (0.90), while RLSV had the highest negative genetic correlation with FA (-0.56). RA had negative genetic correlation with most udder traits (-0.17~-0.02). Especially, RUW had the higher positive genetic correlation with STR (0.60), BD (0.62), and TW (0.49), however, UD had the higher negative genetic correlation with STR (-0.40) and BD (-0.40). FTL had negative genetic correlation with FUA, RUH, RUW, UC and UD. FS had positive genetic correlation with UC, UD and FTP (0.12, 0.18 and 0.20). However, additional research is needed on the use of these parameters in the genetic evaluation because estimated genetic and error variance-covariance matrices were not positive definite.

• Composites Research
• /
• v.35 no.4
• /
• pp.269-276
• /
• 2022

In this paper, a composite stiffened panel was fabricated using a three-dimensional weaving method that can reduce the risk of delamination, and mechanical properties such as buckling load and natural frequency were investigated. The preform of the stringer and skin of the stiffened panel were fabricated in one piece using T800 grade carbon fiber and then, resin (EP2400) was injected into the preform. The compression test and natural frequency measurement were performed for the stiffened panel, and the results were compared with the finite element analyses. In order to compare the performance of 3D weaving structures, the stiffened panels with the same configuration were fabricated using UD and 2D plain weave (fabric) prepregs. Compared to the tested buckling load of the 3D woven panel, the buckling loads of the stiffened panels of UD prepreg and 2D plain weave exhibited +20% and -3% differences, respectively. From this study, it was confirmed that the buckling load of the stiffened panel manufactured by 3D weaving method was lower than that of the UD prepreg panel, but showed a slightly higher value than that of the 2D plain weave panel.

• Journal of Gastric Cancer
• /
• v.24 no.2
• /
• pp.172-184
• /
• 2024

Purpose: The original eCura system was designed to stratify the risk of lymph node metastasis (LNM) after endoscopic resection (ER) in patients with early gastric cancer (EGC). We assessed the effectiveness of a modified eCura system for reflecting the characteristics of undifferentiated-type (UD)-EGC. Materials and Methods: Six hundred thirty-four patients who underwent non-curative ER for UD-EGC and received either additional surgery (radical surgery group; n=270) or no further treatment (no additional treatment group; n=364) from 18 institutions between 2005 and 2015 were retrospectively included in this study. The eCuraU system assigned 1 point each for tumors >20 mm in size, ulceration, positive vertical margin, and submucosal invasion <500 ㎛; 2 points for submucosal invasion ≥500 ㎛; and 3 points for lymphovascular invasion. Results: LNM rates in the radical surgery group were 1.1%, 5.4%, and 13.3% for the low-(0-1 point), intermediate- (2-3 points), and high-risk (4-8 points), respectively (P-fortrend<0.001). The eCuraU system showed a significantly higher probability of identifying patients with LNM as high-risk than the eCura system (66.7% vs. 22.2%; McNemar P<0.001). In the no additional treatment group, overall survival (93.4%, 87.2%, and 67.6% at 5 years) and cancer-specific survival (99.6%, 98.9%, and 92.9% at 5 years) differed significantly among the low-, intermediate-, and high-risk categories, respectively (both P<0.001). In the high-risk category, surgery outperformed no treatment in terms of overall mortality (hazard ratio, 3.26; P=0.015). Conclusions: The eCuraU system stratified the risk of LNM in patients with UD-EGC after ER. It is strongly recommended that high-risk patients undergo additional surgery.

• Broadcasting and Media Magazine
• /
• v.15 no.4
• /
• pp.9-22
• /
• 2010

최근 full-HD 3D 방송, UD(ultra-definition) 영상 서비스, mobile device 향 양방향 HD급 화상통신 등 기존 영상 서비스의 품질을 월등히 향상시키고자 하는 연구들이 진행되고 있다. 본 기고에서는 기존 H.264/AVC 영상 압축 표준의 성능을 2배 이상 향상시키는 것을 목표로 진행 중인 새로운 차세대 영상 압축 표준인 HEVC(high-efficiency video coding; MPEG-H/H.265)의 표준화 동향을 소개한다. 또한, 현재 HEVC test-model (HM) version 1을 구성하고 있는 요소 기술들을 결정하기 위해 진행되었던 성능 평가 과정에 대해 간략하게 소개하고, 마지막으로 HM의 전반적 구성 및 현재 성능 수준에 대한 평가결과를 보인다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.583-584
• /
• 2009

This is an experimental study of test parameters that have not been fully covered by previous researches in order to estimate more accurate transfer length of pretensioned, prestressed concrete members.

• East Asian mathematical journal
• /
• v.32 no.5
• /
• pp.651-658
• /
• 2016

In a bounded domain, we consider $$u_{tt}-{\Delta}u+{\normalsize\displaystyle\smashmargin{2}{\int\nolimits_0}^t}\;g(t-{\tau}){\Delta}ud{\tau}+u_t={\mid}u{\mid}^pu$$, where p > 0 and g is a nonnegative and decaying function. We establish a general decay result which is not necessarily of exponential or polynomial type.