• 한국기계기술학회지
• /
• 제13권1호
• /
• pp.31-40
• /
• 2011

This study was conducted to research how UCD(Ultra Constant Discharge) lamp lighting affects plant cultivation. To get the results within a short time, lettuce seedling was selected as a plant and nutrient hydroponic beds were used in a dark room for 100% artificial lighting. Two beds were installed for same distance lighting condition with UCD lamp and Hi-pressure Sodium lamp each and another two beds were installed for same light intensity condition with each type of lamp. After 15 days of cultivation, for both conditions, the yields under UCD lamp were weighed more than that under Hi-pressure Sodium lamp. The result can be analyzed that the spectrum of UCD lamp having near sunlight characteristic is much superior to that of Hi-pressure Sodium lamp having a line spectrum characteristic on yellow and red wavelengths for plant cultivation.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2003년도 추계학술대회 논문집
• /
• pp.1231-1232
• /
• 2003

This paper reports results of a recent survey of 184 Information Technology(IT) development practitioners and 90 User Interface (UI)/usability practitioners. This survey covered a broad range of issues including the respondents' profile, current development environment, usability and user-centered design (UCD) adoption issues in development, overall assessment of usability/UCD in Korea, and the most widely used methods and techniques. The results of this study are expected to provide an empirical basis for usability and UCD planning, training, adoption and execution in IT industry of Korea.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2010년도 추계학술대회
• /
• pp.63-80
• /
• 2010

This paper describes the development of various lighting equipment adapting Ultra Constant Discharge Lamp that has newly been on commercial supply in the market. Meeting the required conditions of lighting equipment, various types of UCD Lamp equipment with excellent performances could be successfully developed. In order to provide a guideline for the economical lighting product selection, the analyzed data comparison between Hi-pressure Sodium Lamp which has been the most popular lamp for street lighting and UCD Lamp is provided. The conclusions of the study are made as follows; (1) The performance measurement result of UCD Lamp shows excellent Luminous Efficacy as 108Lm/W, daylight-like Color Rendering Index as 90Ra, and the best operating temperature range as $-50^{\circ}C{\sim}+85^{\circ}C$. Comparing to the Hi-pressure Sodium Lamp, UCD could be evaluated as much superior products. (2) In an assembled status with the lighting fixture (Type STB형-60W), UCD Lamp was tested OK for one hour duration at the temperature range form $-50^{\circ}C$ to $+85^{\circ}C$ and the humidity of 98%. The operation at the extremely low temperature can be an excellent feature to enable the export to the cold temperature regions such as Northern Europe and Russia and the specific applications for defense systems and special industry. (3) As UCD Lamp is a genuine Korea made product following Energy-saving and Eco-friendly policy, it should be appreciated as one of the best $CO^2$ reduction Green product.

• 대한안전경영과학회지
• /
• 제12권4호
• /
• pp.41-51
• /
• 2010

This paper describes the development of various lighting equipment adapting Ultra Constant Discharge Lamp that has newly been on commercial supply in the market. Meeting the required conditions of lighting equipment, various types of UCD Lamp equipment with excellent performances could be successfully developed. In order to provide a guideline for the economical lighting product selection, the analyzed data comparison between Hi-pressure Sodium Lamp which has been the most popular lamp for street lighting and UCD Lamp is provided. The conclusions of the study are made as follows; (1) The performance measurement result of UCD Lamp shows excellent Luminous Efficacy as 108Lm/W, daylight-like Color Rendering Index as 90Ra, and the best operating temperature range as $-50^{\circ}C{\sim}+85^{\circ}C$. Comparing to the Hi-pressure Sodium Lamp, UCD could be evaluated as much superior products. (2) In an assembled status with the lighting fixture (Type STB형-60W), UCD Lamp was tested OK for one hour duration at the temperature range form $-50^{\circ}C$ to $+85^{\circ}C$ and the humidity of 98%. The operation at the extremely low temperature can be an excellent feature to enable the export to the cold temperature regions such as Northern Europe and Russia and the specific applications for defense systems and special industry. (3) As UCD Lamp is a genuine Korea made product following Energy-saving and Eco-friendly policy, it should be appreciated as one of the best $CO^2$ reduction Green product.

• 산업공학
• /
• 제17권4호
• /
• pp.490-498
• /
• 2004

This paper reports results of a recent survey of 184 Information Technology (IT) development practitioners and 90 User Interface (UI)/usability practitioners. This survey covered a broad range of issues including the respondents' profile, current development environment, usability and user-centered design (UCD) adoption issues in IT development practice, overall assessment of usability/UCD, and the most widely used usability/UCD methods and techniques. The results of this study are expected to provide an empirical basis for usability and UCD planning, training, adoption and execution in IT industry.

• 한국기계가공학회지
• /
• 제11권2호
• /
• pp.118-124
• /
• 2012

The simulation of the air flow over models in atmospheric boundary layer wind tunnel is a research region based on advanced scientific technologies imposed by the necessity of studying the turbulent fluid dynamics in the proximity of the Earth's surface. In this study, the atmospheric boundary layer wind tunnel of UCD is used, the mean velocities are measured by augmentation devices such as roughness blocks and spires. The experimental results of mean velocity profile are well fitted with the value of power law.

• 한국IT서비스학회:학술대회논문집
• /
• 한국IT서비스학회 2003년도 추계학술대회
• /
• pp.233-240
• /
• 2003

To develop high-quality software systems satisfying the customer's needs, user-centered design (UCD) process has been emphasized in the area of human-computer interaction. And component-based development (CBD) has been extensively studied to realize a systematic software reuse, thereby reducing the time-to-market and the development cost. Balanced integration of user-centered design process and CBD process will be a promising way for successful software construction, which effectively achieves three goals: the quality of software, the cost of software development, and the time-to-market. However, traditional CBD methodology seems to lack the concept of user-centered design process and the relevant methods. This paper proposes a way of incorporating user-centered design process into a CBD methodology. Firstly, this paper gives the brief introduction of UCD. Secondly, we explain typical UCD activities and methods along the phase of systems development lifecycle and propose the use of usability maturity model (UMM) for integrating UCD activities and methods with those of CBD methodology. Finally, as a case study, we describe the results of comparing the UCD activities to the activities of MaRMI-III, which has been developed as a CBD methodology at ETRI.

• Journal of Veterinary Science
• /
• 제23권2호
• /
• pp.34.1-34.7
• /
• 2022

A 13-yr-old Shih tzu was referred for surgical management of right-sided cranial abdominal mass, which corresponded to large, cavitated renal mass on ultrasonography, and was suspected to represent neoplasia. Intraoperative impression smear cytology (ISC) of the renal mass wall was consistent with benign renal cyst (RC), without evidence of neoplasia or infection. Deroofing and omentalisation were performed and histopathology was consistent with benign RC. Chronic kidney disease was diagnosed 4 mon postoperatively, however, the dog was asymptomatic, without cyst reoccurrence. Intraoperative ISC is an expedient and inexpensive diagnostic technique that can guide most appropriate treatment in dogs with large RCs.

• 한국식품저장유통학회지
• /
• 제8권3호
• /
• pp.326-330
• /
• 2001

샤르도네 품종을 이용한 포도주 양조용 효모의 발효 특성은 다음과 같다. S6U 균주는 다른 균주에 발효속도는 느렸지만 발효 종료시점에 완전히 발효되는 특징을 보였다. W-3 균주는 발효중 산 생성량이 적었으며 (0.75%), UCD530과 AC- 균주로 발효된 포도주에는 산류 extract 함량이 각각 3.26 mg/L 및 3.22 mg/L로써 다른 균주에 비해 많았다. CEG와 CS2 균주로 발효된 포도주는 특히 황색도 값이 높았으며, EC1118 균주는 다른 와인 효모에 비해 아세트알데하이드(49.9 mg/L)을 많이 생성하였다. 효모의 알콜 내성 특성을 나타내는 methylene blue dyeing ratio에 있어서, EC1118 및 CY3079 균주는 약 15% 미만의 낮은 methylene blue dyeing ratio을 나타내어 이 두 균주가 다른균주에 비해 높은 알콜 내성이 있음을 보여주었다. 글리세롤 함량에 있어서 UCD530 균주는 다른 균주에 비해 극히 많은 생성능을 보였고 또한 succinic acid 및 lactic acid 생성량도 높아 전형적인 S. bayanus 특징을 나타내었다. 포도주의 Acetic acid 함량에 있어서 UCD530, EC1118, AC-, CY3079, W-3 균주로 발효된 것은 170 mg/L 이하로 비교적 낮았으며 S6U, CEG, CS2로 발효된 포도주는 350 mg/L 정도로서 높았다.

• 한국통신학회논문지
• /
• 제40권12호
• /
• pp.2331-2342
• /
• 2015

본 논문에서는 다중 셀 하향링크에서 셀간 간섭의 영향을 고려하여 균일 채널 분해를 사용하는 비선형 송신기와 선형 수신기를 설계한다. 기존의 다중사용자 MIMO에 적용된 균일 채널 분해 방식을 다중 셀 다중사용자 MIMO환경으로 확장하여 각 셀 안의 모든 부채널에서 같은 SINR을 갖게 된다. 이 방법은 비트 할당을 하지 않기 때문에 변조/코딩 절차에서 큰 편리함을 제공하고 최대 diversity gain을 얻게 된다. 시뮬레이션 결과로부터 기존의 방법에 비하여 더 낮은 BER을 얻는 것을 확인할 수 있다.