• Title/Summary/Keyword: UCC2

Search Result 179, Processing Time 0.022 seconds

A Study on Spectral Characteristics of Korean White Pine (Pinus koraiensis $S_{IEB}$ et. $Z_{UCC}$) Needles in Gwangju-gun, Kyunggi-do, Korea (경기도 광주지역 잣나무 침엽의 분광특성에 관한 연구)

  • Joo Yeong-Teuk;Kim Young-Chai;Chung Dong-Jun;Kim Hong-Ryul
    • Korean Journal of Agricultural and Forest Meteorology
    • /
    • v.1 no.2
    • /
    • pp.103-109
    • /
    • 1999
  • This study was carried out to investigate spectral characterisistics and chlorophyll contents of Pinus koraiensis needles in Gwangju-gun, Kyunggi-do. In spectrum analysis by each age, needle showed difference on 700∼1,100 nm(NIR : near infrared ray). Light reflexibility keeps constant between 1st year needle and 3rd year needle, current year needle's value was higher than others and that was higher for 400∼500 nm and 600∼700 nm at 550 nm. Transmission to needle's age showed the highest result in current year needle. It showed in order of current, 1st, 2nd and 3rd year needle at 550 nm and 750 nm. Especially, current year needles of Pinus koraiensis showed a tendency to change transmission coefficient in NIR. The result of transmission coefficient measurement by each position of slope showed in order of middle slope, upper slope and lower slope. But the gathered needle in middle slope made marked change at NIR. Chlorophyll a content of the upper slope's needles was higher than other 4 positions but a component ratio was lower. In needle of the oppressed tree, Chlorophyll a content was rather low than others. Chlorophyll a content by slope positions, the upper slope's needle showed a highest value(4.48 mg/g) and lower slope was lowest value(1.35 mg/g). Chlorophyll b content also showed a similar tendency to chlorophyll a and chlorophyll(a+b) contents.

  • PDF

Measures to revitalize fisheries high school (수산계 고등학교 활성화 방안)

  • LEE Yoo-Won;LEE Jong-Ho;PARK Tae-Gun;RYU Kyung-Jin
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.58 no.3
    • /
    • pp.262-271
    • /
    • 2022
  • The purpose of this study is to investigate the status of admission and employment in fisheries high schools (FHS) and to consider ways to revitalize FHS through substantialization. The recruitment rate of new students in FHS decreased from 97.4% in 2016 to 83.2% in 2020. The aging training ship that FHS needs to improve most urgently is being jointly used by FHS across the country, and the construction of a joint training ship managed by the Korea Institute of Maritime and Fisheries Technology is being promoted. The average employment rate for FHS by year was 40.2-59.4%, and the fisheries-related employment rate was low at 31.0-38.9%. On the other hand, the acquisition rate of certificate of competence was 37.5-52.0%, and the rate of employment on board of those who obtained the certificate of competence was 42.9-59.8%. In order to secure new students and improve the recruitment rate, we operate experiential classrooms that reflect the characteristics of training ships and departments and conduct public relations activities using sns, publicity video ucc, YouTube, etc. It will be necessary to expand opportunities for fisheries-related vocational experience through active career exploration and elective courses in the FHS credit system. Finally, it is judged that fisheries related government agencies, industries and local governments need to improve their awareness of FHS and plan to support fisheries manpower nurturing in order to attempt the vitalization of FHS.

Population-related factors affecting the regional distribution of medical institutions in Korea (지역별 요양기관의 분포에 영향을 미치는 인구관련 요인)

  • Lee, Sunkyoung;Cho, Eunseong;Yoon, Seok-Jun
    • Korea Journal of Hospital Management
    • /
    • v.18 no.2
    • /
    • pp.15-32
    • /
    • 2013
  • Few public health researchers have paid research attention to the location of medical institutions in Korea. Previous studies were published in geography journals, and relied on limited data in terms of geographic regions and the type of medical institutions. This study utilized nationwide data covering 8 types of medical institutions. We obtained data from Health Insurance Review and Assessment Service and National Population and Housing Census. The correlation coefficients of resident, daytime, university-graduate population, and the population of different age groups (fewer than 15, 15~64, 65 or more) were compared to understand their relative association with the location of medical institutions. Medical clinic, dental clinic, oriental medical clinic, and pharmacy, all of which are almost completely operated by private sector, showed strong positive correlation with population. Hospital-level medical institutions, which are operated by both public and private sector, had moderate positive correlation. Daytime population and university-graduate population, rather than resident population, were more correlated with the location of medical clinics. The correlation coefficients of the population of 15~64 age group and the location of medical institutions were greater than that of other age groups. The results showed that daytime and university-graduate population are more important than resident population to explain the location of medicalrelated facilities. The results also suggests that the population of age groups (especially, 15~64) might be one of important influence factors in the location of medical institutions.

  • PDF

A Study on the Remedy for Breach of Warranty under the Uniform Commercial Code (UCC상 Warranty 위반의 구제에 관한 연구)

  • 서정일
    • Journal of Arbitration Studies
    • /
    • v.13 no.2
    • /
    • pp.291-319
    • /
    • 2004
  • The seller may take a warranty with respect to the goods. If they are not as warranted, they may be held liable for the breach of warranty. Even when they has not made a warranty, the law will in some instances hold them responsible as though they had made a warranty. An express warranty is a part the basis for the sale. That is, the buyer has purchased the goods on the reasonable assumption that they were as stated by the seller. When the buyer intends to use the goods for a particular or usual purpose, as contrasted with the ordinary use for which they are customarily sold, the seller makes an implied warranty that the goods will be fit for the purpose when the buyer relies on the seller's skill or judgment to select or furnish suitable goods, and when the seller at the time of contracting knows or has reason to know the buyer's particular purpose and his reliance on the seller's judgment. A merchant seller who makes a sale of goods in which he customarily deals makes an implied warranty of merchantability. The Uniform Commercial Code expressly abolishes the requirement a privies to a limited extent by permitting a suit for breach of warranty to be brought against the seller by members of the buyer's family, his household, and his guests, with respect to personal injury sustained by them. Apart from the express provision made by the Code, there is a conflict of authority as to whether privies of contract is required in other cases, with the trend being toward the abolition of that requirement. At common law the rule was that only the parties to a transaction had my rights relating to it. Accordingly, the buyer could sue his immediate seller for breach of warranties. The rule was stated in the terms that there could be no suit for breach of warranty unless there was a privies of contract. The code expressly abolishes the requirement of privies to a limited extent by permitting a suit for breach of warranty to be bought against the seller by members of the buyer. Apart from the express provision made by the Code, there is a conflict of authority as to whether privies of contract is required in other cases, with the trend being toward the abolition of that requirement.

  • PDF

Performance of fly ash stabilized clay reinforced with human hair fiber

  • Rekha, L. Abi;Keerthana, B.;Ameerlal, H.
    • Geomechanics and Engineering
    • /
    • v.10 no.5
    • /
    • pp.677-687
    • /
    • 2016
  • Industrialization and urbanization are the two phenomena that are going relentless all over the world. The consequence of this economic success has been a massive increase in waste on one hand and increasing demand for suitable sites for construction on the other. Owing to the surplus raw materials and energy requirement needed for manufacturing synthetic fibers, applications of waste fibers for reinforcing soils evidenced to offer economic and environmental benefits. The main objective of the proposed work is to explore the possibilities of improving the strength of soil using fly ash waste as an admixture and Human Hair Fiber (HHF) as reinforcement such that they can be used for construction of embankments and land reclamation projects. The effect of fiber content on soil - fly ash mixture was observed through a series of laboratory tests such as compaction tests, CBR and unconfined compression tests. From the stress - strain curves, it was observed that the UCC strength for the optimised soil - flyash mixture reinforced with 0.75% human hair fibers is nearly 2.85 times higher than that of the untreated soil. Further, it has been noticed that there is about 7.73 times increase in CBR for the reinforced soil compared to untreated soil. This drastic increase in strength may be due to the fact that HHF offer more pull-out resistance which makes the fibers act like a bridge to prevent further cracking and thereby it improves the toughness which in turn prevent the brittle failure of soil-flyash specimen. Hence, the test results reveal that the inclusion of randomly distributed HHF in soil significantly improves the engineering properties of soil and can be effectively utilized in pavements. SEM analysis explained the change of microstructures and the formation of hydration products that offered increase in strength and it was found to be in accordance with strength tests.

Bench-Scale Evaluation of the Activated Sludge Process for Treatment of a High-Strength Chemical Plant Wastewater (활성슬러지법에 의한 고농도 중화학공장 폐수처리에 관한 연구)

  • 조영하
    • Journal of Environmental Health Sciences
    • /
    • v.19 no.3
    • /
    • pp.1-16
    • /
    • 1993
  • This paper describes an investigation to determine whether the activated sludge (AS) process could be used for the treatment of wastewater at the Union Carbide Coporation (UCC) plant in Seadrift, Texas. This plant presently utilizes a waste stabilization pond (WSP) system for treatment of the wastewater. The treatment system consists of an in-plant primary WSP and two off-plant WSPs (secondary and tertiary WSPs), run in series. The total hydraulic detention time of the WSP system is approximately 150 days. Several laboratory-based treatability studies have been conducted to evaluate the performace of the WSP system and the degradability of specific chemical compounds. From an additional study, it was determined that the WSP system was stressed and occasionally operating near the limit of its treatment capacity. The existing primary WSP plays an important role in the overall treatmemt system, because it not only functions as a pH and organic-strength equalization basin, but also serves as a "preconditioning" basin by fermenting high strength organic wastes to volatile organic acids for subsequent degradation in the escondary WSP. However, in view of pending RCRA legislatin conerning the "proposed organic toxicity characteristics limits" (40 CFR Part261: Federal Register, July, 1988), it is possible that the primary WSP will have to be abandoned in favor of alternative treatment options. Therefore the main purpose of this study was to perform activated sludge treatability evaluations for the development of an alternative to the existing primary WSP treatment ststem. In addition, another purpose was to determine the degradability of bis(2-chloroethyl)ether (Chlorex or CX) and benzene(BZ) in the activated sludge process. The presence of these two chemicals in the wastewater of the plant prompted the question of whatedether they could be degraded in an activated sludge system.

  • PDF

Reproduction based Multi-Contents Distribution Platform

  • Lee, Byung-Duck;Lee, Keun-Ho;Han, Seong-Soo;Jeong, Chang-Sung
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • v.15 no.2
    • /
    • pp.695-712
    • /
    • 2021
  • As the use of smart devices is being increased rapidly by the development of internet and IT technology, the contents production and utilization rate are showing higher increase, too. In addition, the type of contents also shows very diverse forms such as education, game, video, UCC, etc. In the meantime, the contents are reproduced in diverse forms by reprocessing the original contents, and they are being serviced through the contents service platform. Therefore, the platform to make the contents reprocessing easy and fast is needed. As the diverse contents distribution channels such as YouTube, SNS, App Service, etc, easier contents distribution platform is needed, and the development of the relevant area is expected. In addition, as the selective consumption of the contents having easy accessibility through diverse smart devices is distinguished, the demand for the platform and service that can identify the contents consumption propensity by individual is being increased. Therefore, in this study, to vitalize the online contents distribution, the contents reproduction and publishing platform, was designed and materialized, which can reproduce and distribute the contents based on the real-time contents editing technology in URL unit and the consumer propensity analysis technology using the data management-based broadcasting contents distribution metadata technology and the edited image contents streaming technology. In addition, in the results of comparing with other platforms through the experiment, the performance superiority of the suggested platform was verified. If the suggested platform is applied to the areas of education, broadcasting, press, etc, the multi-media contents can be reproduced and distributed easily, through which the vitalization of contents-related industry is expected.

Practical Problem-Focused Instructional Design and It's Perception Applying Universal Design (유니버설 디자인을 적용한 체험형 실천적 문제중심 수업 설계 및 수업 인식)

  • Lee, Gyeong-Suk;Jang, Sang-Ock
    • Journal of Korean Home Economics Education Association
    • /
    • v.22 no.2
    • /
    • pp.155-169
    • /
    • 2010
  • This study aims to design practical problem-focused instruction by applying universal design of "Housing" unit of Technology Home Economics in the 10th grade and examine the students' perception on the lesson. The lesson is composed of the following procedures: thinking, problem recognition, problem understanding, information search & alternative search, consideration of the result, and practice plan. To solve problem such as 'What should one do for everyone's convenient and comfortable residential life' practically, we chose the major concern of 'understanding the universal design', 'analysis of cause for environmental change', 'creation of human-concerned residential culture'and performed alternative experience program for the old, the pregnant and the disabled. The students perceived teaching methods and contents positively with interest. They also understood the lesson easily by experiential activity and discussion thus enabling their active participation. It was also found out that the students felt considerable change of their consciousness of living environment of residence and the local community, thus it is concluded that the practical problem-focused instructional design method is very effective.

  • PDF

Contents analyses of teaching·learning research on housing education of home economics for secondary schools (중등학교 주생활교육 교수·학습 개발연구 내용분석)

  • Joo, Hyunjung;Cho, Jaesoon;Choi, Yoori
    • Journal of Korean Home Economics Education Association
    • /
    • v.29 no.3
    • /
    • pp.33-48
    • /
    • 2017
  • The purpose of this research was to analyze the contents of housing teaching learning studies in Home Economics of secondary schools since 2001. The 22 research, drawn from the database 'riss4u', were analyzed in terms of general information of the paper (studied institution & year, implementation & evaluation, subject of study & size) and specific contents of teaching learning plans (theme, curricula & textbooks, methode & # of lessons, resources). The results showed that most studies were reported during the 7th or the 2007 revised curricula period. All, except one doctoral dissertation, were master's theses from a few universities. In all studies, ranging from 2 to 15 lessons, teaching learning plans were implemented and evaluated in the class of the researcher while some were applied in other schools, too. The theme of the teaching learning plans varied but were concentrated on one out of two content elements and two out of six learning elements. The 2007 revised curriculum seems to be an important turning point, not only reinforcing the analyses of the curricular and textbooks in the analyzing stage but also facilitating the use of various methods for the lessons in the developing stage. Practical problem based model was the most frequently adopted, while cooperative learning and ICT served as fundamental although not always mentioned. Various teaching resources such as UCC, reading materials, PPT were developed for the teacher. Activity sheets were the most frequently used for the students, followed by reading materials. Because teaching learning is an essential core of education, teaching learning studies should be more actively conducted and the variety of subject topics, methods and resources should also be obtained by more researchers.